From: Jigar Bhatt <jigar.bhatt@xxxxxxxxx>
Display to communicate "display configuration" to Pcode for more accurate
power accounting for DG2. Existing sequence is only sending the voltage
value to the Pcode. Adding new sequence with current cdclk associate
with voltage value masking. Adding pcode request when any power well
will disable or enable.
v2: - Fixed identation(Stanislav Lisovskiy)
- Made conditions more specific(in the commit we declare that
we do this for DG2 only, however that commit changes >= to
== for many other platforms.(Stanislav Lisovskiy)
Signed-off-by: Jigar Bhatt <jigar.bhatt@xxxxxxxxx>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_cdclk.c | 89 +++++++++++++++++++-
drivers/gpu/drm/i915/display/intel_cdclk.h | 2 +
drivers/gpu/drm/i915/display/intel_display.c | 6 ++
drivers/gpu/drm/i915/i915_reg.h | 4 +
4 files changed, 98 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 82da76b586ed..22ba0303ea28 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -1908,10 +1908,10 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
* NOOP - No Pcode communication needed for
* Display versions 14 and beyond
*/;
- else if (DISPLAY_VER(dev_priv) >= 11)
+ else if (DISPLAY_VER(dev_priv) >= 11 && !IS_DG2(dev_priv))
ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
cdclk_config->voltage_level);
- else
+ if (DISPLAY_VER(dev_priv) < 11) {
/*
* The timeout isn't specified, the 2ms used here is based on
* experiment.
@@ -1922,7 +1922,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
HSW_PCODE_DE_WRITE_FREQ_REQ,
cdclk_config->voltage_level,
150, 2);
-
+ }
if (ret) {
drm_err(&dev_priv->drm,
"PCode CDCLK freq set failed, (err %d, freq %d)\n",
@@ -2218,6 +2218,34 @@ void intel_cdclk_dump_config(struct drm_i915_private *i915,
cdclk_config->voltage_level);
}
+/**
+ * intel_display_to_pcode- inform pcode for display config
+ * @cdclk: current cdclk as per new or old state
+ * @voltage_level: current voltage_level send to Pcode
+ * @active_pipes: active pipes for more accurate power accounting
+ */
+static void intel_display_to_pcode(struct drm_i915_private *dev_priv,
+ unsigned int cdclk, u8 voltage_level,
+ u8 active_pipes)
+{
+ int ret;
+
+ if (DISPLAY_VER(dev_priv) >= 12) {
+ ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
+ SKL_CDCLK_PREPARE_FOR_CHANGE |
+ DISPLAY_TO_PCODE_MASK
+ (cdclk, active_pipes, voltage_level),
+ SKL_CDCLK_READY_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE, 3);
+ if (ret) {
+ drm_err(&dev_priv->drm,
+ "Failed to inform PCU about display config (err %d)\n",
+ ret);
+ return;
+ }
+ }
+}
+
/**
* intel_set_cdclk - Push the CDCLK configuration to the hardware
* @dev_priv: i915 device
@@ -2287,6 +2315,61 @@ static void intel_set_cdclk(struct drm_i915_private *dev_priv,
}
}
+/**
+ * intel_display_to_pcode_pre_notification: display to pcode notification
+ * before the enabling power wells.
+ * send notification with cdclk, number of pipes, voltage_level.
+ * @state: intel atomic state
+ */
+void intel_display_to_pcode_pre_notification(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+ const struct intel_cdclk_state *old_cdclk_state =
+ intel_atomic_get_old_cdclk_state(state);
+ const struct intel_cdclk_state *new_cdclk_state =
+ intel_atomic_get_new_cdclk_state(state);
+ if (!intel_cdclk_changed(&old_cdclk_state->actual,
+ &new_cdclk_state->actual) &&
+ (new_cdclk_state->active_pipes ==
+ old_cdclk_state->active_pipes))
+ return;
+ if (old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
+ intel_display_to_pcode(dev_priv, new_cdclk_state->actual.cdclk,
+ new_cdclk_state->actual.voltage_level,
+ new_cdclk_state->active_pipes);
+ return;
+ }
+ if (old_cdclk_state->actual.cdclk >= new_cdclk_state->actual.cdclk) {
+ intel_display_to_pcode(dev_priv, old_cdclk_state->actual.cdclk,
+ old_cdclk_state->actual.voltage_level,
+ old_cdclk_state->active_pipes);
+ return;
+ }
+ if (old_cdclk_state->active_pipes != new_cdclk_state->active_pipes) {
+ intel_display_to_pcode(dev_priv, new_cdclk_state->actual.cdclk,
+ new_cdclk_state->actual.voltage_level,
+ new_cdclk_state->active_pipes);
+ return;
+ }
+ intel_display_to_pcode(dev_priv, DISPLAY_TO_PCODE_CDCLK_MAX,
+ new_cdclk_state->actual.voltage_level,
+ new_cdclk_state->active_pipes);
+}
+
+/*intel_display_to_pcode_post_notification: after frequency change sending
+ * voltage_level, active pipes, current CDCLK frequency.
+ * @state: intel atomic state
+ */
+void intel_display_to_pcode_post_notification(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+ const struct intel_cdclk_state *new_cdclk_state =
+ intel_atomic_get_new_cdclk_state(state);
+ intel_display_to_pcode(dev_priv, new_cdclk_state->actual.cdclk,
+ new_cdclk_state->actual.voltage_level,
+ new_cdclk_state->active_pipes);
+}
+
/**
* intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware
* @state: intel atomic state
diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.h b/drivers/gpu/drm/i915/display/intel_cdclk.h
index 51e2f6a11ce4..95d9d39d63be 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.h
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.h
@@ -64,6 +64,8 @@ bool intel_cdclk_needs_modeset(const struct intel_cdclk_config *a,
const struct intel_cdclk_config *b);
void intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state);
void intel_set_cdclk_post_plane_update(struct intel_atomic_state *state);
+void intel_display_to_pcode_pre_notification(struct intel_atomic_state *state);
+void intel_display_to_pcode_post_notification(struct intel_atomic_state *state);
void intel_cdclk_dump_config(struct drm_i915_private *i915,
const struct intel_cdclk_config *cdclk_config,
const char *context);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 166662ade593..af0f0840e4b8 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -7462,6 +7462,9 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
intel_atomic_prepare_plane_clear_colors(state);
+ if (IS_DG2(dev_priv))
+ intel_display_to_pcode_pre_notification(state);
+
for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
new_crtc_state, i) {
if (intel_crtc_needs_modeset(new_crtc_state) ||
@@ -7483,6 +7486,9 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
intel_modeset_verify_disabled(dev_priv, state);
}
+ if (IS_DG2(dev_priv))
+ intel_display_to_pcode_post_notification(state);
+
intel_sagv_pre_plane_update(state);
/* Complete the events for pipes that have now been disabled */
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 596efc940ee7..b90c31862083 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6498,6 +6498,10 @@
#define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8)
#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point) (((point) << 16) | (0x1 << 8))
#define ADL_PCODE_MEM_SS_READ_PSF_GV_INFO ((0) | (0x2 << 8))
+#define DISPLAY_TO_PCODE_CDCLK_MAX 0x28D
+#define DISPLAY_TO_PCODE_MASK(cdclk, num_pipes, voltage_level) \
+ ((1 << 31) | (num_pipes << 28) | \
+ (cdclk << 16) | (1 << 27) | voltage_level)
#define ICL_PCODE_SAGV_DE_MEM_SS_CONFIG 0xe
#define ICL_PCODE_REP_QGV_MASK REG_GENMASK(1, 0)
#define ICL_PCODE_REP_QGV_SAFE REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 0)
--
2.37.3
