[PATCH 05/14] drm/i915/dsi: Split icl+ D-PHY vs. DSI timing steps

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

The programming of the DPHY vs. DSI _TIMING registers are
two separate steps in the TGL+ bspec sequence, with some
other stuff in between. Implement the same split.
Windows also seems follow the bspec TGL+ sequence, even
on ICL/JSL.

Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 70 ++++++++++++++++----------
 1 file changed, 43 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index b35b69227e6f..89d608747fff 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -528,31 +528,16 @@ gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder,
 	enum port port;
 	enum phy phy;
 
-	/* Program T-INIT master registers */
-	for_each_dsi_port(port, intel_dsi->ports)
-		intel_de_rmw(dev_priv, ICL_DSI_T_INIT_MASTER(port),
-			     DSI_T_INIT_MASTER_MASK, intel_dsi->init_count);
-
 	/* Program DPHY clock lanes timings */
-	for_each_dsi_port(port, intel_dsi->ports) {
+	for_each_dsi_port(port, intel_dsi->ports)
 		intel_de_write(dev_priv, DPHY_CLK_TIMING_PARAM(port),
 			       intel_dsi->dphy_reg);
 
-		/* shadow register inside display core */
-		intel_de_write(dev_priv, DSI_CLK_TIMING_PARAM(port),
-			       intel_dsi->dphy_reg);
-	}
-
 	/* Program DPHY data lanes timings */
-	for_each_dsi_port(port, intel_dsi->ports) {
+	for_each_dsi_port(port, intel_dsi->ports)
 		intel_de_write(dev_priv, DPHY_DATA_TIMING_PARAM(port),
 			       intel_dsi->dphy_data_lane_reg);
 
-		/* shadow register inside display core */
-		intel_de_write(dev_priv, DSI_DATA_TIMING_PARAM(port),
-			       intel_dsi->dphy_data_lane_reg);
-	}
-
 	/*
 	 * If DSI link operating at or below an 800 MHz,
 	 * TA_SURE should be override and programmed to
@@ -561,16 +546,10 @@ gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder,
 	 */
 	if (DISPLAY_VER(dev_priv) == 11) {
 		if (afe_clk(encoder, crtc_state) <= 800000) {
-			for_each_dsi_port(port, intel_dsi->ports) {
+			for_each_dsi_port(port, intel_dsi->ports)
 				intel_de_rmw(dev_priv, DPHY_TA_TIMING_PARAM(port),
 					     TA_SURE_MASK,
 					     TA_SURE_OVERRIDE | TA_SURE(0));
-
-				/* shadow register inside display core */
-				intel_de_rmw(dev_priv, DSI_TA_TIMING_PARAM(port),
-					     TA_SURE_MASK,
-					     TA_SURE_OVERRIDE | TA_SURE(0));
-			}
 		}
 	}
 
@@ -581,6 +560,41 @@ gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder,
 	}
 }
 
+static void
+gen11_dsi_setup_timings(struct intel_encoder *encoder,
+			const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+	enum port port;
+
+	/* Program T-INIT master registers */
+	for_each_dsi_port(port, intel_dsi->ports)
+		intel_de_rmw(dev_priv, ICL_DSI_T_INIT_MASTER(port),
+			     DSI_T_INIT_MASTER_MASK, intel_dsi->init_count);
+
+	/* shadow register inside display core */
+	for_each_dsi_port(port, intel_dsi->ports)
+		intel_de_write(dev_priv, DSI_CLK_TIMING_PARAM(port),
+			       intel_dsi->dphy_reg);
+
+	/* shadow register inside display core */
+	for_each_dsi_port(port, intel_dsi->ports)
+		intel_de_write(dev_priv, DSI_DATA_TIMING_PARAM(port),
+			       intel_dsi->dphy_data_lane_reg);
+
+	/* shadow register inside display core */
+	if (DISPLAY_VER(dev_priv) == 11) {
+		if (afe_clk(encoder, crtc_state) <= 800000) {
+			for_each_dsi_port(port, intel_dsi->ports) {
+				intel_de_rmw(dev_priv, DSI_TA_TIMING_PARAM(port),
+					     TA_SURE_MASK,
+					     TA_SURE_OVERRIDE | TA_SURE(0));
+			}
+		}
+	}
+}
+
 static void gen11_dsi_gate_clocks(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
@@ -1090,12 +1104,14 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
 	/* step 4c: configure voltage swing and skew */
 	gen11_dsi_voltage_swing_program_seq(encoder);
 
-	/* enable DDI buffer */
-	gen11_dsi_enable_ddi_buffer(encoder);
-
 	/* setup D-PHY timings */
 	gen11_dsi_setup_dphy_timings(encoder, crtc_state);
 
+	/* enable DDI buffer */
+	gen11_dsi_enable_ddi_buffer(encoder);
+
+	gen11_dsi_setup_timings(encoder, crtc_state);
+
 	/* Since transcoder is configured to take events from GPIO */
 	gen11_dsi_config_util_pin(encoder, true);
 
-- 
2.39.2




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux