On Thu, Jun 08, 2023 at 03:02:18PM +0530, Arun R Murthy wrote:
> At the begining of the aux transfer a check for aux control busy bit is
> done. Then as per the spec on aux transfer timeout, need to retry
> freshly for 3 times with a delay which is taken care by the control
> register.
> On each of these 3 trials a check for busy has to be done so as to start
> freshly.
>
> v2: updated the commit message
>
> Signed-off-by: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_dp_aux.c | 50 +++++++++------------
> 1 file changed, 22 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c b/drivers/gpu/drm/i915/display/intel_dp_aux.c
> index 197c6e81db14..25090542dd9f 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c
> @@ -273,30 +273,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> * it using the same AUX CH simultaneously
> */
>
> - /* Try to wait for any previous AUX channel activity */
> - for (try = 0; try < 3; try++) {
> - status = intel_de_read_notrace(i915, ch_ctl);
> - if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
> - break;
> - msleep(1);
> - }
> - /* just trace the final value */
> - trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
> -
> - if (try == 3) {
> - const u32 status = intel_de_read(i915, ch_ctl);
> -
> - if (status != intel_dp->aux_busy_last_status) {
> - drm_WARN(&i915->drm, 1,
> - "%s: not started (status 0x%08x)\n",
> - intel_dp->aux.name, status);
> - intel_dp->aux_busy_last_status = status;
> - }
> -
> - ret = -EBUSY;
> - goto out;
> - }
> -
> /* Only 5 data registers! */
> if (drm_WARN_ON(&i915->drm, send_bytes > 20 || recv_size > 20)) {
> ret = -E2BIG;
> @@ -304,14 +280,31 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> }
>
> while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) {
> - u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
> + /* Must try at least 3 times according to DP spec */
> + for (try = 0; try < 5; try++) {
> + u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
> send_bytes,
> aux_clock_divider);
>
> - send_ctl |= aux_send_ctl_flags;
> + send_ctl |= aux_send_ctl_flags;
Why is send_ctl recomputed in each iteration?
> +
> + /* Try to wait for any previous AUX channel activity */
> + status = intel_dp_aux_wait_done(intel_dp);
How does it help to wait here for the same condition that was already
waited for at the end of the loop?
> + /* just trace the final value */
> + trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
> +
> + if (status & DP_AUX_CH_CTL_SEND_BUSY) {
> + drm_WARN(&i915->drm, 1,
> + "%s: not started, previous Tx still in process (status 0x%08x)\n",
> + intel_dp->aux.name, status);
> + intel_dp->aux_busy_last_status = status;
> + if (try > 3) {
> + ret = -EBUSY;
> + goto out;
> + } else
> + continue;
> + }
>
> - /* Must try at least 3 times according to DP spec */
> - for (try = 0; try < 5; try++) {
> /* Load the send data into the aux channel data registers */
> for (i = 0; i < send_bytes; i += 4)
> intel_de_write(i915, ch_data[i >> 2],
> @@ -321,6 +314,7 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> /* Send the command and wait for it to complete */
> intel_de_write(i915, ch_ctl, send_ctl);
>
> + /* TODO: if typeC then 4.2ms else 800us. For DG2 add 1.5ms for both cases */
> status = intel_dp_aux_wait_done(intel_dp);
>
> /* Clear done status and any errors */
> --
> 2.25.1
>
