On 20/07/2023 18:02, Sripada, Radhakrishna wrote:
Hi Tvrtko,
-----Original Message-----
From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
Sent: Thursday, July 20, 2023 2:17 AM
To: Yang, Fei <fei.yang@xxxxxxxxx>; Sripada, Radhakrishna
<radhakrishna.sripada@xxxxxxxxx>; intel-gfx@xxxxxxxxxxxxxxxxxxxxx
Cc: stable@xxxxxxxxxxxxxxx; Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>; Wilson,
Chris P <chris.p.wilson@xxxxxxxxx>
Subject: Re: [PATCH v2] drm/i915/dpt: Use shmem for dpt objects
On 19/07/2023 21:53, Yang, Fei wrote:
On 18/07/2023 23:51, Radhakrishna Sripada wrote:
Dpt objects that are created from internal get evicted when there is
memory pressure and do not get restored when pinned during scanout.
The pinned page table entries look corrupted and programming the
display engine with the incorrect pte's result in DE throwing pipe faults.
Create DPT objects from shmem and mark the object as dirty when
pinning so that the object is restored when shrinker evicts an unpinned
buffer object.
v2: Unconditionally mark the dpt objects dirty during pinning(Chris).
Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation
for dpt")
Cc: <stable@xxxxxxxxxxxxxxx> # v6.0+
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
Suggested-by: Chris Wilson <chris.p.wilson@xxxxxxxxx>
Signed-off-by: Fei Yang <fei.yang@xxxxxxxxx>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_dpt.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dpt.c
b/drivers/gpu/drm/i915/display/intel_dpt.c
index 7c5fddb203ba..fbfd8f959f17 100644
--- a/drivers/gpu/drm/i915/display/intel_dpt.c
+++ b/drivers/gpu/drm/i915/display/intel_dpt.c
@@ -166,6 +166,8 @@ struct i915_vma *intel_dpt_pin(struct
i915_address_space *vm)
i915_vma_get(vma);
}
+ dpt->obj->mm.dirty = true;
+
atomic_dec(&i915->gpu_error.pending_fb_pin);
intel_runtime_pm_put(&i915->runtime_pm, wakeref);
@@ -261,7 +263,7 @@ intel_dpt_create(struct intel_framebuffer *fb)
dpt_obj = i915_gem_object_create_stolen(i915, size);
if (IS_ERR(dpt_obj) && !HAS_LMEM(i915)) {
drm_dbg_kms(&i915->drm, "Allocating dpt from smem\n");
- dpt_obj = i915_gem_object_create_internal(i915, size);
+ dpt_obj = i915_gem_object_create_shmem(i915, size);
}
if (IS_ERR(dpt_obj))
return ERR_CAST(dpt_obj);
Okay I think I get it after some more looking at the DPT code paths.
Problem seems pretty clear - page tables are stored in dpt_obj and so
are lost when backing store is discarded.
Changing to shmem object indeed looks the easiest option.
Some related thoughts:
1)
I wonder if intel_dpt_suspend/resume remain needed after this patch.
Could you investigate please? On a glance their job was to restore the
PTEs which would be lost from internal objects backing storage. With
shmem objects that content should be preserved.
intel_dpt_suspend is "suspending" the whole VM where, not only the dpt
objects are mapped into, but also the framebuffer objects. I don't have
much knowledge on how the framebuffer objects are managed, but the
suspend
resume path still look necessary to me, unless the content of these
framebuffer objects are also preserved.
I don't think it has anything to do with fb content, but you are correct
it is still needed. Because 9755f055f512 ("drm/i915: Restore memory
mapping for DPT FBs across system suspend/resume") reminds me backing
store for DPT PTEs can be either lmem, stolen or internal (now shmem).
Even though with this patch internal is out of the picture, stolen
remains and so the issue of losing the page table content remains.
Perhaps resume could be optimised to only restore PTEs when VM page
tables are backed by stolen which may win some suspend/resume speed on
some platforms.
I will have to look into how suspend resume will change with the current flow
as you said it can be looked in a later patch.
Thanks!
2)
I wonder if i915_vma_flush_writes should be used (as a companion of
i915_vma_pin_iomap) from DPT dpt_bind_vma, dpt_insert_entries, etc. But
then I am also not sure if it does the right thing for the
i915_gem_object_pin_map path of i915_vma_pin_iomap. Perhaps it should
call __i915_gem_object_flush_map itself for that mapping flavour and
not do the ggtt flushing in that case.
I am not sure if dpt_bind_vma will be called each time during pinning. IMO it gets called
Only when the fb object needs to be bind after and unbind(triggered during obj destroy).
Do you think if i915_vma_flush_writes should not be used if dpt objects are created from internal?
No, I *think* correct API usage is supposed to be: If one uses
i915_vma_pin_iomap() for CPU access, then one should call
i915_vma_flush_writes() after CPU writes are done - presumably as a
barrier to make sure writes are visible before proceeding.
If that is correct, the I noticed problem (or I am missing something),
that i915_vma_flush_writes only does something for the one of the three
ways i915_vma_pin_iomap() can set up the CPU visible mapping (the
ggtt->iomap path).
The i915_gem_object_lmem_io_map() path, relevant on dgfx, has no
flushing. Maybe it does need it due WC, or maybe flushing the
write-combine buffers would still be needed.
And the i915_gem_object_pin_map() path is also WC and in theory there is
the corresponding __i915_gem_object_flush_map().
Don't know, maybe I am indeed missing something.
But for instance if __i915_gem_object_flush_map() *was* called from
i915_vma_flush_writes(), and the latter *was* called after dpt_bind_vma
does its thing, then notice how obj->mm.dirty *would* be set by that
helper. Removing the need for this patch.
So perhaps i915_vma_flush_writes() should just dirty the object, *if*
the idea is to be called after CPU writes. And perhaps it should call
i915_gem_object_flush_map *if* the method of mmaping was other than
ggtt. But the information would have to be recorded first, probably same
as the i915_gem_object_pin_map() path records it in the bit 0 of the
vma->iomap pointer.
Or should we have a different flavor of i915_vm_pin_iomap that skips i915_vma_set_ggtt_write
so that we can drop i915_vma_flush_writes during unpinning and move i915_vma_set_ggtt_write
to dpt_insert_entires and do i915_vma_flush during clear range? Then I guess __i915_gem_object_flush_map
called during vma bind and not object pinning. In either case I believe it is a larger cleanup
which requires more extensive validation and analysis.
Yes definitely wasn't suggesting to do it in this patch.
In summary I think the fix is safe and correct but at least point 1) I
think needs looking into. It can be a follow up work too.
If you think this fix can work then I will look into the suspend/resume as a follow up and will appreciate
an r-b for this change. I believe 2) is a larger cleanup that may not be immediately required. I will have
to dig more into the ramifications of the changes proposed above.
Thoughts ?
Yeah it is fine. I assumed someone else would r-b but I can too.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>
Regards,
Tvrtko
