Re: [PATCH v3 05/12] vfio/pci: Allow passing zero-length fd array in VFIO_DEVICE_PCI_HOT_RESET

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/4/23 22:18, Alex Williamson wrote:
> On Sat,  1 Apr 2023 07:44:22 -0700
> Yi Liu <yi.l.liu@xxxxxxxxx> wrote:
>
>> as an alternative method for ownership check when iommufd is used. In
>> this case all opened devices in the affected dev_set are verified to
>> be bound to a same valid iommufd value to allow reset. It's simpler
>> and faster as user does not need to pass a set of fds and kernel no
>> need to search the device within the given fds.
>>
>> a device in noiommu mode doesn't have a valid iommufd, so this method
>> should not be used in a dev_set which contains multiple devices and one
>> of them is in noiommu. The only allowed noiommu scenario is that the
>> calling device is noiommu and it's in a singleton dev_set.
>>
>> Suggested-by: Jason Gunthorpe <jgg@xxxxxxxxxx>
>> Signed-off-by: Jason Gunthorpe <jgg@xxxxxxxxxx>
>> Reviewed-by: Jason Gunthorpe <jgg@xxxxxxxxxx>
>> Tested-by: Yanting Jiang <yanting.jiang@xxxxxxxxx>
>> Signed-off-by: Yi Liu <yi.l.liu@xxxxxxxxx>
>> ---
>>  drivers/vfio/pci/vfio_pci_core.c | 42 +++++++++++++++++++++++++++-----
>>  include/uapi/linux/vfio.h        |  9 ++++++-
>>  2 files changed, 44 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
>> index 3696b8e58445..b68fcba67a4b 100644
>> --- a/drivers/vfio/pci/vfio_pci_core.c
>> +++ b/drivers/vfio/pci/vfio_pci_core.c
>> @@ -180,7 +180,8 @@ static void vfio_pci_probe_mmaps(struct vfio_pci_core_device *vdev)
>>  struct vfio_pci_group_info;
>>  static void vfio_pci_dev_set_try_reset(struct vfio_device_set *dev_set);
>>  static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set,
>> -				      struct vfio_pci_group_info *groups);
>> +				      struct vfio_pci_group_info *groups,
>> +				      struct iommufd_ctx *iommufd_ctx);
>>  
>>  /*
>>   * INTx masking requires the ability to disable INTx signaling via PCI_COMMAND
>> @@ -1277,7 +1278,7 @@ vfio_pci_ioctl_pci_hot_reset_groups(struct vfio_pci_core_device *vdev,
>>  		return ret;
>>  
>>  	/* Somewhere between 1 and count is OK */
>> -	if (!hdr->count || hdr->count > count)
>> +	if (hdr->count > count)
>>  		return -EINVAL;
>>  
>>  	group_fds = kcalloc(hdr->count, sizeof(*group_fds), GFP_KERNEL);
>> @@ -1326,7 +1327,7 @@ vfio_pci_ioctl_pci_hot_reset_groups(struct vfio_pci_core_device *vdev,
>>  	info.count = hdr->count;
>>  	info.files = files;
>>  
>> -	ret = vfio_pci_dev_set_hot_reset(vdev->vdev.dev_set, &info);
>> +	ret = vfio_pci_dev_set_hot_reset(vdev->vdev.dev_set, &info, NULL);
>>  
>>  hot_reset_release:
>>  	for (file_idx--; file_idx >= 0; file_idx--)
>> @@ -1341,6 +1342,7 @@ static int vfio_pci_ioctl_pci_hot_reset(struct vfio_pci_core_device *vdev,
>>  {
>>  	unsigned long minsz = offsetofend(struct vfio_pci_hot_reset, count);
>>  	struct vfio_pci_hot_reset hdr;
>> +	struct iommufd_ctx *iommufd;
>>  	bool slot = false;
>>  
>>  	if (copy_from_user(&hdr, arg, minsz))
>> @@ -1355,7 +1357,12 @@ static int vfio_pci_ioctl_pci_hot_reset(struct vfio_pci_core_device *vdev,
>>  	else if (pci_probe_reset_bus(vdev->pdev->bus))
>>  		return -ENODEV;
>>  
>> -	return vfio_pci_ioctl_pci_hot_reset_groups(vdev, &hdr, slot, arg);
>> +	if (hdr.count)
>> +		return vfio_pci_ioctl_pci_hot_reset_groups(vdev, &hdr, slot, arg);
>> +
>> +	iommufd = vfio_iommufd_physical_ictx(&vdev->vdev);
>> +
>> +	return vfio_pci_dev_set_hot_reset(vdev->vdev.dev_set, NULL, iommufd);
>>  }
>>  
>>  static int vfio_pci_ioctl_ioeventfd(struct vfio_pci_core_device *vdev,
>> @@ -2327,6 +2334,9 @@ static bool vfio_dev_in_groups(struct vfio_pci_core_device *vdev,
>>  {
>>  	unsigned int i;
>>  
>> +	if (!groups)
>> +		return false;
>> +
>>  	for (i = 0; i < groups->count; i++)
>>  		if (vfio_file_has_dev(groups->files[i], &vdev->vdev))
>>  			return true;
>> @@ -2402,13 +2412,25 @@ static int vfio_pci_dev_set_pm_runtime_get(struct vfio_device_set *dev_set)
>>  	return ret;
>>  }
>>  
>> +static bool vfio_dev_in_iommufd_ctx(struct vfio_pci_core_device *vdev,
>> +				    struct iommufd_ctx *iommufd_ctx)
>> +{
>> +	struct iommufd_ctx *iommufd = vfio_iommufd_physical_ictx(&vdev->vdev);
>> +
>> +	if (!iommufd)
>> +		return false;
>> +
>> +	return iommufd == iommufd_ctx;
>> +}
>> +
>>  /*
>>   * We need to get memory_lock for each device, but devices can share mmap_lock,
>>   * therefore we need to zap and hold the vma_lock for each device, and only then
>>   * get each memory_lock.
>>   */
>>  static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set,
>> -				      struct vfio_pci_group_info *groups)
>> +				      struct vfio_pci_group_info *groups,
>> +				      struct iommufd_ctx *iommufd_ctx)
>>  {
>>  	struct vfio_pci_core_device *cur_mem;
>>  	struct vfio_pci_core_device *cur_vma;
>> @@ -2448,9 +2470,17 @@ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set,
>>  		 *
>>  		 * Otherwise all opened devices in the dev_set must be
>>  		 * contained by the set of groups provided by the user.
>> +		 *
>> +		 * If user provides a zero-length array, then all the
>> +		 * opened devices must be bound to a same iommufd_ctx.
>> +		 *
>> +		 * If all above checks are failed, reset is allowed only if
>> +		 * the calling device is in a singleton dev_set.
>>  		 */
>>  		if (cur_vma->vdev.open_count &&
>> -		    !vfio_dev_in_groups(cur_vma, groups)) {
>> +		    !vfio_dev_in_groups(cur_vma, groups) &&
>> +		    !vfio_dev_in_iommufd_ctx(cur_vma, iommufd_ctx) &&
>> +		    (dev_set->device_count > 1)) {
> This last condition looks buggy to me, we need all conditions to be
> true to generate an error here, which means that for a singleton
> dev_set, it doesn't matter what group fds are passed, if any, or whether
> the iommufd context matches.  I think in fact this means that the empty
> array path is equally available for group use cases with a singleton
> dev_set, but we don't enable it for multiple device dev_sets like we do
> iommufd.
>
> You pointed out a previous issue with hot-reset info and no-iommu where
> if other affected devices are not bound to vfio-pci the info ioctl
> returns error.  That's handled in the hot-reset ioctl by the fact that
> all affected devices must be in the dev_set and therefore bound to
> vfio-pci drivers.  So it seems to me that aside from the spurious error
> because we can't report an iommu group when none exists, and didn't
> spot it to invent an invalid group for debugging, hot-reset otherwise
> works with no-iommu just like it does for iommu backed devices.  We
> don't currently require singleton no-iommu dev_sets afaict.
>
> I'll also note that if the dev_set is singleton, this suggests that
> pci_reset_function() can make use of bus reset, so a hot-reset is
> accessible via VFIO_DEVICE_RESET if the appropriate reset method is
> selected.
>
> Therefore, I think as written, the singleton dev_set hot-reset is
> enabled for iommufd and (unintentionally?) for the group path, while
> also negating a requirement for a group fd or that a provided group fd
> actually matches the device in this latter case.  The null-array
> approach is not however extended to groups for more general use.
> Additionally, limiting no-iommu hot-reset to singleton dev_sets
> provides only a marginal functional difference vs VFIO_DEVICE_RESET.
> Thanks,
>
> Alex
What bout introducing a helper
static bool is_reset_ok(pdev, groups, ctx) {
    if (!pdev->vdev.open_count)
        return true;
    if (groups && vfio_dev_in_groups(pdev, groups))
        return true;
    if (ctx && vfio_dev_in_iommufd_ctx(pdev, ctx)
        return true;
    return false;
}

Assuming the above logic is correct I think this would make the code
more readable

Thanks

Eric
>>  			ret = -EINVAL;
>>  			goto err_undo;
>>  		}
>> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
>> index f96e5689cffc..17aa5d09db41 100644
>> --- a/include/uapi/linux/vfio.h
>> +++ b/include/uapi/linux/vfio.h
>> @@ -679,7 +679,14 @@ struct vfio_pci_hot_reset_info {
>>   * the calling user must ensure all affected devices, if opened, are
>>   * owned by itself.
>>   *
>> - * The ownership is proved by an array of group fds.
>> + * The ownership can be proved by:
>> + *   - An array of group fds
>> + *   - A zero-length array
>> + *
>> + * In the last case all affected devices which are opened by this user
>> + * must have been bound to a same iommufd. If the calling device is in
>> + * noiommu mode (no valid iommufd) then it can be reset only if the reset
>> + * doesn't affect other devices.
>>   *
>>   * Return: 0 on success, -errno on failure.
>>   */




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux