Re: [PATCH 4/9] drm/i915/mtl: Add vswing programming for C10 phys

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 12, 2023 at 03:49:20PM -0700, Radhakrishna Sripada wrote:
> From: Mika Kahola <mika.kahola@xxxxxxxxx>
> 
> C10 phys uses direct mapping internally for voltage and pre-emphasis levels.
> Program the levels directly to the fields in the VDR Registers.
> 
> Bspec: 65449
> 
> v2: From table "C10: Tx EQ settings for DP 1.4x" it shows level 1
>     and preemphasis 1 instead of two times of level 1 preemphasis 0.
>     Fix this in the driver code as well.
> v3: VSwing update (Clint)
> v4: Add vboost termination ctl programming(Imre)
>     Fix tx llogic and other nits
>     Restrict C10 vdr ctl register access for C10 phy(RK)
> 
> Cc: Imre Deak <imre.deak@xxxxxxxxx>
> Cc: Uma Shankar <uma.shankar@xxxxxxxxx>
> Signed-off-by: Clint Taylor <Clinton.A.Taylor@xxxxxxxxx>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
> Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
> Reviewed-by: Imre Deak <imre.deak@xxxxxxxxx>(v3)
> ---
>  drivers/gpu/drm/i915/display/intel_cx0_phy.c  | 102 +++++++++++++++++-
>  drivers/gpu/drm/i915/display/intel_cx0_phy.h  |   2 +
>  .../gpu/drm/i915/display/intel_cx0_phy_regs.h |  14 ++-
>  drivers/gpu/drm/i915/display/intel_ddi.c      |   4 +-
>  .../drm/i915/display/intel_ddi_buf_trans.c    |  31 +++++-
>  5 files changed, 143 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> index 9ab1e686a40b..ca7626eadd7c 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> @@ -6,6 +6,8 @@
>  #include "i915_reg.h"
>  #include "intel_cx0_phy.h"
>  #include "intel_cx0_phy_regs.h"
> +#include "intel_ddi.h"
> +#include "intel_ddi_buf_trans.h"
>  #include "intel_de.h"
>  #include "intel_display_types.h"
>  #include "intel_dp.h"
> @@ -292,6 +294,97 @@ static void intel_cx0_rmw(struct drm_i915_private *i915, enum port port,
>  		__intel_cx0_rmw(i915, port, lane, addr, clear, set, committed);
>  }
>  
> +static u8 intel_c10_get_tx_vboost_lvl(const struct intel_crtc_state *crtc_state)
> +{
> +	if (intel_crtc_has_dp_encoder(crtc_state)) {
> +		if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP) &&
> +		    (crtc_state->port_clock == 540000 ||
> +		     crtc_state->port_clock == 810000))
> +			return 5;
> +		else
> +			return 4;
> +	} else {
> +		return 5;
> +	}
> +}
> +
> +static u8 intel_c10_get_tx_term_ctl(const struct intel_crtc_state *crtc_state)
> +{
> +	if (intel_crtc_has_dp_encoder(crtc_state)) {
> +		if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP) &&
> +		    (crtc_state->port_clock == 540000 ||
> +		     crtc_state->port_clock == 810000))
> +			return 5;
> +		else
> +			return 2;
> +	} else {
> +		return 6;
> +	}
> +}
> +
> +void intel_cx0_phy_set_signal_levels(struct intel_encoder *encoder,
> +				     const struct intel_crtc_state *crtc_state)
> +{
> +	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> +	const struct intel_ddi_buf_trans *trans;
> +	enum phy phy = intel_port_to_phy(i915, encoder->port);
> +	intel_wakeref_t wakeref;
> +	int n_entries, ln;
> +
> +	wakeref = intel_cx0_phy_transaction_begin(encoder);
> +
> +	trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries);
> +	if (drm_WARN_ON_ONCE(&i915->drm, !trans)) {
> +		intel_cx0_phy_transaction_end(encoder, wakeref);
> +		return;
> +	}
> +
> +	if (intel_is_c10phy(i915, phy)) {
> +		intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
> +			      0, C10_VDR_CTRL_MSGBUS_ACCESS, MB_WRITE_COMMITTED);
> +		intel_cx0_rmw(i915, encoder->port, INTEL_CX0_LANE0, PHY_C10_VDR_CMN(3),
> +			      C10_CMN3_TXVBOOST_MASK,
> +			      C10_CMN3_TXVBOOST(intel_c10_get_tx_vboost_lvl(crtc_state)),
> +			      MB_WRITE_UNCOMMITTED);
> +		intel_cx0_rmw(i915, encoder->port, INTEL_CX0_LANE0, PHY_C10_VDR_TX(1),
> +			      C10_TX1_TERMCTL_MASK,
> +			      C10_TX1_TERMCTL(intel_c10_get_tx_term_ctl(crtc_state)),
> +			      MB_WRITE_COMMITTED);

Both PHY lanes need to be programmed for all these vswing settings.

