On Mon, Feb 20, 2023 at 06:14:58PM +0200, Ville Syrjälä wrote:
> On Mon, Feb 20, 2023 at 05:45:45PM +0200, Lisovskiy, Stanislav wrote:
> > On Tue, Feb 14, 2023 at 04:04:05PM +0200, Ville Syrjälä wrote:
> > > On Tue, Feb 14, 2023 at 12:01:32PM +0200, Stanislav Lisovskiy wrote:
> > > > From: Jigar Bhatt <jigar.bhatt@xxxxxxxxx>
> > > >
> > > > Display to communicate "display configuration" to Pcode for more accurate
> > > > power accounting for DG2. Existing sequence is only sending the voltage
> > > > value to the Pcode. Adding new sequence with current cdclk associate
> > > > with voltage value masking. Adding pcode request when any power well
> > > > will disable or enable.
> > > >
> > > > v2: - Fixed identation(Stanislav Lisovskiy)
> > > > - Made conditions more specific(in the commit we declare that
> > > > we do this for DG2 only, however that commit changes >= to
> > > > == for many other platforms.(Stanislav Lisovskiy)
> > > >
> > > > v3: - Refactored code for proper identation and smaller conditions
> > > > (Andi Shyti)
> > > > - Switched to proper function naming, removed platform specific
> > > > code from intel_atomic_commit_tail(Jani Nikula)
> > > > - Moved intel_cdclk_power_usage_to_pcode_pre/post_notification
> > > > to proper places, before and after setting CDCLK(Stanislav Lisovskiy)
> > > >
> > > > Signed-off-by: Jigar Bhatt <jigar.bhatt@xxxxxxxxx>
> > > > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> > > > ---
> > > > drivers/gpu/drm/i915/display/intel_cdclk.c | 97 ++++++++++++++++++++--
> > > > drivers/gpu/drm/i915/display/intel_cdclk.h | 2 +
> > > > drivers/gpu/drm/i915/i915_reg.h | 4 +
> > > > 3 files changed, 94 insertions(+), 9 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> > > > index 82da76b586ed..4f8bcc0b51e8 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> > > > @@ -1908,10 +1908,10 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> > > > * NOOP - No Pcode communication needed for
> > > > * Display versions 14 and beyond
> > > > */;
> > > > - else if (DISPLAY_VER(dev_priv) >= 11)
> > > > + else if (DISPLAY_VER(dev_priv) >= 11 && !IS_DG2(dev_priv))
> > > > ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
> > > > cdclk_config->voltage_level);
> > > > - else
> > > > + if (DISPLAY_VER(dev_priv) < 11) {
> > > > /*
> > > > * The timeout isn't specified, the 2ms used here is based on
> > > > * experiment.
> > > > @@ -1922,7 +1922,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> > > > HSW_PCODE_DE_WRITE_FREQ_REQ,
> > > > cdclk_config->voltage_level,
> > > > 150, 2);
> > > > -
> > > > + }
> > > > if (ret) {
> > > > drm_err(&dev_priv->drm,
> > > > "PCode CDCLK freq set failed, (err %d, freq %d)\n",
> > > > @@ -2218,6 +2218,29 @@ void intel_cdclk_dump_config(struct drm_i915_private *i915,
> > > > cdclk_config->voltage_level);
> > > > }
> > > >
> > > > +static void intel_pcode_notify(struct drm_i915_private *i915,
> > > > + unsigned int cdclk, u8 voltage_level,
> > > > + u8 active_pipes)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + if (DISPLAY_VER(i915) < 12)
> > > > + return;
> > > > +
> > > > + ret = skl_pcode_request(&i915->uncore, SKL_PCODE_CDCLK_CONTROL,
> > > > + SKL_CDCLK_PREPARE_FOR_CHANGE |
> > >
> > > Isn't that something we're supposed to set only *before*
> > > the change? Here it looks like we're setting also for the
> > > post call.
> >
> > According to BSpec, we are supposed to send notifications both
> > before and after setting CDCLK:
> >
> > 1) Before the change we need to set voltage bits to the max(bits 1:0 set to 3)
>
> You are doing that for both pre and post now.
>
> > 2) If CDCLK is increasing set to increased value or leave the same
> > 3) If enabling pipe write upcoming pipe count
> >
> > After the change
> >
> > 1) we set required voltage level
> > 2) write CDCLK bits if CDCLK is disabled
> > 3) If pipe is disabled write the current pipe count
> >
> > I agree, current code in fact doesn't do it exactly as described.
> >
> > >
> > > > + DISPLAY_TO_PCODE_MASK
> > > > + (cdclk, active_pipes, voltage_level),
> > > > + SKL_CDCLK_READY_FOR_CHANGE,
> > > > + SKL_CDCLK_READY_FOR_CHANGE, 3);
> > > > + if (ret) {
> > > > + drm_err(&i915->drm,
> > > > + "Failed to inform PCU about display config (err %d)\n",
> > > > + ret);
> > > > + return;
> > > > + }
> > > > +}
> > > > +
> > > > /**
> > > > * intel_set_cdclk - Push the CDCLK configuration to the hardware
> > > > * @dev_priv: i915 device
> > > > @@ -2287,6 +2310,56 @@ static void intel_set_cdclk(struct drm_i915_private *dev_priv,
> > > > }
> > > > }
> > > >
> > > > +/**
> > > > + * intel_cdclk_power_usage_to_pcode_pre_notification: display to pcode notification
> > > > + * before the enabling power wells.
> > > > + * send notification with cdclk, number of pipes, voltage_level.
> > > > + * @state: intel atomic state
> > > > + */
> > > > +void intel_cdclk_power_usage_to_pcode_pre_notification(struct intel_atomic_state *state)
> > > > +{
> > > > + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > > > + const struct intel_cdclk_state *old_cdclk_state =
> > > > + intel_atomic_get_old_cdclk_state(state);
> > > > + const struct intel_cdclk_state *new_cdclk_state =
> > > > + intel_atomic_get_new_cdclk_state(state);
> > > > + if (!intel_cdclk_changed(&old_cdclk_state->actual,
> > > > + &new_cdclk_state->actual) &&
> > > > + (new_cdclk_state->active_pipes ==
> > > > + old_cdclk_state->active_pipes))
> > > > + return;
> > > > + else if (old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk)
> > > > + intel_pcode_notify(dev_priv, new_cdclk_state->actual.cdclk,
> > > > + new_cdclk_state->actual.voltage_level,
> > > > + new_cdclk_state->active_pipes);
> > > > + else if (old_cdclk_state->actual.cdclk >= new_cdclk_state->actual.cdclk)
> > > > + intel_pcode_notify(dev_priv, old_cdclk_state->actual.cdclk,
> > > > + old_cdclk_state->actual.voltage_level,
> > > > + old_cdclk_state->active_pipes);
> > > > + else if (old_cdclk_state->active_pipes != new_cdclk_state->active_pipes)
> > > > + intel_pcode_notify(dev_priv, new_cdclk_state->actual.cdclk,
> > > > + new_cdclk_state->actual.voltage_level,
> > > > + new_cdclk_state->active_pipes);
> > > > +
> > > > + intel_pcode_notify(dev_priv, DISPLAY_TO_PCODE_CDCLK_MAX,
> > > > + new_cdclk_state->actual.voltage_level,
> > > > + new_cdclk_state->active_pipes);
> > >
> > > I don't understand what is going on here. Are we trying to
> > > say something like
> > >
> > > intel_pcode_notify(...,
> > > max(old_cdclk, new_cdclk),
> > > max(old_voltage_level, new_voltage_level),
> > > old_active_pipes | new_active_pipes);
> >
> > Regarding CDCLK yes, for voltage level, just read out from BSpec
> > that we are supposed to set voltage level to to max(3) always before
> > the change. Dunno why this was implemented that way initially(BSpec got updated?)
>
> Pretty sure it's always been like that for all platforms. Dunno why.
>
> >
> >
> > > ?
> > >
> > > Also the inclusion of the pipes here would imply that
> > > we need to think about serialize vs. lock.
> >
> > Should we already had locked/serialized global state in intel_modeset_calc_cdclk,
> > if active_pipes/cdclk had changed?
>
> For active_pipes in particular, locked yes, serialized no since no other
> platform needs us to poke the hardware state on active_pipes changes.
> The lock is what protects the software state, serialize is what
> guarantees the hardware state updates happen in the correct order.
Okay, then I need to extend serializing also active_pipes change in
intel_modeset_calc_cdclk.
As a side note, wonder if we could make some kind of automated way to determine when we
need to serialize or lock global state, i.e smth like
cdclk_state_is_serialize_needed(new_cdclk_state, old_cdclk_state)
or cdclk_state_is_global_lock_needed. Have similar helpers to compare bw_state and other
states also.
So that we don't have to hardcode all this logic, also will make this look more intuitively
understandable.
>
> >
> > Stan
> >
> > >
> > > > +}
> > > > +
> > > > +/* intel_cdclk_power_usage_to_pcode_post_notification: after frequency change sending
> > > > + * voltage_level, active pipes, current CDCLK frequency.
> > > > + * @state: intel atomic state
> > > > + */
> > > > +void intel_cdclk_power_usage_to_pcode_post_notification(struct intel_atomic_state *state)
> > > > +{
> > > > + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > > > + const struct intel_cdclk_state *new_cdclk_state =
> > > > + intel_atomic_get_new_cdclk_state(state);
> > > > + intel_pcode_notify(dev_priv, new_cdclk_state->actual.cdclk,
> > > > + new_cdclk_state->actual.voltage_level,
> > > > + new_cdclk_state->active_pipes);
> > > > +}
> > > > +
> > > > /**
> > > > * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware
> > > > * @state: intel atomic state
> > > > @@ -2297,7 +2370,7 @@ static void intel_set_cdclk(struct drm_i915_private *dev_priv,
> > > > void
> > > > intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
> > > > {
> > > > - struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > > > + struct drm_i915_private *i915 = to_i915(state->base.dev);
> > > > const struct intel_cdclk_state *old_cdclk_state =
> > > > intel_atomic_get_old_cdclk_state(state);
> > > > const struct intel_cdclk_state *new_cdclk_state =
> > > > @@ -2308,11 +2381,14 @@ intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
> > > > &new_cdclk_state->actual))
> > > > return;
> > > >
> > > > + if (DISPLAY_VER(i915) >= 12)
> > > > + intel_cdclk_power_usage_to_pcode_pre_notification(state);
> > > > +
> > > > if (pipe == INVALID_PIPE ||
> > > > old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
> > > > - drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
> > > > + drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
> > > >
> > > > - intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
> > > > + intel_set_cdclk(i915, &new_cdclk_state->actual, pipe);
> > > > }
> > > > }
> > > >
> > > > @@ -2326,7 +2402,7 @@ intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
> > > > void
> > > > intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
> > > > {
> > > > - struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > > > + struct drm_i915_private *i915 = to_i915(state->base.dev);
> > > > const struct intel_cdclk_state *old_cdclk_state =
> > > > intel_atomic_get_old_cdclk_state(state);
> > > > const struct intel_cdclk_state *new_cdclk_state =
> > > > @@ -2337,11 +2413,14 @@ intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
> > > > &new_cdclk_state->actual))
> > > > return;
> > > >
> > > > + if (DISPLAY_VER(i915) >= 12)
> > > > + intel_cdclk_power_usage_to_pcode_post_notification(state);
> > > > +
> > > > if (pipe != INVALID_PIPE &&
> > > > old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) {
> > > > - drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
> > > > + drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
> > > >
> > > > - intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
> > > > + intel_set_cdclk(i915, &new_cdclk_state->actual, pipe);
> > > > }
> > > > }
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.h b/drivers/gpu/drm/i915/display/intel_cdclk.h
> > > > index 51e2f6a11ce4..fa356adc61d9 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_cdclk.h
> > > > +++ b/drivers/gpu/drm/i915/display/intel_cdclk.h
> > > > @@ -64,6 +64,8 @@ bool intel_cdclk_needs_modeset(const struct intel_cdclk_config *a,
> > > > const struct intel_cdclk_config *b);
> > > > void intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state);
> > > > void intel_set_cdclk_post_plane_update(struct intel_atomic_state *state);
> > > > +void intel_cdclk_power_usage_to_pcode_pre_notification(struct intel_atomic_state *state);
> > > > +void intel_cdclk_power_usage_to_pcode_post_notification(struct intel_atomic_state *state);
> > > > void intel_cdclk_dump_config(struct drm_i915_private *i915,
> > > > const struct intel_cdclk_config *cdclk_config,
> > > > const char *context);
> > > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > > > index 596efc940ee7..b90c31862083 100644
> > > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > > @@ -6498,6 +6498,10 @@
> > > > #define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8)
> > > > #define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point) (((point) << 16) | (0x1 << 8))
> > > > #define ADL_PCODE_MEM_SS_READ_PSF_GV_INFO ((0) | (0x2 << 8))
> > > > +#define DISPLAY_TO_PCODE_CDCLK_MAX 0x28D
> > > > +#define DISPLAY_TO_PCODE_MASK(cdclk, num_pipes, voltage_level) \
> > > > + ((1 << 31) | (num_pipes << 28) | \
> > > > + (cdclk << 16) | (1 << 27) | voltage_level)
> > > > #define ICL_PCODE_SAGV_DE_MEM_SS_CONFIG 0xe
> > > > #define ICL_PCODE_REP_QGV_MASK REG_GENMASK(1, 0)
> > > > #define ICL_PCODE_REP_QGV_SAFE REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 0)
> > > > --
> > > > 2.37.3
> > >
> > > --
> > > Ville Syrjälä
> > > Intel
>
> --
> Ville Syrjälä
> Intel
