If need to enable the panel fitter, the crtc timings have to be programmed according to the panel's native (fixed) mode. This isn't the case atm, since after the encoder changes adjusted_mode to fixed mode the crtc_* timing fields of adjusted_mode will stay at their original non-native values that the user passed in. This results in a corrupted output. One exception is when we have a second pass of computing encoder configs due to bandwidth limitation, since then we'll set adjusted_mode.crtc_* fields to the fixed mode values set in the first pass; so in this case things will work out. Fix this by updating the adjusted_mode.crtc_* fields when we set the fixed panel mode. Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx> --- drivers/gpu/drm/i915/intel_panel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index a43c33b..913cb9d 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -50,6 +50,8 @@ intel_fixed_panel_mode(struct drm_display_mode *fixed_mode, adjusted_mode->vtotal = fixed_mode->vtotal; adjusted_mode->clock = fixed_mode->clock; + + drm_mode_set_crtcinfo(adjusted_mode, 0); } /* adjusted_mode has been preset to be the panel's fixed mode */ -- 1.8.3.2 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
