Enable SDP error detection configuration, this will set CRC16 in 128b/132b link layer. For Display version 13 a hardware bit31 in register VIDEO_DIP_CTL is added to enable/disable SDP CRC applicable for DP2.0 only, but the default value of this bit will enable CRC16 in 128b/132b hence skipping this write. Corrective actions on SDP corruption is yet to be defined. v2: Moved the CRC enable to link training init(Jani N) v3: Moved crc enable to ddi pre enable <Jani N> Signed-off-by: Arun R Murthy <arun.r.murthy@xxxxxxxxx> --- .../gpu/drm/i915/display/intel_dp_link_training.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c index 3d3efcf02011..7064e465423b 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c @@ -1453,4 +1453,16 @@ void intel_dp_start_link_train(struct intel_dp *intel_dp, if (!passed) intel_dp_schedule_fallback_link_training(intel_dp, crtc_state); + + /* DP v2.0 SCR on SDP CRC16 for 128b/132b Link Layer */ + if (intel_dp_is_uhbr(crtc_state) && passed) + drm_dp_dpcd_writeb(&intel_dp->aux, + DP_SDP_ERROR_DETECTION_CONFIGURATION, + DP_SDP_CRC16_128B132B_EN); + /* + * VIDEO_DIP_CTL register bit 31 should be set to '0' to not + * disable SDP CRC. This is applicable for Display version 13. + * Default value of bit 31 is '0' hence discarding the write + */ + /* TODO: Corrective actions on SDP corruption yet to be defined */ } -- 2.25.1
