> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Sent: Friday, May 5, 2023 4:36 PM
> To: Shankar, Uma <uma.shankar@xxxxxxxxx>
> Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH 5/5] drm/i915: Pick one HDMI port for
> infoframe/audio transmission on g4x
>
> On Thu, May 04, 2023 at 09:13:27PM +0000, Shankar, Uma wrote:
> >
> >
> > > -----Original Message-----
> > > From: Intel-gfx <intel-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf
> > > Of Ville Syrjala
> > > Sent: Tuesday, November 8, 2022 1:16 AM
> > > To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > Subject: [PATCH 5/5] drm/i915: Pick one HDMI port for
> > > infoframe/audio transmission on g4x
> > >
> > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > >
> > > On g4x the hardware has only one audio/video DIP block. Thus only
> > > one HDMI port can transmit audio/infoframes at a time.
> > > Currently we pretend that multiple ports can do it at the same time,
> > > but that doesn't actually work for two reasons:
> > > - the state of the single hw block will get clobbered by
> > > the multiple ports, leading to state checker failures
> > > - the hardware will automagically disable audio/infoframe
> > > transmission when enabled on multiple ports
> > >
> > > To fix this let's allow only one of the ports to transmit audio/infoframes at a
> time.
> > > We'll just go over all the HDMI ports and pick the first one that is
> > > otherwise capable of audio/infoframes. Further HDMI ports will be
> > > treated as if they had a DVI sink connected.
> > >
> > > In order to compute this consistently we'll also need to always add
> > > all HDMI ports to the atomic state.
> >
> > Hi Ville,
> > Approach and idea looks nice. One query I had on this is, if we have 2
> > HDMI ports/sink enabled and we treat one of them as DVI due to this
> > limitation. Later if the monitor being treated as HDMI is unplugged, will we get the
> audio on the other monitor without modeset.
>
> Yes. When disabling the HDMI connector g4x_hdmi_connector_atomic_check() will
> add both connectors to the state, and HDMI vs. DVI decisions is redone for both
> connectors.
Oh ok, got it. Thanks Ville for the clarification.
Looks Good to me.
Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> >
> > Regards,
> > Uma Shankar
> >
> > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/display/g4x_hdmi.c | 114 +++++++++++++++++++++-
> > > drivers/gpu/drm/i915/display/g4x_hdmi.h | 4 +
> > > drivers/gpu/drm/i915/display/intel_hdmi.c | 14 ++-
> > > 3 files changed, 129 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/g4x_hdmi.c
> > > b/drivers/gpu/drm/i915/display/g4x_hdmi.c
> > > index fd23aa03cdc4..28d477d7c7e3 100644
> > > --- a/drivers/gpu/drm/i915/display/g4x_hdmi.c
> > > +++ b/drivers/gpu/drm/i915/display/g4x_hdmi.c
> > > @@ -6,6 +6,7 @@
> > > */
> > >
> > > #include "g4x_hdmi.h"
> > > +#include "intel_atomic.h"
> > > #include "intel_audio.h"
> > > #include "intel_connector.h"
> > > #include "intel_crtc.h"
> > > @@ -78,17 +79,66 @@ static bool intel_hdmi_get_hw_state(struct
> > > intel_encoder *encoder,
> > > return ret;
> > > }
> > >
> > > +static bool connector_is_hdmi(struct drm_connector *connector) {
> > > + struct intel_encoder *encoder =
> > > + intel_attached_encoder(to_intel_connector(connector));
> > > +
> > > + return encoder && encoder->type == INTEL_OUTPUT_HDMI; }
> > > +
> > > +static bool g4x_compute_has_hdmi_sink(struct intel_atomic_state *state,
> > > + struct intel_crtc *this_crtc) {
> > > + const struct drm_connector_state *conn_state;
> > > + struct drm_connector *connector;
> > > + int i;
> > > +
> > > + /*
> > > + * On g4x only one HDMI port can transmit infoframes/audio at
> > > + * any given time. Select the first suitable port for this duty.
> > > + *
> > > + * See also g4x_hdmi_connector_atomic_check().
