Re: [PATCH 05/13] drm/i915/mtl: Add voltage swing sequence for C20

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Intel-gfx <intel-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of Mika
> Kahola
> Sent: Thursday, April 20, 2023 6:11 PM
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Subject:  [PATCH 05/13] drm/i915/mtl: Add voltage swing sequence
> for C20
> 
> DP1.4 and DP20 voltage swing sequence for C20 phy.
> 
> Bspec: 65449, 67636, 67610
> 
> Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
> Signed-off-by: Clint Taylor <Clinton.A.Taylor@xxxxxxxxx>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
> ---

Reviewed-by: Arun R Murthy <arun.r.murthy@xxxxxxxxx>

Thanks and Regards,
Arun R Murthy
-------------------
>  .../gpu/drm/i915/display/intel_cx0_phy_regs.h |  4 ++
>  .../drm/i915/display/intel_ddi_buf_trans.c    | 53 ++++++++++++++++++-
>  2 files changed, 55 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> index a5e5bee24533..5305cc8aad8e 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> @@ -211,6 +211,10 @@
>  #define   C20_MULTIPLIER_MASK		REG_GENMASK(11, 0)
>  #define   C20_PHY_USE_MPLLB		REG_BIT(7)
> 
> +/* C20 Phy VSwing Masks */
> +#define C20_PHY_VSWING_PREEMPH_MASK	REG_GENMASK8(5, 0)
> +#define C20_PHY_VSWING_PREEMPH(val)
> 	REG_FIELD_PREP8(C20_PHY_VSWING_PREEMPH_MASK, val)
> +
>  #define RAWLANEAONX_DIG_TX_MPLLB_CAL_DONE_BANK(idx) (0x303D +
> (idx))
> 
>  #endif /* __INTEL_CX0_REG_DEFS_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> index cd4becbae098..b7d20485bde5 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> @@ -9,6 +9,7 @@
>  #include "intel_de.h"
>  #include "intel_display_types.h"
>  #include "intel_dp.h"
> +#include "intel_cx0_phy.h"
> 
>  /* HDMI/DVI modes ignore everything but the last 2 items. So we share
>   * them for both DP and FDI transports, allowing those ports to @@ -
> 1048,12 +1049,52 @@ static const union intel_ddi_buf_trans_entry
> _mtl_c10_trans_dp14[] = {
>  	{ .snps = { 62, 0, 0  } },      /* preset 9 */
>  };
> 
> -static const struct intel_ddi_buf_trans mtl_cx0c10_trans = {
> +static const struct intel_ddi_buf_trans mtl_cx0_trans = {
>  	.entries = _mtl_c10_trans_dp14,
>  	.num_entries = ARRAY_SIZE(_mtl_c10_trans_dp14),
>  	.hdmi_default_entry = ARRAY_SIZE(_mtl_c10_trans_dp14) - 1,  };
> 
> +/* DP2.0 */
> +static const union intel_ddi_buf_trans_entry _mtl_c20_trans_uhbr[] = {
> +	{ .snps = { 48, 0, 0 } },       /* preset 0 */
> +	{ .snps = { 43, 0, 5 } },       /* preset 1 */
> +	{ .snps = { 40, 0, 8 } },       /* preset 2 */
> +	{ .snps = { 37, 0, 11 } },      /* preset 3 */
> +	{ .snps = { 33, 0, 15 } },      /* preset 4 */
> +	{ .snps = { 46, 2, 0 } },       /* preset 5 */
> +	{ .snps = { 42, 2, 4 } },       /* preset 6 */
> +	{ .snps = { 38, 2, 8 } },       /* preset 7 */
> +	{ .snps = { 35, 2, 11 } },      /* preset 8 */
> +	{ .snps = { 33, 2, 13 } },      /* preset 9 */
> +	{ .snps = { 44, 4, 0 } },       /* preset 10 */
> +	{ .snps = { 40, 4, 4 } },       /* preset 11 */
> +	{ .snps = { 37, 4, 7 } },       /* preset 12 */
> +	{ .snps = { 33, 4, 11 } },      /* preset 13 */
> +	{ .snps = { 40, 8, 0 } },	/* preset 14 */
> +	{ .snps = { 28, 2, 2 } },	/* preset 15 */
> +};
> +
> +/* HDMI2.0 */
> +static const union intel_ddi_buf_trans_entry _mtl_c20_trans_hdmi[] = {
> +	{ .snps = { 48, 0, 0 } },       /* preset 0 */
> +	{ .snps = { 38, 4, 6 } },       /* preset 1 */
> +	{ .snps = { 36, 4, 8 } },       /* preset 2 */
> +	{ .snps = { 34, 4, 10 } },      /* preset 3 */
> +	{ .snps = { 32, 4, 12 } },      /* preset 4 */
> +};
> +
> +static const struct intel_ddi_buf_trans mtl_c20_trans_hdmi = {
> +	.entries = _mtl_c20_trans_hdmi,
> +	.num_entries = ARRAY_SIZE(_mtl_c20_trans_hdmi),
> +	.hdmi_default_entry = 0,
> +};
> +
> +static const struct intel_ddi_buf_trans mtl_c20_trans_uhbr = {
> +	.entries = _mtl_c20_trans_uhbr,
> +	.num_entries = ARRAY_SIZE(_mtl_c20_trans_uhbr), };
> +
>  bool is_hobl_buf_trans(const struct intel_ddi_buf_trans *table)  {
>  	return table == &tgl_combo_phy_trans_edp_hbr2_hobl;
> @@ -1630,7 +1671,15 @@ mtl_get_cx0_buf_trans(struct intel_encoder
> *encoder,
>  		      const struct intel_crtc_state *crtc_state,
>  		      int *n_entries)
>  {
> -	return intel_get_buf_trans(&mtl_cx0c10_trans, n_entries);
> +	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> +	enum phy phy = intel_port_to_phy(i915, encoder->port);
> +
> +	if (intel_crtc_has_dp_encoder(crtc_state) && crtc_state->port_clock
> >= 1000000)
> +		return intel_get_buf_trans(&mtl_c20_trans_uhbr, n_entries);
> +	else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) &&
> !(intel_is_c10phy(i915, phy)))
> +		return intel_get_buf_trans(&mtl_c20_trans_hdmi,
> n_entries);
> +	else
> +		return intel_get_buf_trans(&mtl_cx0_trans, n_entries);
>  }
> 
>  void intel_ddi_buf_trans_init(struct intel_encoder *encoder)
> --
> 2.34.1





[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux