On Tue, Feb 21, 2023 at 11:30:38AM -0800, Matt Roper wrote: > The bspec was updated with a minor change to the 'DCC mode select' > setting to be programmed during combo PHY initialization. > > Bspec: 49291 > Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx> > --- > drivers/gpu/drm/i915/display/intel_combo_phy.c | 9 +++------ > drivers/gpu/drm/i915/display/intel_combo_phy_regs.h | 4 ++-- > 2 files changed, 5 insertions(+), 8 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c b/drivers/gpu/drm/i915/display/intel_combo_phy.c > index 27e98eabb006..0608ae95b6f5 100644 > --- a/drivers/gpu/drm/i915/display/intel_combo_phy.c > +++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c > @@ -233,8 +233,7 @@ static bool icl_combo_phy_verify_state(struct drm_i915_private *dev_priv, > ICL_PORT_TX_DW8_ODCC_CLK_DIV_SEL_DIV2); > > ret &= check_phy_reg(dev_priv, phy, ICL_PORT_PCS_DW1_LN(0, phy), > - DCC_MODE_SELECT_MASK, > - DCC_MODE_SELECT_CONTINUOSLY); > + DCC_MODE_SELECT_MASK, RUN_DCC_ONCE); > } > > ret &= icl_verify_procmon_ref_values(dev_priv, phy); > @@ -352,10 +351,8 @@ static void icl_combo_phys_init(struct drm_i915_private *dev_priv) > val |= ICL_PORT_TX_DW8_ODCC_CLK_DIV_SEL_DIV2; > intel_de_write(dev_priv, ICL_PORT_TX_DW8_GRP(phy), val); > > - val = intel_de_read(dev_priv, ICL_PORT_PCS_DW1_LN(0, phy)); > - val &= ~DCC_MODE_SELECT_MASK; > - val |= DCC_MODE_SELECT_CONTINUOSLY; > - intel_de_write(dev_priv, ICL_PORT_PCS_DW1_GRP(phy), val); > + intel_de_rmw(dev_priv, ICL_PORT_PCS_DW1_LN(0, phy), > + DCC_MODE_SELECT_MASK, RUN_DCC_ONCE); Actually, converting to intel_de_rmw won't work here since we need to make sure the write goes to the _GRP register instead of the _LN0 register...I'll send an updated version. Matt > } > > icl_set_procmon_ref_values(dev_priv, phy); > diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy_regs.h b/drivers/gpu/drm/i915/display/intel_combo_phy_regs.h > index 2ed65193ca19..b0983edccf3f 100644 > --- a/drivers/gpu/drm/i915/display/intel_combo_phy_regs.h > +++ b/drivers/gpu/drm/i915/display/intel_combo_phy_regs.h > @@ -90,8 +90,8 @@ > #define ICL_PORT_PCS_DW1_AUX(phy) _MMIO(_ICL_PORT_PCS_DW_AUX(1, phy)) > #define ICL_PORT_PCS_DW1_GRP(phy) _MMIO(_ICL_PORT_PCS_DW_GRP(1, phy)) > #define ICL_PORT_PCS_DW1_LN(ln, phy) _MMIO(_ICL_PORT_PCS_DW_LN(1, ln, phy)) > -#define DCC_MODE_SELECT_MASK (0x3 << 20) > -#define DCC_MODE_SELECT_CONTINUOSLY (0x3 << 20) > +#define DCC_MODE_SELECT_MASK REG_GENMASK(21, 20) > +#define RUN_DCC_ONCE REG_FIELD_PREP(DCC_MODE_SELECT_MASK, 0) > #define COMMON_KEEPER_EN (1 << 26) > #define LATENCY_OPTIM_MASK (0x3 << 2) > #define LATENCY_OPTIM_VAL(x) ((x) << 2) > -- > 2.39.1 > -- Matt Roper Graphics Software Engineer Linux GPU Platform Enablement Intel Corporation