> > > + */
> > > + for_each_new_connector_in_state(&state->base, connector,
> > > +conn_state, i)
> > > {
> > > + struct intel_encoder *encoder = to_intel_encoder(conn_state-
> > > >best_encoder);
> > > + const struct intel_crtc_state *crtc_state;
> > > + struct intel_crtc *crtc;
> > > +
> > > + if (!connector_is_hdmi(connector))
> > > + continue;
> > > +
> > > + crtc = to_intel_crtc(conn_state->crtc);
> > > + if (!crtc)
> > > + continue;
> > > +
> > > + crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
> > > +
> > > + if (!intel_hdmi_compute_has_hdmi_sink(encoder, crtc_state,
> > > conn_state))
> > > + continue;
> > > +
> > > + return crtc == this_crtc;
> > > + }
> > > +
> > > + return false;
> > > +}
> > > +
> > > static int g4x_hdmi_compute_config(struct intel_encoder *encoder,
> > > struct intel_crtc_state *crtc_state,
> > > struct drm_connector_state *conn_state) {
> > > + struct intel_atomic_state *state =
> > > +to_intel_atomic_state(crtc_state-
> > > >uapi.state);
> > > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > >
> > > if (HAS_PCH_SPLIT(i915))
> > > crtc_state->has_pch_encoder = true;
> > >
> > > - crtc_state->has_hdmi_sink =
> > > - intel_hdmi_compute_has_hdmi_sink(encoder, crtc_state,
> > > conn_state);
> > > + if (IS_G4X(i915))
> > > + crtc_state->has_hdmi_sink = g4x_compute_has_hdmi_sink(state,
> > > crtc);
> > > + else
> > > + crtc_state->has_hdmi_sink =
> > > + intel_hdmi_compute_has_hdmi_sink(encoder, crtc_state,
> > > conn_state);
> > >
> > > return intel_hdmi_compute_config(encoder, crtc_state, conn_state);
> > > } @@
> > > -532,6 +582,66 @@ intel_hdmi_hotplug(struct intel_encoder *encoder,
> > > return state;
> > > }
> > >
> > > +int g4x_hdmi_connector_atomic_check(struct drm_connector *connector,
> > > + struct drm_atomic_state *state) {
> > > + struct drm_i915_private *i915 = to_i915(state->dev);
> > > + struct drm_connector_list_iter conn_iter;
> > > + struct drm_connector *conn;
> > > + int ret;
> > > +
> > > + ret = intel_digital_connector_atomic_check(connector, state);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + if (!IS_G4X(i915))
> > > + return 0;
> > > +
> > > + if (!intel_connector_needs_modeset(to_intel_atomic_state(state),
> > > connector))
> > > + return 0;
> > > +
> > > + /*
> > > + * On g4x only one HDMI port can transmit infoframes/audio
> > > + * at any given time. Make sure all enabled HDMI ports are
> > > + * included in the state so that it's possible to select
> > > + * one of them for this duty.
> > > + *
> > > + * See also g4x_compute_has_hdmi_sink().
> > > + */
> > > + drm_connector_list_iter_begin(&i915->drm, &conn_iter);
> > > + drm_for_each_connector_iter(conn, &conn_iter) {
> > > + struct drm_connector_state *conn_state;
> > > + struct drm_crtc_state *crtc_state;
> > > + struct drm_crtc *crtc;
> > > +
> > > + if (!connector_is_hdmi(conn))
> > > + continue;
> > > +
> > > + drm_dbg_kms(&i915->drm, "Adding [CONNECTOR:%d:%s]\n",
> > > + conn->base.id, conn->name);
> > > +
> > > + conn_state = drm_atomic_get_connector_state(state, conn);
> > > + if (IS_ERR(conn_state)) {
> > > + ret = PTR_ERR(conn_state);
> > > + break;
> > > + }
> > > +
> > > + crtc = conn_state->crtc;
> > > + if (!crtc)
> > > + continue;
> > > +
> > > + crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> > > + crtc_state->mode_changed = true;
> > > +
> > > + ret = drm_atomic_add_affected_planes(state, crtc);
> > > + if (ret)
> > > + break;
> > > + }
> > > + drm_connector_list_iter_end(&conn_iter);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > void g4x_hdmi_init(struct drm_i915_private *dev_priv,
> > > i915_reg_t hdmi_reg, enum port port) { diff --git
> > > a/drivers/gpu/drm/i915/display/g4x_hdmi.h
> > > b/drivers/gpu/drm/i915/display/g4x_hdmi.h
> > > index db9a93bc9321..1e3ea7f3c846 100644
> > > --- a/drivers/gpu/drm/i915/display/g4x_hdmi.h
> > > +++ b/drivers/gpu/drm/i915/display/g4x_hdmi.h
> > > @@ -11,9 +11,13 @@
> > > #include "i915_reg_defs.h"
> > >
> > > enum port;
> > > +struct drm_atomic_state;
> > > +struct drm_connector;
> > > struct drm_i915_private;
> > >
> > > void g4x_hdmi_init(struct drm_i915_private *dev_priv,
> > > i915_reg_t hdmi_reg, enum port port);
> > > +int g4x_hdmi_connector_atomic_check(struct drm_connector *connector,
> > > + struct drm_atomic_state *state);
> > >
> > > #endif
> > > diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > index 2425a9f59b90..d93aab847548 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > @@ -40,6 +40,7 @@
> > > #include <drm/drm_edid.h>
> > > #include <drm/intel_lpe_audio.h>
> > >
> > > +#include "g4x_hdmi.h"
> > > #include "i915_debugfs.h"
> > > #include "i915_drv.h"
> > > #include "intel_atomic.h"
> > > @@ -2590,10 +2591,21 @@ static const struct drm_connector_funcs
> > > intel_hdmi_connector_funcs = {
> > > .atomic_duplicate_state = intel_digital_connector_duplicate_state,
> > > };
> > >
> > > +static int intel_hdmi_connector_atomic_check(struct drm_connector
> *connector,
> > > + struct drm_atomic_state *state) {
> > > + struct drm_i915_private *i915 = to_i915(state->dev);
> > > +
> > > + if (HAS_DDI(i915))
> > > + return intel_digital_connector_atomic_check(connector, state);
> > > + else
> > > + return g4x_hdmi_connector_atomic_check(connector, state); }
> > > +
> > > static const struct drm_connector_helper_funcs
> > > intel_hdmi_connector_helper_funcs = {
> > > .get_modes = intel_hdmi_get_modes,
> > > .mode_valid = intel_hdmi_mode_valid,
> > > - .atomic_check = intel_digital_connector_atomic_check,
> > > + .atomic_check = intel_hdmi_connector_atomic_check,
> > > };
> > >
> > > static void
> > > --
> > > 2.37.4
> >
>
> --
> Ville Syrjälä
> Intel
