Re: [PATCH v3 12/12] vfio/pci: Report dev_id in VFIO_DEVICE_GET_PCI_HOT_RESET_INFO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023/4/8 22:20, Alex Williamson wrote:
On Sat, 8 Apr 2023 05:07:16 +0000
"Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:

From: Alex Williamson <alex.williamson@xxxxxxxxxx>
Sent: Saturday, April 8, 2023 5:07 AM

On Fri, 7 Apr 2023 15:47:10 +0000
"Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:
From: Alex Williamson <alex.williamson@xxxxxxxxxx>
Sent: Friday, April 7, 2023 11:14 PM

On Fri, 7 Apr 2023 14:04:02 +0000
"Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:
From: Alex Williamson <alex.williamson@xxxxxxxxxx>
Sent: Friday, April 7, 2023 9:52 PM

On Fri, 7 Apr 2023 13:24:25 +0000
"Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:
From: Alex Williamson <alex.williamson@xxxxxxxxxx>
Sent: Friday, April 7, 2023 8:04 PM
@@ -791,7 +813,21 @@ static int vfio_pci_fill_devs(struct pci_dev
*pdev,
void
*data)
  	if (!iommu_group)
  		return -EPERM; /* Cannot reset non-isolated devices
*/

[1]

Hi Alex,

Is disabling iommu a sane way to test vfio noiommu mode?

Yes
I added intel_iommu=off to disable intel iommu and bind a device to
vfio-
pci.
I can see the /dev/vfio/noiommu-0 and /dev/vfio/devices/noiommu-
vfio0.
Bind
iommufd==-1 can succeed, but failed to get hot reset info due to the
above
group check. Reason is that this happens to have some affected
devices,
and
these devices have no valid iommu_group (because they are not
bound to
vfio-
pci
hence nobody allocates noiommu group for them). So when hot reset
info
loops
such devices, it failed with -EPERM. Is this expected?

Hmm, I didn't recall that we put in such a limitation, but given the
minimally intrusive approach to no-iommu and the fact that we never
defined an invalid group ID to return to the user, it makes sense that
we just blocked the ioctl for no-iommu use.  I guess we can do the same
for no-iommu cdev.

I just realize a further issue related to this limitation. Remember that we
may finally compile out the vfio group infrastructure in the future. Say I
want to test noiommu, I may boot such a kernel with iommu disabled. I
think
the _INFO ioctl would fail as there is no iommu_group. Does it mean we
will
not support hot reset for noiommu in future if vfio group infrastructure is
compiled out?

We're talking about IOMMU groups, IOMMU groups are always present
regardless of whether we expose a vfio group interface to userspace.
Remember, we create IOMMU groups even in the no-iommu case.  Even
with
pure cdev, there are underlying IOMMU groups that maintain the DMA
ownership.

hmmm. As [1], when iommu is disabled, there will be no iommu_group for a
given device unless it is registered to VFIO, which a fake group is created.
That's why I hit the limitation [1]. When vfio_group is compiled out, then
even fake group goes away.

In the vfio group case, [1] can be hit with no-iommu only when there
are affected devices which are not bound to vfio.

yes. because vfio would allocate fake group when device is registered to
it.
Why are we not
allocating an IOMMU group to no-iommu devices when vfio group is
disabled?  Thanks,

hmmm. when the vfio group code is configured out. The
vfio_device_set_group() just returns 0 after below patch is
applied and CONFIG_VFIO_GROUP=n. So when there is no
vfio group, the fake group also goes away.

https://lore.kernel.org/kvm/20230401151833.124749-25-yi.l.liu@xxxxxxxxx/

Is this a fundamental issue or just a problem with the current
implementation proposal?  It seems like the latter.  FWIW, I also don't
see a taint happening in the cdev path for no-iommu use.  Thanks,

yes. the latter case. The reason I raised it here is to confirm the
policy on the new group/bdf capability in the DEVICE_GET_INFO. If
there is no iommu group, perhaps I only need to exclude the new
group/bdf capability from the cap chain of DEVICE_GET_INFO. is it?

I think we need to revisit the question of why allocating an IOMMU
group for a no-iommu device is exclusive to the vfio group support.

For no-iommu device, the iommu group is a fake group allocated by vfio.
is it? And the fake group allocation is part of the vfio group code.
It is the vfio_device_set_group() in group.c. If vfio group code is not
compiled in, vfio does not allocate fake groups. Detail for this compiling
can be found in link [1].

We've already been down the path of trying to report a field that only
exists for devices with certain properties with dev-id.  It doesn't
work well.  I think we've said all along that while the cdev interface
is device based, there are still going to be underlying IOMMU groups
for the user to be aware of, they're just not as much a fundamental
part of the interface.  There should not be a case where a device
doesn't have a group to report.  Thanks,

As the patch in link [1] makes vfio group optional, so if compile a kernel
with CONFIG_VFIO_GROUP=n, and boot it with iommu disabled, then there is no
group to report. Perhaps this is not a typical usage but still a sane usage
for noiommu mode as I confirmed with you in this thread. So when it comes,
needs to consider what to report for the group field.

Perhaps I messed up the discussion by referring to a patch that is part of
another series. But I think it should be considered when talking about the
group to be reported.

The question is whether the split that group.c code handles both the
vfio group AND creation of the IOMMU group in such cases is the correct
split.  I'm not arguing that the way the code is currently laid out has
the fake IOMMU group for no-iommu devices created in vfio group
specific code, but we have a common interface that makes use of IOMMU
group information for which we don't have an equivalent alternative
data field to report.

yes. It is needed to ensure _HOT_RESET_INFO workable for noiommu devices.

We've shown that dev-id doesn't work here because dev-ids only exist
for devices within the user's IOMMU context.  Also reporting an invalid
ID of any sort fails to indicate the potential implied ownership.
Therefore I recognize that if this interface is to report an IOMMU
group, then the creation of fake IOMMU groups existing only in vfio
group code would need to be refactored.  Thanks,

yeah, needs to move the iommu group creation back to vfio_main.c. This
would be a prerequisite for [1]

[1] https://lore.kernel.org/kvm/20230401151833.124749-25-yi.l.liu@xxxxxxxxx/

I'll also try out your suggestion to add a capability like below and link
it in the vfio_device_info cap chain.

#define VFIO_DEVICE_INFO_CAP_PCI_BDF          5

struct vfio_device_info_cap_pci_bdf {
        struct vfio_info_cap_header header;
        __u32   group_id;
        __u16   segment;
        __u8    bus;
        __u8    devfn; /* Use PCI_SLOT/PCI_FUNC */
};

--
Regards,
Yi Liu



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux