As part of restart on AUX xfer timeout, check for busy status and then
start sending the data.
Signed-off-by: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_dp_aux.c | 50 +++++++++------------
1 file changed, 22 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c b/drivers/gpu/drm/i915/display/intel_dp_aux.c
index 197c6e81db14..25090542dd9f 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c
@@ -273,30 +273,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
* it using the same AUX CH simultaneously
*/
- /* Try to wait for any previous AUX channel activity */
- for (try = 0; try < 3; try++) {
- status = intel_de_read_notrace(i915, ch_ctl);
- if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
- break;
- msleep(1);
- }
- /* just trace the final value */
- trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
-
- if (try == 3) {
- const u32 status = intel_de_read(i915, ch_ctl);
-
- if (status != intel_dp->aux_busy_last_status) {
- drm_WARN(&i915->drm, 1,
- "%s: not started (status 0x%08x)\n",
- intel_dp->aux.name, status);
- intel_dp->aux_busy_last_status = status;
- }
-
- ret = -EBUSY;
- goto out;
- }
-
/* Only 5 data registers! */
if (drm_WARN_ON(&i915->drm, send_bytes > 20 || recv_size > 20)) {
ret = -E2BIG;
@@ -304,14 +280,31 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
}
while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) {
- u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
+ /* Must try at least 3 times according to DP spec */
+ for (try = 0; try < 5; try++) {
+ u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
send_bytes,
aux_clock_divider);
- send_ctl |= aux_send_ctl_flags;
+ send_ctl |= aux_send_ctl_flags;
+
+ /* Try to wait for any previous AUX channel activity */
+ status = intel_dp_aux_wait_done(intel_dp);
+ /* just trace the final value */
+ trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
+
+ if (status & DP_AUX_CH_CTL_SEND_BUSY) {
+ drm_WARN(&i915->drm, 1,
+ "%s: not started, previous Tx still in process (status 0x%08x)\n",
+ intel_dp->aux.name, status);
+ intel_dp->aux_busy_last_status = status;
+ if (try > 3) {
+ ret = -EBUSY;
+ goto out;
+ } else
+ continue;
+ }
- /* Must try at least 3 times according to DP spec */
- for (try = 0; try < 5; try++) {
/* Load the send data into the aux channel data registers */
for (i = 0; i < send_bytes; i += 4)
intel_de_write(i915, ch_data[i >> 2],
@@ -321,6 +314,7 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
/* Send the command and wait for it to complete */
intel_de_write(i915, ch_ctl, send_ctl);
+ /* TODO: if typeC then 4.2ms else 800us. For DG2 add 1.5ms for both cases */
status = intel_dp_aux_wait_done(intel_dp);
/* Clear done status and any errors */
--
2.25.1