> +	}
> +
> +	for (ln = 0; ln < crtc_state->lane_count; ln++) {
> +		int level = intel_ddi_level(encoder, crtc_state, ln);
> +		int lane, tx;
> +
> +		lane = ln / 2;
> +		tx = ln % 2;
> +
> +		intel_cx0_rmw(i915, encoder->port, BIT(lane), PHY_CX0_VDROVRD_CTL(lane, tx, 0),
> +			      C10_PHY_OVRD_LEVEL_MASK,
> +			      C10_PHY_OVRD_LEVEL(trans->entries[level].snps.pre_cursor),
> +			      MB_WRITE_COMMITTED);
> +		intel_cx0_rmw(i915, encoder->port, BIT(lane), PHY_CX0_VDROVRD_CTL(lane, tx, 1),
> +			      C10_PHY_OVRD_LEVEL_MASK,
> +			      C10_PHY_OVRD_LEVEL(trans->entries[level].snps.vswing),
> +			      MB_WRITE_COMMITTED);
> +		intel_cx0_rmw(i915, encoder->port, BIT(lane), PHY_CX0_VDROVRD_CTL(lane, tx, 2),
> +			      C10_PHY_OVRD_LEVEL_MASK,
> +			      C10_PHY_OVRD_LEVEL(trans->entries[level].snps.post_cursor),
> +			      MB_WRITE_COMMITTED);
> +	}
> +
> +	/* Write Override enables in 0xD71 */
> +	intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_OVRD,
> +		      0, PHY_C10_VDR_OVRD_TX1 | PHY_C10_VDR_OVRD_TX2,
> +		      MB_WRITE_COMMITTED);
> +
> +	if (intel_is_c10phy(i915, phy))
> +		intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
> +			      0, C10_VDR_CTRL_UPDATE_CFG, MB_WRITE_COMMITTED);
> +
> +	intel_cx0_phy_transaction_end(encoder, wakeref);
> +}
> +
>  /*
>   * Basic DP link rates with 38.4 MHz reference clock.
>   * Note: The tables below are with SSC. In non-ssc
> @@ -766,10 +859,8 @@ static void intel_program_port_clock_ctl(struct intel_encoder *encoder,
>  	val |= crtc_state->cx0pll_state.ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0;
>  
>  	intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
> -		     XELPDP_LANE1_PHY_CLOCK_SELECT |
> -		     XELPDP_FORWARD_CLOCK_UNGATE |
> -		     XELPDP_DDI_CLOCK_SELECT_MASK |
> -		     XELPDP_SSC_ENABLE_PLLB, val);
> +		     XELPDP_LANE1_PHY_CLOCK_SELECT | XELPDP_FORWARD_CLOCK_UNGATE |
> +		     XELPDP_DDI_CLOCK_SELECT_MASK | XELPDP_SSC_ENABLE_PLLB, val);
>  }
>  
>  static u32 intel_cx0_get_powerdown_update(u8 lane_mask)
> @@ -1144,7 +1235,8 @@ static void intel_c10pll_disable(struct intel_encoder *encoder)
>  
>  	/* 7. Program PORT_CLOCK_CTL register to disable and gate clocks. */
>  	intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
> -		     XELPDP_DDI_CLOCK_SELECT_MASK |
> +		     XELPDP_DDI_CLOCK_SELECT_MASK, 0);
> +	intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
>  		     XELPDP_FORWARD_CLOCK_UNGATE, 0);
>  }
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.h b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> index 46fa0576ef0d..6b736acb83e0 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> @@ -30,5 +30,7 @@ int intel_c10pll_calc_port_clock(struct intel_encoder *encoder,
>  				 const struct intel_c10pll_state *pll_state);
>  void intel_c10pll_state_verify(struct intel_atomic_state *state,
>  			       struct intel_crtc_state *new_crtc_state);
> +void intel_cx0_phy_set_signal_levels(struct intel_encoder *encoder,
> +				     const struct intel_crtc_state *crtc_state);
>  
>  #endif /* __INTEL_CX0_PHY_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> index 21a699c678a1..9cfa7f508c90 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> @@ -144,6 +144,8 @@
>  #define   C10_CMN3_TXVBOOST(val)	REG_FIELD_PREP8(C10_CMN3_TXVBOOST_MASK, val)
>  #define PHY_C10_VDR_TX(idx)		(0xC30 + (idx))
>  #define   C10_TX0_TX_MPLLB_SEL		REG_BIT(4)
> +#define   C10_TX1_TERMCTL_MASK		REG_GENMASK8(7, 5)
> +#define   C10_TX1_TERMCTL(val)		REG_FIELD_PREP8(C10_TX1_TERMCTL_MASK, val)
>  #define PHY_C10_VDR_CONTROL(idx)	(0xC70 + (idx) - 1)
>  #define   C10_VDR_CTRL_MSGBUS_ACCESS	REG_BIT8(2)
