Среда, 28 августа 2013, 16:26 -07:00 от Eric Anholt <eric@xxxxxxxxxx>: > Rinat Ibragimov <ibragimovrinat@xxxxxxx> writes: > > > Понедельник, 26 августа 2013, 16:22 -07:00 от Eric Anholt <eric@xxxxxxxxxx>: > >> Rinat Ibragimov <ibragimovrinat@xxxxxxx> writes: > >> > >> > Понедельник, 26 августа 2013, 13:40 -07:00 от Eric Anholt <eric@xxxxxxxxxx>: > >> >> Ибрагимов Ринат <ibragimovrinat@xxxxxxx> writes: > >> >> > >> >> > libvdpau uses second DRI driver name to determine which VDPAU driver > >> >> > to use. This patch will allow libvdpau choose libvdpau_i965.so on systems > >> >> > with Intel GPUs, libvdpau_nvidia.so on those with nVidia ones, and so on. > >> >> > I'm experimenting now with generic vdpau driver using OpenGL/VA-API, > >> >> > it would be convenient to have this driver selection working without manual > >> >> > driver selection. > >> >> > >> >> If it's a generic driver, why would it need a "i965" string passed over > >> >> the DRI2 protocol to find it? > >> > > >> > It doesn't actually. It's just to simplify distribution package management. > >> > If one names driver libvdpau_nvidia.so.1, it will break VDPAU on > >> > nVidia equipped machines. With this patch one can name it > >> > libvdpau_i965.so.1 and driver will be loaded on intel equipped > >> > machines only. > >> > > >> >> > >> >> One of the things I'm planning on doing is removing use of the > >> >> protocol-provided DRI2 driver name from Mesa -- Mesa knows what drivers > >> >> it has built, and it knows how to detect those devices (in the EGL > >> >> code), so why would we pay attention to what the X Server thinks our > >> >> driver's name is? Seems like vdpau could probably do the same. > >> >> > >> > > >> > VDPAU uses entry point library (libvdpau) which loads backend drivers. > >> > libvdpau uses second DRI2 driver name amongst other methods to determine > >> > which driver to load. It can not rely on Mesa's internal knowledge, because > >> > it must work with proprietary nVidia driver too. > >> > >> Right, I meant "couldn't libvdpau have a method to determine which > >> driver to load based on looking at your hardware, like how Mesa's EGL > >> does?", since only libvdpau is likely to know how pieces of hardware map > >> to driver binaries. > >> > > > > VDPAU drivers have separate code from libvdpau, while Mesa have drivers > > inside it (if I get it right). I can't figure out how libvdpau beeing separate > > can determine mapping between hardware and driver to load. The only way > > is to ask[1] DRI2. > > Yet the Xorg 2D driver is even less related to the set of vdpau drivers > available than the vdpau driver loader (which could do things like look > at a symbol in the driver to find a probing mechanism, like the X Server > does to X drivers, or read some config directory containing mappings > installed by the external drivers). > > The reason I'm making a point of this is that DRI3 is dropping the > driver name strings from the protocol. > Now I see, it should work (with probing mechanism). But there are too many pieces should be touched to get this working, although it looks like the right thing to do. On the other hand, all I'm trying to do is to find minimal change to make driver autoloading work. --- Rinat _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
