Re: [PATCH v6 21/24] vfio: Add VFIO_DEVICE_BIND_IOMMUFD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> Sent: Friday, March 10, 2023 5:58 PM
> 
> > From: Tian, Kevin <kevin.tian@xxxxxxxxx>
> > Sent: Friday, March 10, 2023 5:02 PM
> >
> > > From: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> > > Sent: Wednesday, March 8, 2023 9:29 PM
> > > +
> > > +static int vfio_device_cdev_probe_noiommu(struct vfio_device *device)
> > > +{
> > > +	struct iommu_group *iommu_group;
> > > +	int ret = 0;
> > > +
> > > +	if (!IS_ENABLED(CONFIG_VFIO_NOIOMMU) || !vfio_noiommu)
> > > +		return -EINVAL;
> > > +
> > > +	if (!capable(CAP_SYS_RAWIO))
> > > +		return -EPERM;
> > > +
> > > +	iommu_group = iommu_group_get(device->dev);
> > > +	if (!iommu_group)
> > > +		return 0;
> > > +
> > > +	/*
> > > +	 * We cannot support noiommu mode for devices that are
> > protected
> > > +	 * by IOMMU.  So check the iommu_group, if it is a no-iommu group
> > > +	 * created by VFIO, we support. If not, we refuse.
> > > +	 */
> > > +	if
> > (!vfio_group_find_noiommu_group_from_iommu(iommu_group))
> > > +		ret = -EINVAL;
> > > +	iommu_group_put(iommu_group);
> > > +	return ret;
> >
> > can check whether group->name == "vfio-noiommu"?
> 
> But VFIO names it to be "vfio-noiommu" for both VFIO_EMULATED_IOMMU
> and VFIO_NO_IOMMU. And we don't support no-iommu mode for emulated
> devices since VFIO_MAP/UNMAP, pin_page(), dam_rw() won't work in the
> no-iommu mode.

correct.

> 
> So maybe something like below in drivers/vfio/vfio.h. It can be used
> to replace the code from iommu_group_get() to
> vfio_group_find_noiommu_group_from_iommu() In my patch.
> 
> #if IS_ENABLED(CONFIG_VFIO_GROUP)
> static inline bool vfio_device_group_allow_noiommu(struct vfio_device
> *device)
> {
> 	lockdep_assert_held(&device->dev_set->lock);
> 
> 	return device->group->type == VFIO_NO_IOMMU;
> }
> #else
> static inline bool vfio_device_group_allow_noiommu(struct vfio_device
> *device)
> {
> 	struct iommu_group *iommu_group;
> 
> 	lockdep_assert_held(&device->dev_set->lock);
> 
> 	iommu_group = iommu_group_get(device->dev);
> 	if (iommu_group)
> 		iommu_group_put(iommu_group);
> 
> 	return !iommu_group;
> }
> #endif

this makes sense.




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux