Re: [PATCH v12 24/24] docs: vfio: Add vfio device cdev description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri,  2 Jun 2023 05:16:53 -0700
Yi Liu <yi.l.liu@xxxxxxxxx> wrote:

> This gives notes for userspace applications on device cdev usage.
> 
> Reviewed-by: Kevin Tian <kevin.tian@xxxxxxxxx>
> Signed-off-by: Yi Liu <yi.l.liu@xxxxxxxxx>
> ---
>  Documentation/driver-api/vfio.rst | 132 ++++++++++++++++++++++++++++++
>  1 file changed, 132 insertions(+)
> 
> diff --git a/Documentation/driver-api/vfio.rst b/Documentation/driver-api/vfio.rst
> index 363e12c90b87..f00c9b86bda0 100644
> --- a/Documentation/driver-api/vfio.rst
> +++ b/Documentation/driver-api/vfio.rst
> @@ -239,6 +239,130 @@ group and can access them as follows::
>  	/* Gratuitous device reset and go... */
>  	ioctl(device, VFIO_DEVICE_RESET);
>  
> +IOMMUFD and vfio_iommu_type1
> +----------------------------
> +
> +IOMMUFD is the new user API to manage I/O page tables from userspace.
> +It intends to be the portal of delivering advanced userspace DMA
> +features (nested translation [5]_, PASID [6]_, etc.) while also providing
> +a backwards compatibility interface for existing VFIO_TYPE1v2_IOMMU use
> +cases.  Eventually the vfio_iommu_type1 driver, as well as the legacy
> +vfio container and group model is intended to be deprecated.
> +
> +The IOMMUFD backwards compatibility interface can be enabled two ways.
> +In the first method, the kernel can be configured with
> +CONFIG_IOMMUFD_VFIO_CONTAINER, in which case the IOMMUFD subsystem
> +transparently provides the entire infrastructure for the VFIO
> +container and IOMMU backend interfaces.  The compatibility mode can
> +also be accessed if the VFIO container interface, ie. /dev/vfio/vfio is
> +simply symlink'd to /dev/iommu.  Note that at the time of writing, the
> +compatibility mode is not entirely feature complete relative to
> +VFIO_TYPE1v2_IOMMU (ex. DMA mapping MMIO) and does not attempt to
> +provide compatibility to the VFIO_SPAPR_TCE_IOMMU interface.  Therefore
> +it is not generally advisable at this time to switch from native VFIO
> +implementations to the IOMMUFD compatibility interfaces.
> +
> +Long term, VFIO users should migrate to device access through the cdev
> +interface described below, and native access through the IOMMUFD
> +provided interfaces.
> +
> +VFIO Device cdev
> +----------------
> +
> +Traditionally user acquires a device fd via VFIO_GROUP_GET_DEVICE_FD
> +in a VFIO group.
> +
> +With CONFIG_VFIO_DEVICE_CDEV=y the user can now acquire a device fd
> +by directly opening a character device /dev/vfio/devices/vfioX where
> +"X" is the number allocated uniquely by VFIO for registered devices.
> +cdev interface does not support noiommu, so user should use the legacy
> +group interface if noiommu is needed.
> +
> +The cdev only works with IOMMUFD.  Both VFIO drivers and applications
> +must adapt to the new cdev security model which requires using
> +VFIO_DEVICE_BIND_IOMMUFD to claim DMA ownership before starting to
> +actually use the device.  Once BIND succeeds then a VFIO device can
> +be fully accessed by the user.
> +
> +VFIO device cdev doesn't rely on VFIO group/container/iommu drivers.
> +Hence those modules can be fully compiled out in an environment
> +where no legacy VFIO application exists.
> +
> +So far SPAPR does not support IOMMUFD yet.  So it cannot support device
> +cdev neither.

s/neither/either/

Unless I missed it, we've not described that vfio device cdev access is
still bound by IOMMU group semantics, ie. there can be one DMA owner
for the group.  That's a pretty common failure point for multi-function
consumer device use cases, so the why, where, and how it fails should
be well covered.

In general there's been a lot of cross collaboration to get the series
this far.  I see an abundance of Tested-by, but unfortunately not a lot
of Reviewed-by beyond about the first 1/3rd of the series.  Thanks,

Alex

> +
> +Device cdev Example
> +-------------------
> +
> +Assume user wants to access PCI device 0000:6a:01.0::
> +
> +	$ ls /sys/bus/pci/devices/0000:6a:01.0/vfio-dev/
> +	vfio0
> +
> +This device is therefore represented as vfio0.  The user can verify
> +its existence::
> +
> +	$ ls -l /dev/vfio/devices/vfio0
> +	crw------- 1 root root 511, 0 Feb 16 01:22 /dev/vfio/devices/vfio0
> +	$ cat /sys/bus/pci/devices/0000:6a:01.0/vfio-dev/vfio0/dev
> +	511:0
> +	$ ls -l /dev/char/511\:0
> +	lrwxrwxrwx 1 root root 21 Feb 16 01:22 /dev/char/511:0 -> ../vfio/devices/vfio0
> +
> +Then provide the user with access to the device if unprivileged
> +operation is desired::
> +
> +	$ chown user:user /dev/vfio/devices/vfio0
> +
> +Finally the user could get cdev fd by::
> +
> +	cdev_fd = open("/dev/vfio/devices/vfio0", O_RDWR);
> +
> +An opened cdev_fd doesn't give the user any permission of accessing
> +the device except binding the cdev_fd to an iommufd.  After that point
> +then the device is fully accessible including attaching it to an
> +IOMMUFD IOAS/HWPT to enable userspace DMA::
> +
> +	struct vfio_device_bind_iommufd bind = {
> +		.argsz = sizeof(bind),
> +		.flags = 0,
> +	};
> +	struct iommu_ioas_alloc alloc_data  = {
> +		.size = sizeof(alloc_data),
> +		.flags = 0,
> +	};
> +	struct vfio_device_attach_iommufd_pt attach_data = {
> +		.argsz = sizeof(attach_data),
> +		.flags = 0,
> +	};
> +	struct iommu_ioas_map map = {
> +		.size = sizeof(map),
> +		.flags = IOMMU_IOAS_MAP_READABLE |
> +			 IOMMU_IOAS_MAP_WRITEABLE |
> +			 IOMMU_IOAS_MAP_FIXED_IOVA,
> +		.__reserved = 0,
> +	};
> +
> +	iommufd = open("/dev/iommu", O_RDWR);
> +
> +	bind.iommufd = iommufd;
> +	ioctl(cdev_fd, VFIO_DEVICE_BIND_IOMMUFD, &bind);
> +
> +	ioctl(iommufd, IOMMU_IOAS_ALLOC, &alloc_data);
> +	attach_data.pt_id = alloc_data.out_ioas_id;
> +	ioctl(cdev_fd, VFIO_DEVICE_ATTACH_IOMMUFD_PT, &attach_data);
> +
> +	/* Allocate some space and setup a DMA mapping */
> +	map.user_va = (int64_t)mmap(0, 1024 * 1024, PROT_READ | PROT_WRITE,
> +				    MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
> +	map.iova = 0; /* 1MB starting at 0x0 from device view */
> +	map.length = 1024 * 1024;
> +	map.ioas_id = alloc_data.out_ioas_id;;
> +
> +	ioctl(iommufd, IOMMU_IOAS_MAP, &map);
> +
> +	/* Other device operations as stated in "VFIO Usage Example" */
> +
>  VFIO User API
>  -------------------------------------------------------------------------------
>  
> @@ -566,3 +690,11 @@ This implementation has some specifics:
>  				\-0d.1
>  
>  	00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
> +
> +.. [5] Nested translation is an IOMMU feature which supports two stage
> +   address translations.  This improves the address translation efficiency
> +   in IOMMU virtualization.
> +
> +.. [6] PASID stands for Process Address Space ID, introduced by PCI
> +   Express.  It is a prerequisite for Shared Virtual Addressing (SVA)
> +   and Scalable I/O Virtualization (Scalable IOV).




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux