[PATCH 2/2] drm/i915: Handle legacy cursor update as normal update

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Abuse the vblank worker to make the changes as small as possible. We
need a way to sync flip_done, but if we wait on flip_done, all async
tests start failing.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/display/intel_crtc.c    | 21 ++++++++++++++------
 drivers/gpu/drm/i915/display/intel_crtc.h    |  6 ++++--
 drivers/gpu/drm/i915/display/intel_display.c | 10 +++++++---
 3 files changed, 26 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c b/drivers/gpu/drm/i915/display/intel_crtc.c
index 182c6dd64f47..2adcce303271 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -389,8 +389,13 @@ int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
 	return ret;
 }
 
-static bool intel_crtc_needs_vblank_work(const struct intel_crtc_state *crtc_state)
+static bool intel_crtc_needs_vblank_work(const struct intel_atomic_state *state,
+					 const struct intel_crtc_state *crtc_state)
 {
+	/* Always init for legacy cursor update, so we can sync on teardown */
+	if (state->base.legacy_cursor_update)
+		return true;
+
 	return crtc_state->hw.active &&
 		!intel_crtc_needs_modeset(crtc_state) &&
 		!crtc_state->preload_luts &&
@@ -438,7 +443,7 @@ void intel_wait_for_vblank_workers(struct intel_atomic_state *state)
 	int i;
 
 	for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
-		if (!intel_crtc_needs_vblank_work(crtc_state))
+		if (!intel_crtc_needs_vblank_work(state, crtc_state))
 			continue;
 
 		drm_vblank_work_flush(&crtc_state->vblank_work);
@@ -470,6 +475,7 @@ static int intel_mode_vblank_start(const struct drm_display_mode *mode)
 
 /**
  * intel_pipe_update_start() - start update of a set of display registers
+ * @state: the intel atomic state
  * @new_crtc_state: the new crtc state
  *
  * Mark the start of an update to pipe registers that should be updated
@@ -480,7 +486,8 @@ static int intel_mode_vblank_start(const struct drm_display_mode *mode)
  * until a subsequent call to intel_pipe_update_end(). That is done to
  * avoid random delays.
  */
-void intel_pipe_update_start(struct intel_crtc_state *new_crtc_state)
+void intel_pipe_update_start(struct intel_atomic_state *state,
+			     struct intel_crtc_state *new_crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
@@ -497,7 +504,7 @@ void intel_pipe_update_start(struct intel_crtc_state *new_crtc_state)
 	if (new_crtc_state->do_async_flip)
 		return;
 
-	if (intel_crtc_needs_vblank_work(new_crtc_state))
+	if (intel_crtc_needs_vblank_work(state, new_crtc_state))
 		intel_crtc_vblank_work_init(new_crtc_state);
 
 	if (new_crtc_state->vrr.enable) {
@@ -631,13 +638,15 @@ static void dbg_vblank_evade(struct intel_crtc *crtc, ktime_t end) {}
 
 /**
  * intel_pipe_update_end() - end update of a set of display registers
+ * @state: the intel atomic state
  * @new_crtc_state: the new crtc state
  *
  * Mark the end of an update started with intel_pipe_update_start(). This
  * re-enables interrupts and verifies the update was actually completed
  * before a vblank.
  */
-void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
+void intel_pipe_update_end(struct intel_atomic_state *state,
+			   struct intel_crtc_state *new_crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
 	enum pipe pipe = crtc->pipe;
@@ -665,7 +674,7 @@ void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
 	 * Would be slightly nice to just grab the vblank count and arm the
 	 * event outside of the critical section - the spinlock might spin for a
 	 * while ... */
-	if (intel_crtc_needs_vblank_work(new_crtc_state)) {
+	if (intel_crtc_needs_vblank_work(state, new_crtc_state)) {
 		drm_vblank_work_schedule(&new_crtc_state->vblank_work,
 					 drm_crtc_accurate_vblank_count(&crtc->base) + 1,
 					 false);
diff --git a/drivers/gpu/drm/i915/display/intel_crtc.h b/drivers/gpu/drm/i915/display/intel_crtc.h
index 51a4c8df9e65..ca7f45a454a0 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.h
+++ b/drivers/gpu/drm/i915/display/intel_crtc.h
@@ -36,8 +36,10 @@ void intel_crtc_state_reset(struct intel_crtc_state *crtc_state,
 u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc);
 void intel_crtc_vblank_on(const struct intel_crtc_state *crtc_state);
 void intel_crtc_vblank_off(const struct intel_crtc_state *crtc_state);
-void intel_pipe_update_start(struct intel_crtc_state *new_crtc_state);
-void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state);
+void intel_pipe_update_start(struct intel_atomic_state *state,
+			     struct intel_crtc_state *new_crtc_state);
+void intel_pipe_update_end(struct intel_atomic_state *state,
+			   struct intel_crtc_state *new_crtc_state);
 void intel_wait_for_vblank_workers(struct intel_atomic_state *state);
 struct intel_crtc *intel_first_crtc(struct drm_i915_private *i915);
 struct intel_crtc *intel_crtc_for_pipe(struct drm_i915_private *i915,
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 763ab569d8f3..e1ca1f9c3941 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -6604,7 +6604,7 @@ static void intel_update_crtc(struct intel_atomic_state *state,
 	intel_crtc_planes_update_noarm(state, crtc);
 
 	/* Perform vblank evasion around commit operation */
-	intel_pipe_update_start(new_crtc_state);
+	intel_pipe_update_start(state, new_crtc_state);
 
 	commit_pipe_pre_planes(state, crtc);
 
@@ -6612,7 +6612,7 @@ static void intel_update_crtc(struct intel_atomic_state *state,
 
 	commit_pipe_post_planes(state, crtc);
 
-	intel_pipe_update_end(new_crtc_state);
+	intel_pipe_update_end(state, new_crtc_state);
 
 	/*
 	 * We usually enable FIFO underrun interrupts as part of the
@@ -6895,6 +6895,9 @@ static void intel_atomic_cleanup_work(struct work_struct *work)
 	struct intel_crtc *crtc;
 	int i;
 
+	if (state->base.legacy_cursor_update)
+		intel_wait_for_vblank_workers(state);
+
 	for_each_old_intel_crtc_in_state(state, crtc, old_crtc_state, i)
 		intel_color_cleanup_commit(old_crtc_state);
 
@@ -7056,7 +7059,8 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
 	if (state->modeset)
 		intel_set_cdclk_post_plane_update(state);
 
-	intel_wait_for_vblank_workers(state);
+	if (!state->base.legacy_cursor_update)
+		intel_wait_for_vblank_workers(state);
 
 	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
 	 * already, but still need the state for the delayed optimization. To
-- 
2.39.2




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux