On Wed, Aug 28, 2013 at 06:27:16PM +0300, Mika Kuoppala wrote: > Imre Deak <imre.deak@xxxxxxxxx> writes: > > > If need to enable the panel fitter, the crtc timings have to be > > programmed according to the panel's native (fixed) mode. This isn't the > > case atm, since after the encoder changes adjusted_mode to fixed > > mode the crtc_* timing fields of adjusted_mode will stay at their original > > non-native values that the user passed in. This results in a corrupted > > output. > > > > One exception is when we have a second pass of computing encoder configs > > due to bandwidth limitation, since then we'll set adjusted_mode.crtc_* > > fields to the fixed mode values set in the first pass; so in this case > > things will work out. > > > > Fix this by updating the adjusted_mode.crtc_* fields when we set the > > fixed panel mode. > > > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx> > > Daniel, the commit that regressed seem to be > 135c81b8c3c9a70d7b55758c9c2a247a4abb7b64 instead of > 21d8a4756af5fdf4a42e79a77cf3b6f52678d443. > > Reviewed-by: Mika Kuoppala <mika.kuoppala@xxxxxxxxx> Queued for -next, thanks for the patch. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
