Re: [PATCH 01/13] drm/i915/dp: Consider output_format while computing dsc bpp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 12, 2023 at 11:54:05AM +0530, Ankit Nautiyal wrote:
> While using DSC the compressed bpp is computed assuming RGB output
> format. Consider the output_format and compute the compressed bpp
> during mode valid and compute config steps.
> 
> For DP-MST we currently use RGB output format only, so continue
> using RGB while computing compressed bpp for MST case.
> 
> v2: Use output_bpp instead for pipe_bpp to clamp compressed_bpp. (Ville)
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>

Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/i915/display/intel_dp.c     | 19 +++++++++++++++++--
>  drivers/gpu/drm/i915/display/intel_dp.h     |  1 +
>  drivers/gpu/drm/i915/display/intel_dp_mst.c |  1 +
>  3 files changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 0cc57681dc4d..263c30948117 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -734,6 +734,7 @@ u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
>  				u32 link_clock, u32 lane_count,
>  				u32 mode_clock, u32 mode_hdisplay,
>  				bool bigjoiner,
> +				enum intel_output_format output_format,
>  				u32 pipe_bpp,
>  				u32 timeslots)
>  {
> @@ -758,6 +759,10 @@ u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
>  	bits_per_pixel = ((link_clock * lane_count) * timeslots) /
>  			 (intel_dp_mode_to_fec_clock(mode_clock) * 8);
>  
> +	/* Bandwidth required for 420 is half, that of 444 format */
> +	if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
> +		bits_per_pixel *= 2;
> +
>  	drm_dbg_kms(&i915->drm, "Max link bpp is %u for %u timeslots "
>  				"total bw %u pixel clock %u\n",
>  				bits_per_pixel, timeslots,
> @@ -1151,11 +1156,16 @@ intel_dp_mode_valid(struct drm_connector *_connector,
>  
>  	if (HAS_DSC(dev_priv) &&
>  	    drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
> +		enum intel_output_format sink_format, output_format;
> +		int pipe_bpp;
> +
> +		sink_format = intel_dp_sink_format(connector, mode);
> +		output_format = intel_dp_output_format(connector, sink_format);
>  		/*
>  		 * TBD pass the connector BPC,
>  		 * for now U8_MAX so that max BPC on that platform would be picked
>  		 */
> -		int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
> +		pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
>  
>  		/*
>  		 * Output bpp is stored in 6.4 format so right shift by 4 to get the
> @@ -1175,6 +1185,7 @@ intel_dp_mode_valid(struct drm_connector *_connector,
>  							    target_clock,
>  							    mode->hdisplay,
>  							    bigjoiner,
> +							    output_format,
>  							    pipe_bpp, 64) >> 4;
>  			dsc_slice_count =
>  				intel_dp_dsc_get_slice_count(intel_dp,
> @@ -1707,6 +1718,7 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
>  							    adjusted_mode->crtc_clock,
>  							    adjusted_mode->crtc_hdisplay,
>  							    pipe_config->bigjoiner_pipes,
> +							    pipe_config->output_format,
>  							    pipe_bpp,
>  							    timeslots);
>  			/*
> @@ -1742,9 +1754,12 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
>  		 * calculation procedure is bit different for MST case.
>  		 */
>  		if (compute_pipe_bpp) {
> +			u16 output_bpp = intel_dp_output_bpp(pipe_config->output_format,
> +							     pipe_config->pipe_bpp);
> +
>  			pipe_config->dsc.compressed_bpp = min_t(u16,
>  								dsc_max_output_bpp >> 4,
> -								pipe_config->pipe_bpp);
> +								output_bpp);
>  		}
>  		pipe_config->dsc.slice_count = dsc_dp_slice_count;
>  		drm_dbg_kms(&dev_priv->drm, "DSC: compressed bpp %d slice count %d\n",
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> index ef39e4f7a329..db86c2b71c1f 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -107,6 +107,7 @@ u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
>  				u32 link_clock, u32 lane_count,
>  				u32 mode_clock, u32 mode_hdisplay,
>  				bool bigjoiner,
> +				enum intel_output_format output_format,
>  				u32 pipe_bpp,
>  				u32 timeslots);
>  u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 63d61e610210..ee28bb89bffe 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -973,6 +973,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
>  							    target_clock,
>  							    mode->hdisplay,
>  							    bigjoiner,
> +							    INTEL_OUTPUT_FORMAT_RGB,
>  							    pipe_bpp, 64) >> 4;
>  			dsc_slice_count =
>  				intel_dp_dsc_get_slice_count(intel_dp,
> -- 
> 2.25.1

-- 
Ville Syrjälä
Intel



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux