Hi Mika,
> -----Original Message-----
> From: Kahola, Mika <mika.kahola@xxxxxxxxx>
> Sent: Thursday, February 23, 2023 5:40 AM
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Sripada, Radhakrishna <radhakrishna.sripada@xxxxxxxxx>; Deak, Imre
> <imre.deak@xxxxxxxxx>; Shankar, Uma <uma.shankar@xxxxxxxxx>; Taylor,
> Clinton A <clinton.a.taylor@xxxxxxxxx>; Kahola, Mika <mika.kahola@xxxxxxxxx>
> Subject: [PATCH v3 06/22] drm/i915/mtl: Add vswing programming for C10 phys
>
> From: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
>
> C10 phys uses direct mapping internally for voltage and pre-emphasis levels.
> Program the levels directly to the fields in the VDR Registers.
>
> Bspec: 65449
>
> v2: From table "C10: Tx EQ settings for DP 1.4x" it shows level 1
> and preemphasis 1 instead of two times of level 1 preemphasis 0.
> Fix this in the driver code as well.
> v3: VSwing update (Clint)
>
> Cc: Imre Deak <imre.deak@xxxxxxxxx>
> Cc: Uma Shankar <uma.shankar@xxxxxxxxx>
> Signed-off-by: Clint Taylor <Clinton.A.Taylor@xxxxxxxxx>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
> Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_cx0_phy.c | 140 ++++++++++++++++--
> drivers/gpu/drm/i915/display/intel_cx0_phy.h | 2 +
> .../gpu/drm/i915/display/intel_cx0_phy_regs.h | 14 ++
> drivers/gpu/drm/i915/display/intel_ddi.c | 4 +-
> .../drm/i915/display/intel_ddi_buf_trans.c | 36 ++++-
> .../drm/i915/display/intel_ddi_buf_trans.h | 6 +
> .../i915/display/intel_display_power_map.c | 1 +
> 7 files changed, 192 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> index c73d2bc3e1a8..3d61afbe7bdb 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> @@ -6,11 +6,15 @@
> #include "i915_reg.h"
> #include "intel_cx0_phy.h"
> #include "intel_cx0_phy_regs.h"
> +#include "intel_ddi.h"
> +#include "intel_ddi_buf_trans.h"
> #include "intel_de.h"
> #include "intel_display_types.h"
> #include "intel_dp.h"
> #include "intel_panel.h"
> #include "intel_tc.h"
> +#include "intel_psr.h"
> +#include "intel_uncore.h"
>
> bool intel_is_c10phy(struct drm_i915_private *dev_priv, enum phy phy)
> {
> @@ -20,6 +24,15 @@ bool intel_is_c10phy(struct drm_i915_private *dev_priv,
> enum phy phy)
> return false;
> }
>
> +static void
> +assert_dc_off(struct drm_i915_private *i915)
> +{
> + bool enabled;
> +
> + enabled = intel_display_power_is_enabled(i915,
> POWER_DOMAIN_DC_OFF);
> + drm_WARN_ON(&i915->drm, !enabled);
> +}
> +
> static void intel_cx0_bus_reset(struct drm_i915_private *i915, enum port port,
> int lane)
> {
> enum phy phy = intel_port_to_phy(i915, port);
> @@ -112,6 +125,8 @@ static u8 intel_cx0_read(struct drm_i915_private *i915,
> enum port port,
> int i, status = 0;
> u32 val;
>
> + assert_dc_off(i915);
> +
> for (i = 0; i < 3; i++) {
> status = __intel_cx0_read(i915, port, lane, addr, &val);
>
> @@ -194,6 +209,8 @@ static void __intel_cx0_write(struct drm_i915_private
> *i915, enum port port,
> enum phy phy = intel_port_to_phy(i915, port);
> int i, status;
>
> + assert_dc_off(i915);
> +
> for (i = 0; i < 3; i++) {
> status = __intel_cx0_write_once(i915, port, lane, addr, data,
> committed);
>
> @@ -241,6 +258,89 @@ static void intel_cx0_rmw(struct drm_i915_private
> *i915, enum port port,
> }
> }
>
> +/*
> + * Prepare HW for CX0 phy transactions.
> + *
> + * It is required that PSR and DC5/6 are disabled before any CX0 message
> + * bus transaction is executed.
> + */
> +static intel_wakeref_t intel_cx0_phy_transaction_begin(struct intel_encoder
> *encoder)
> +{
> + struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> +
> + intel_psr_pause(intel_dp);
> + return intel_display_power_get(i915, POWER_DOMAIN_DC_OFF);
> +}
> +
> +static void intel_cx0_phy_transaction_end(struct intel_encoder *encoder,
> intel_wakeref_t wakeref)
> +{
> + struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> +
> + intel_psr_resume(intel_dp);
> + intel_display_power_put(i915, POWER_DOMAIN_DC_OFF, wakeref);
> +}
> +
> +void intel_cx0_phy_set_signal_levels(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state)
> +{
> + struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> + struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
> + bool lane_reversal = dig_port->saved_port_bits &
> DDI_BUF_PORT_REVERSAL;
> + u8 master_lane = lane_reversal ? INTEL_CX0_LANE1 :
> + INTEL_CX0_LANE0;
> + u8 follower_lane = lane_reversal ? INTEL_CX0_LANE0 :
> + INTEL_CX0_LANE1;
> + const struct intel_ddi_buf_trans *trans;
> + intel_wakeref_t wakeref;
> + int n_entries, ln;
> +
> + wakeref = intel_cx0_phy_transaction_begin(encoder);
> +
> + trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries);
> + if (drm_WARN_ON_ONCE(&i915->drm, !trans))
> + return;
> +
> + intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES,
> PHY_C10_VDR_CONTROL(1),
> + 0, C10_VDR_CTRL_MSGBUS_ACCESS,
> MB_WRITE_COMMITTED);
> +
> + for (ln = 0; ln < 4; ln++) {
> + int level = intel_ddi_level(encoder, crtc_state, ln);
> + int lane, tx;
> +
> + lane = ln / 2 + 1;
> + tx = ln % 2 + 1;
> +
> + intel_cx0_rmw(i915, encoder->port, lane,
> PHY_CX0_VDR_OVRD_CONTROL(lane, tx, 0),
> + C10_PHY_OVRD_LEVEL_MASK,
> + C10_PHY_OVRD_LEVEL(trans-
> >entries[level].snps.pre_cursor),
> + MB_WRITE_COMMITTED);
> + intel_cx0_rmw(i915, encoder->port, lane,
> PHY_CX0_VDR_OVRD_CONTROL(lane, tx, 1),
> + C10_PHY_OVRD_LEVEL_MASK,
> + C10_PHY_OVRD_LEVEL(trans-
> >entries[level].snps.vswing),
> + MB_WRITE_COMMITTED);
> + intel_cx0_rmw(i915, encoder->port, lane,
> PHY_CX0_VDR_OVRD_CONTROL(lane, tx, 2),
> + C10_PHY_OVRD_LEVEL_MASK,
> + C10_PHY_OVRD_LEVEL(trans-
> >entries[level].snps.post_cursor),
> + MB_WRITE_COMMITTED);
> + }
> +
> + /* Write Override enables in 0xD71 */
> + intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES,
> PHY_C10_VDR_OVRD,
> + PHY_C10_VDR_OVRD_TX1 | PHY_C10_VDR_OVRD_TX2,
> + PHY_C10_VDR_OVRD_TX1 | PHY_C10_VDR_OVRD_TX2,
> + MB_WRITE_COMMITTED);
> + intel_cx0_write(i915, encoder->port, follower_lane,
> PHY_C10_VDR_CONTROL(1),
> + C10_VDR_CTRL_MSGBUS_ACCESS |
> C10_VDR_CTRL_UPDATE_CFG,
> + MB_WRITE_COMMITTED);
> + intel_cx0_write(i915, encoder->port, master_lane,
> PHY_C10_VDR_CONTROL(1),
> + C10_VDR_CTRL_MASTER_LANE |
> C10_VDR_CTRL_MSGBUS_ACCESS |
> + C10_VDR_CTRL_UPDATE_CFG,
> MB_WRITE_COMMITTED);
> +
> + intel_cx0_phy_transaction_end(encoder, wakeref);
> +}
> +
> /*
> * Basic DP link rates with 38.4 MHz reference clock.
> * Note: The tables below are with SSC. In non-ssc
> @@ -1085,9 +1185,12 @@ void intel_c10mpllb_readout_hw_state(struct
> intel_encoder *encoder,
> u8 lane = lane_reversal ? INTEL_CX0_LANE1 :
> INTEL_CX0_LANE0;
> enum phy phy = intel_port_to_phy(i915, encoder->port);
> + intel_wakeref_t wakeref;
> int i;
> u8 cmn, tx0;
>
> + wakeref = intel_cx0_phy_transaction_begin(encoder);
> +
> /*
> * According to C10 VDR Register programming Sequence we need
> * to do this to read PHY internal registers from MsgBus.
> @@ -1106,6 +1209,8 @@ void intel_c10mpllb_readout_hw_state(struct
> intel_encoder *encoder,
> cmn != C10_CMN0_HDMI_VAL))
> drm_dbg_kms(&i915->drm, "Unexpected tx: %x or cmn: %x for
> phy: %c.\n",
> tx0, cmn, phy_name(phy));
> +
> + intel_cx0_phy_transaction_end(encoder, wakeref);
> }
>
> static void intel_c10_pll_program(struct drm_i915_private *i915,
> @@ -1243,8 +1348,11 @@ static void intel_program_port_clock_ctl(struct
> intel_encoder *encoder,
>
> if (intel_crtc_has_dp_encoder(crtc_state)) {
> intel_dp = enc_to_intel_dp(encoder);
> - ssc_enabled = intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
> - DP_MAX_DOWNSPREAD_0_5;
> + ssc_enabled = (intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
> + DP_MAX_DOWNSPREAD_0_5);
> +
> + if (intel_dp_is_edp(intel_dp) && !intel_panel_use_ssc(i915))
> + ssc_enabled = false;
>
> if (!intel_panel_use_ssc(i915))
> ssc_enabled = false;
> @@ -1252,11 +1360,11 @@ static void intel_program_port_clock_ctl(struct
> intel_encoder *encoder,
> /* TODO: DP2.0 10G and 20G rates enable MPLLA*/
> val |= ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0;
> }
> +
> intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
> - XELPDP_LANE1_PHY_CLOCK_SELECT |
> - XELPDP_FORWARD_CLOCK_UNGATE |
> + XELPDP_LANE1_PHY_CLOCK_SELECT |
> XELPDP_FORWARD_CLOCK_UNGATE |
> XELPDP_DDI_CLOCK_SELECT_MASK |
> - XELPDP_SSC_ENABLE_PLLB, val);
> + XELPDP_SSC_ENABLE_PLLA | XELPDP_SSC_ENABLE_PLLB,
> val);
> }
>
> static u32 intel_cx0_get_powerdown_update(u8 lane)
> @@ -1396,9 +1504,12 @@ static void intel_cx0_program_phy_lane(struct
> drm_i915_private *i915,
> bool dp_alt_mode =
> intel_tc_port_in_dp_alt_mode(enc_to_dig_port(encoder));
> enum port port = encoder->port;
>
> - intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES,
> PHY_C10_VDR_CONTROL(1),
> - C10_VDR_CTRL_MSGBUS_ACCESS,
> C10_VDR_CTRL_MSGBUS_ACCESS,
> - MB_WRITE_COMMITTED);
> + intel_cx0_rmw(i915, port, INTEL_CX0_LANE1,
> PHY_C10_VDR_CONTROL(1),
> + C10_VDR_CTRL_MSGBUS_ACCESS |
> C10_VDR_CTRL_UPDATE_CFG,
> + C10_VDR_CTRL_MSGBUS_ACCESS,
> MB_WRITE_COMMITTED);
> + intel_cx0_rmw(i915, port, INTEL_CX0_LANE0,
> PHY_C10_VDR_CONTROL(1),
> + C10_VDR_CTRL_MSGBUS_ACCESS |
> C10_VDR_CTRL_UPDATE_CFG,
> + C10_VDR_CTRL_MASTER_LANE |
> C10_VDR_CTRL_MSGBUS_ACCESS, MB_WRITE_COMMITTED);
>
> l0t1 = intel_cx0_read(i915, port, INTEL_CX0_LANE0,
> PHY_CX0_TX_CONTROL(1, 2));
> l0t2 = intel_cx0_read(i915, port, INTEL_CX0_LANE0,
> PHY_CX0_TX_CONTROL(2, 2));
> @@ -1561,9 +1672,14 @@ void intel_cx0pll_enable(struct intel_encoder
> *encoder,
> {
> struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> enum phy phy = intel_port_to_phy(i915, encoder->port);
> + intel_wakeref_t wakeref;
> +
> + wakeref = intel_cx0_phy_transaction_begin(encoder);
>
> drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
> intel_c10pll_enable(encoder, crtc_state);
> +
> + intel_cx0_phy_transaction_end(encoder, wakeref);
> }
>
> static void intel_c10pll_disable(struct intel_encoder *encoder)
> @@ -1608,7 +1724,8 @@ static void intel_c10pll_disable(struct intel_encoder
> *encoder)
>
> /* 7. Program PORT_CLOCK_CTL register to disable and gate clocks. */
> intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
> - XELPDP_DDI_CLOCK_SELECT_MASK |
> + XELPDP_DDI_CLOCK_SELECT_MASK, 0);
> + intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
> XELPDP_FORWARD_CLOCK_UNGATE, 0);
> }
>
> @@ -1616,9 +1733,14 @@ void intel_cx0pll_disable(struct intel_encoder
> *encoder)
> {
> struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> enum phy phy = intel_port_to_phy(i915, encoder->port);
> + intel_wakeref_t wakeref;
> +
> + wakeref = intel_cx0_phy_transaction_begin(encoder);
>
> drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
> intel_c10pll_disable(encoder);
> +
> + intel_cx0_phy_transaction_end(encoder, wakeref);
> }
>
> void intel_c10mpllb_state_verify(struct intel_atomic_state *state,
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> index f8023f240727..952c7deeffaa 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> @@ -40,5 +40,7 @@ int intel_c10mpllb_calc_port_clock(struct intel_encoder
> *encoder,
> void intel_c10mpllb_state_verify(struct intel_atomic_state *state,
> struct intel_crtc_state *new_crtc_state);
> int intel_c10_phy_check_hdmi_link_rate(int clock);
> +void intel_cx0_phy_set_signal_levels(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state);
>
> #endif /* __INTEL_CX0_PHY_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> index f6002b70ddbe..9bf7408fb363 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> @@ -162,6 +162,14 @@
> #define CX0_P4PG_STATE_DISABLE 0xC
> #define CX0_P2_STATE_RESET 0x2
>
> +#define PHY_C10_VDR_OVRD 0xD71
> +#define PHY_C10_VDR_OVRD_TX1 REG_BIT8(0)
> +#define PHY_C10_VDR_OVRD_TX2 REG_BIT8(2)
> +#define PHY_C10_VDR_PRE_OVRD_TX1 0xD80
> +#define C10_PHY_OVRD_LEVEL_MASK REG_GENMASK8(5, 0)
> +#define C10_PHY_OVRD_LEVEL(val)
> REG_FIELD_PREP8(C10_PHY_OVRD_LEVEL_MASK, val)
> +#define PHY_CX0_VDR_OVRD_CONTROL(lane, tx, control)
> (PHY_C10_VDR_PRE_OVRD_TX1 + ((lane) ^ ((tx) - 1)) * 0x10 + (control))
> +
> /* PHY_C10_VDR_PLL0 */
> #define PLL_C10_MPLL_SSC_EN REG_BIT8(0)
>
> @@ -169,4 +177,10 @@
> #define PHY_CX0_TX_CONTROL(tx, control) (0x400 + ((tx) - 1) * 0x200 +
> (control))
> #define CONTROL2_DISABLE_SINGLE_TX REG_BIT(6)
>
> +/* C10 Phy VSWING Masks */
> +#define C10_PHY_VSWING_LEVEL_MASK REG_GENMASK8(2, 0)
> +#define C10_PHY_VSWING_LEVEL(val)
> REG_FIELD_PREP8(C10_PHY_VSWING_LEVEL_MASK, val)
> +#define C10_PHY_VSWING_PREEMPH_MASK REG_GENMASK8(1, 0)
> +#define C10_PHY_VSWING_PREEMPH(val)
> REG_FIELD_PREP8(C10_PHY_VSWING_PREEMPH_MASK, val)
> +
> #endif /* __INTEL_CX0_PHY_REGS_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> b/drivers/gpu/drm/i915/display/intel_ddi.c
> index d48e1ffdfc71..60c38bc77683 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4457,7 +4457,9 @@ void intel_ddi_init(struct drm_i915_private *dev_priv,
> enum port port)
> encoder->get_config = hsw_ddi_get_config;
> }
>
> - if (IS_DG2(dev_priv)) {
> + if (DISPLAY_VER(dev_priv) >= 14) {
> + encoder->set_signal_levels = intel_cx0_phy_set_signal_levels;
> + } else if (IS_DG2(dev_priv)) {
> encoder->set_signal_levels = intel_snps_phy_set_signal_levels;
> } else if (DISPLAY_VER(dev_priv) >= 12) {
> if (intel_phy_is_combo(dev_priv, phy))
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> index 006a2e979000..d5a9aa2de2fa 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> @@ -1035,6 +1035,30 @@ static const struct intel_ddi_buf_trans
> dg2_snps_trans_uhbr = {
> .num_entries = ARRAY_SIZE(_dg2_snps_trans_uhbr),
> };
>
> +/*
> + * Some platforms don't need a mapping table and only expect us to
> + * to program the vswing + preemphasis levels directly since the
> + * hardware will do its own mapping to tuning values internally.
> + */
> +static const union intel_ddi_buf_trans_entry _mtl_c10_trans_dp14[] = {
> + { .snps = { 26, 0, 0 } }, /* preset 0 */
> + { .snps = { 33, 0, 6 } }, /* preset 1 */
> + { .snps = { 38, 0, 11 } }, /* preset 2 */
> + { .snps = { 43, 0, 19 } }, /* preset 3 */
> + { .snps = { 39, 0, 0 } }, /* preset 4 */
> + { .snps = { 45, 0, 7 } }, /* preset 5 */
> + { .snps = { 46, 0, 13 } }, /* preset 6 */
> + { .snps = { 46, 0, 0 } }, /* preset 7 */
> + { .snps = { 55, 0, 7 } }, /* preset 8 */
> + { .snps = { 62, 0, 0 } }, /* preset 9 */
> +};
> +
> +static const struct intel_ddi_buf_trans mtl_cx0_trans = {
> + .entries = _mtl_c10_trans_dp14,
> + .num_entries = ARRAY_SIZE(_mtl_c10_trans_dp14),
> + .hdmi_default_entry = ARRAY_SIZE(_mtl_c10_trans_dp14) - 1,
> +};
> +
> bool is_hobl_buf_trans(const struct intel_ddi_buf_trans *table)
> {
> return table == &tgl_combo_phy_trans_edp_hbr2_hobl;
> @@ -1606,12 +1630,22 @@ dg2_get_snps_buf_trans(struct intel_encoder
> *encoder,
> return intel_get_buf_trans(&dg2_snps_trans, n_entries);
> }
>
> +static const struct intel_ddi_buf_trans *
> +mtl_get_cx0_buf_trans(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state,
> + int *n_entries)
> +{
> + return intel_get_buf_trans(&mtl_cx0_trans, n_entries);
> +}
> +
> void intel_ddi_buf_trans_init(struct intel_encoder *encoder)
> {
> struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> enum phy phy = intel_port_to_phy(i915, encoder->port);
>
> - if (IS_DG2(i915)) {
> + if (DISPLAY_VER(i915) >= 14) {
> + encoder->get_buf_trans = mtl_get_cx0_buf_trans;
> + } else if (IS_DG2(i915)) {
> encoder->get_buf_trans = dg2_get_snps_buf_trans;
> } else if (IS_ALDERLAKE_P(i915)) {
> if (intel_phy_is_combo(i915, phy))
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
> b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
> index 2133984a572b..e4a857b9829d 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
> +++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
> @@ -51,6 +51,11 @@ struct dg2_snps_phy_buf_trans {
> u8 post_cursor;
> };
>
> +struct direct_phy_buf_trans {
> + u8 level;
> + u8 preemph;
> +};
> +
> union intel_ddi_buf_trans_entry {
> struct hsw_ddi_buf_trans hsw;
> struct bxt_ddi_buf_trans bxt;
> @@ -58,6 +63,7 @@ union intel_ddi_buf_trans_entry {
> struct icl_mg_phy_ddi_buf_trans mg;
> struct tgl_dkl_phy_ddi_buf_trans dkl;
> struct dg2_snps_phy_buf_trans snps;
> + struct direct_phy_buf_trans direct;
> };
>
> struct intel_ddi_buf_trans {
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power_map.c
> b/drivers/gpu/drm/i915/display/intel_display_power_map.c
> index 6645eb1911d8..5ec2b9a109ae 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power_map.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power_map.c
> @@ -1427,6 +1427,7 @@ I915_DECL_PW_DOMAINS(xelpdp_pwdoms_dc_off,
> XELPDP_PW_2_POWER_DOMAINS,
> POWER_DOMAIN_AUDIO_MMIO,
> POWER_DOMAIN_MODESET,
> + POWER_DOMAIN_DC_OFF,
Is this ^ redundant here?
-Radhakrishna(RK) Sripada
> POWER_DOMAIN_AUX_A,
> POWER_DOMAIN_AUX_B,
> POWER_DOMAIN_DC_OFF,
> --
> 2.34.1
