From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Define more of the PSR mask bits. Even if we don't set them
from the driver they can be very useful during PSR debugging.
Having to trawl through bspec every time to find them is
not fun.
The particularly interesting bits are:
- PIPE_MISC[21]/PIPE_MISC_PSR_MASK_PIPE_REG_WRITE
Normally most, if not all, pipe/plane registers (even the
noarm ones) trigger a PSR exit. This stops that, leaving
only PLANE_SURF (or so it seems) to do the triggering
- CHICKEN_TRANS[30]/NO_VBLANK_MASK_IN_DEEP_PSR
Stops PSR exit from generating an extra vblank before the
first frame is transmitted.
Looks like with DC states enabled the extra vblank happens
after link traning, with DC states disabled it seems to happen
immediately. No idea as of now why there is a difference.
Unfortunately CHICKEN_TRANS itself seems to be double buffered
and thus won't latch until the first vblank. So with DC states
enabled the register effctively uses the reset value during DC5
exit+PSR exit sequence, and thus the bit does nothing until
latched by the vblank that it was trying to prevent from being
generated in the first place. So we should probably call this one
a chicken/egg bit instead.
TODO: should confirm what this does when using PSR standby
mode instead of deep/link-off mode...
Cc: Manasi Navare <navaremanasi@xxxxxxxxxx>
Cc: Drew Davenport <ddavenport@xxxxxxxxxxxx>
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Cc: Jouni Högander <jouni.hogander@xxxxxxxxx>
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d22ffd7a32dc..383c532320f9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2205,6 +2205,7 @@
#define EDP_PSR_DEBUG_MASK_LPSP (1 << 27)
#define EDP_PSR_DEBUG_MASK_MEMUP (1 << 26)
#define EDP_PSR_DEBUG_MASK_HPD (1 << 25)
+#define EDP_PSR_DEBUG_MASK_FBC_MODIFY (1 << 24)
#define EDP_PSR_DEBUG_MASK_DISP_REG_WRITE (1 << 16) /* Reserved in ICL+ */
#define EDP_PSR_DEBUG_EXIT_ON_PIXEL_UNDERRUN (1 << 15) /* SKL+ */
@@ -3500,8 +3501,13 @@
#define PIPE_MISC_YUV420_ENABLE REG_BIT(27) /* glk+ */
#define PIPE_MISC_YUV420_MODE_FULL_BLEND REG_BIT(26) /* glk+ */
#define PIPE_MISC_HDR_MODE_PRECISION REG_BIT(23) /* icl+ */
+#define PIPE_MISC_PSR_MASK_PRIMARY_FLIP REG_BIT(23) /* bdw only */
+#define PIPE_MISC_PSR_MASK_SPRITE_ENABLE REG_BIT(22) /* bdw only */
+#define PIPE_MISC_PSR_MASK_PIPE_REG_WRITE REG_BIT(21) /* skl+ */
+#define PIPE_MISC_PSR_MASK_CURSOR_MOVE REG_BIT(21) /* bdw only */
+#define PIPE_MISC_PSR_MASK_VBLANK_VSYNC_INT REG_BIT(20)
#define PIPE_MISC_OUTPUT_COLORSPACE_YUV REG_BIT(11)
-#define PIPE_MISC_PIXEL_ROUNDING_TRUNC REG_BIT(8) /* tgl+ */
+#define PIPE_MISC_PIXEL_ROUNDING_TRUNC REG_BIT(8) /* tgl+ */
/*
* For Display < 13, Bits 5-7 of PIPE MISC represent DITHER BPC with
* valid values of: 6, 8, 10 BPC.
@@ -5550,7 +5556,7 @@
#define MTL_CHICKEN_TRANS(trans) _MMIO_TRANS((trans), \
_MTL_CHICKEN_TRANS_A, \
_MTL_CHICKEN_TRANS_B)
-
+#define NO_VBLANK_MASK_IN_DEEP_PSR REG_BIT(30) /* skl+ */
#define HSW_FRAME_START_DELAY_MASK REG_GENMASK(28, 27)
#define HSW_FRAME_START_DELAY(x) REG_FIELD_PREP(HSW_FRAME_START_DELAY_MASK, x)
#define VSC_DATA_SEL_SOFTWARE_CONTROL REG_BIT(25) /* GLK */
--
2.39.2