>  #define   C10_VDR_CTRL_MASTER_LANE	REG_BIT8(1)
> @@ -151,9 +153,15 @@
>  #define PHY_C10_VDR_CUSTOM_WIDTH	0xD02
>  #define   C10_VDR_CUSTOM_WIDTH_MASK    REG_GENMASK(1, 0)
>  #define   C10_VDR_CUSTOM_WIDTH_8_10    REG_FIELD_PREP(C10_VDR_CUSTOM_WIDTH_MASK, 0)
> -
> -/* PHY_C10_VDR_PLL0 */
> -#define PLL_C10_MPLL_SSC_EN             REG_BIT8(0)
> +#define PHY_C10_VDR_OVRD		0xD71
> +#define   PHY_C10_VDR_OVRD_TX1		REG_BIT8(0)
> +#define   PHY_C10_VDR_OVRD_TX2		REG_BIT8(2)
> +#define PHY_C10_VDR_PRE_OVRD_TX1	0xD80
> +#define C10_PHY_OVRD_LEVEL_MASK		REG_GENMASK8(5, 0)
> +#define C10_PHY_OVRD_LEVEL(val)		REG_FIELD_PREP8(C10_PHY_OVRD_LEVEL_MASK, val)
> +#define PHY_CX0_VDROVRD_CTL(lane, tx, control)				\
> +					(PHY_C10_VDR_PRE_OVRD_TX1 +	\
> +					 ((lane) ^ (tx)) * 0x10 + (control))
>  
>  /* PIPE SPEC Defined Registers */
>  #define PHY_CX0_TX_CONTROL(tx, control)	(0x400 + ((tx) - 1) * 0x200 + (control))
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 67d3ccd2ea76..b30e3ed7aedb 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4475,7 +4475,9 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>  		encoder->get_config = hsw_ddi_get_config;
>  	}
>  
> -	if (IS_DG2(dev_priv)) {
> +	if (DISPLAY_VER(dev_priv) >= 14) {
> +		encoder->set_signal_levels = intel_cx0_phy_set_signal_levels;
> +	} else if (IS_DG2(dev_priv)) {
>  		encoder->set_signal_levels = intel_snps_phy_set_signal_levels;
>  	} else if (DISPLAY_VER(dev_priv) >= 12) {
>  		if (intel_phy_is_combo(dev_priv, phy))
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> index 006a2e979000..cd4becbae098 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> @@ -1035,6 +1035,25 @@ static const struct intel_ddi_buf_trans dg2_snps_trans_uhbr = {
>  	.num_entries = ARRAY_SIZE(_dg2_snps_trans_uhbr),
>  };
>  
> +static const union intel_ddi_buf_trans_entry _mtl_c10_trans_dp14[] = {
> +	{ .snps = { 26, 0, 0  } },      /* preset 0 */
> +	{ .snps = { 33, 0, 6  } },      /* preset 1 */
> +	{ .snps = { 38, 0, 11 } },      /* preset 2 */
> +	{ .snps = { 43, 0, 19 } },      /* preset 3 */
> +	{ .snps = { 39, 0, 0  } },      /* preset 4 */
> +	{ .snps = { 45, 0, 7  } },      /* preset 5 */
> +	{ .snps = { 46, 0, 13 } },      /* preset 6 */
> +	{ .snps = { 46, 0, 0  } },      /* preset 7 */
> +	{ .snps = { 55, 0, 7  } },      /* preset 8 */
> +	{ .snps = { 62, 0, 0  } },      /* preset 9 */
> +};
> +
> +static const struct intel_ddi_buf_trans mtl_cx0c10_trans = {
> +	.entries = _mtl_c10_trans_dp14,
> +	.num_entries = ARRAY_SIZE(_mtl_c10_trans_dp14),
> +	.hdmi_default_entry = ARRAY_SIZE(_mtl_c10_trans_dp14) - 1,
> +};
> +
>  bool is_hobl_buf_trans(const struct intel_ddi_buf_trans *table)
>  {
>  	return table == &tgl_combo_phy_trans_edp_hbr2_hobl;
> @@ -1606,12 +1625,22 @@ dg2_get_snps_buf_trans(struct intel_encoder *encoder,
>  		return intel_get_buf_trans(&dg2_snps_trans, n_entries);
>  }
>  
> +static const struct intel_ddi_buf_trans *
> +mtl_get_cx0_buf_trans(struct intel_encoder *encoder,
> +		      const struct intel_crtc_state *crtc_state,
> +		      int *n_entries)
> +{
> +	return intel_get_buf_trans(&mtl_cx0c10_trans, n_entries);
> +}
> +
>  void intel_ddi_buf_trans_init(struct intel_encoder *encoder)
>  {
>  	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
>  	enum phy phy = intel_port_to_phy(i915, encoder->port);
>  
> -	if (IS_DG2(i915)) {
> +	if (DISPLAY_VER(i915) >= 14) {
> +		encoder->get_buf_trans = mtl_get_cx0_buf_trans;
> +	} else if (IS_DG2(i915)) {
>  		encoder->get_buf_trans = dg2_get_snps_buf_trans;
>  	} else if (IS_ALDERLAKE_P(i915)) {
>  		if (intel_phy_is_combo(i915, phy))
> -- 
> 2.34.1
> 



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux