On Thu, 11 May 2023, Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote: > On Thu, May 11, 2023 at 06:21:53PM +0300, Jani Nikula wrote: >> CHV_FUSE_GT (0x182168) is purely about GT fuses, therefore belongs in >> intel_gt_regs.h, is in the gcfgmmio unit, but is technically in the VLV >> display base area. >> >> Add VLV_GUNIT_BASE to drop dependency on VLV_DISPLAY_BASE and thus >> display/intel_display_reg_defs.h in intel_gt_regs.h. >> >> v2: Add VLV_GUNIT_BASE (Ville) >> >> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> >> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> > > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Thanks, pushed to din. > >> --- >> drivers/gpu/drm/i915/gt/intel_gt_regs.h | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/gpu/drm/i915/gt/intel_gt_regs.h b/drivers/gpu/drm/i915/gt/intel_gt_regs.h >> index b8a39c219b60..718cb2c80f79 100644 >> --- a/drivers/gpu/drm/i915/gt/intel_gt_regs.h >> +++ b/drivers/gpu/drm/i915/gt/intel_gt_regs.h >> @@ -7,7 +7,8 @@ >> #define __INTEL_GT_REGS__ >> >> #include "i915_reg_defs.h" >> -#include "display/intel_display_reg_defs.h" /* VLV_DISPLAY_BASE */ >> + >> +#define VLV_GUNIT_BASE 0x180000 >> >> /* >> * The perf control registers are technically multicast registers, but the >> @@ -1469,7 +1470,7 @@ >> #define GEN12_RCU_MODE _MMIO(0x14800) >> #define GEN12_RCU_MODE_CCS_ENABLE REG_BIT(0) >> >> -#define CHV_FUSE_GT _MMIO(VLV_DISPLAY_BASE + 0x2168) >> +#define CHV_FUSE_GT _MMIO(VLV_GUNIT_BASE + 0x2168) >> #define CHV_FGT_DISABLE_SS0 (1 << 10) >> #define CHV_FGT_DISABLE_SS1 (1 << 11) >> #define CHV_FGT_EU_DIS_SS0_R0_SHIFT 16 >> -- >> 2.39.2 -- Jani Nikula, Intel Open Source Graphics Center