[PATCH 2/2] drm/i915: Move common mmio base out of private macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Instead of using the common DISPLAY_MMIO_BASE(dev_priv) in all single
macros, only use them in the macros that are to be used outside the
header. This reduces the use of the implicit dev_priv, making it easier
to remove it later.

Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_reg.h | 73 ++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 943db8ec63f8..1cde3bcb9c88 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1182,9 +1182,9 @@
 #define PM_VEBOX_CS_ERROR_INTERRUPT		(1 << 12) /* hsw+ */
 #define PM_VEBOX_USER_INTERRUPT			(1 << 10) /* hsw+ */
 
-#define GT_PARITY_ERROR(dev_priv) \
+#define GT_PARITY_ERROR(__i915) \
 	(GT_RENDER_L3_PARITY_ERROR_INTERRUPT | \
-	 (IS_HASWELL(dev_priv) ? GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1 : 0))
+	 (IS_HASWELL(__i915) ? GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1 : 0))
 
 /* These are all the "old" interrupts */
 #define ILK_BSD_USER_INTERRUPT				(1 << 5)
@@ -1403,10 +1403,11 @@
 /*
  * Clock control & power management
  */
-#define _DPLL_A (DISPLAY_MMIO_BASE(dev_priv) + 0x6014)
-#define _DPLL_B (DISPLAY_MMIO_BASE(dev_priv) + 0x6018)
-#define _CHV_DPLL_C (DISPLAY_MMIO_BASE(dev_priv) + 0x6030)
-#define DPLL(pipe) _MMIO_PIPE3((pipe), _DPLL_A, _DPLL_B, _CHV_DPLL_C)
+#define _DPLL_A		0x6014
+#define _DPLL_B		0x6018
+#define _CHV_DPLL_C	0x6030
+#define DPLL(pipe) _MMIO(DISPLAY_MMIO_BASE(dev_priv) + \
+			 _PIPE3((pipe), _DPLL_A, _DPLL_B, _CHV_DPLL_C))
 
 #define VGA0	_MMIO(0x6000)
 #define VGA1	_MMIO(0x6004)
@@ -1502,10 +1503,11 @@
 #define   SDVO_MULTIPLIER_SHIFT_HIRES		4
 #define   SDVO_MULTIPLIER_SHIFT_VGA		0
 
-#define _DPLL_A_MD (DISPLAY_MMIO_BASE(dev_priv) + 0x601c)
-#define _DPLL_B_MD (DISPLAY_MMIO_BASE(dev_priv) + 0x6020)
-#define _CHV_DPLL_C_MD (DISPLAY_MMIO_BASE(dev_priv) + 0x603c)
-#define DPLL_MD(pipe) _MMIO_PIPE3((pipe), _DPLL_A_MD, _DPLL_B_MD, _CHV_DPLL_C_MD)
+#define _DPLL_A_MD				0x601c
+#define _DPLL_B_MD				0x6020
+#define _CHV_DPLL_C_MD				0x603c
+#define DPLL_MD(pipe) _MMIO(DISPLAY_MMIO_BASE(dev_priv) + \
+			    _PIPE3((pipe), _DPLL_A_MD, _DPLL_B_MD, _CHV_DPLL_C_MD))
 
 /*
  * UDI pixel divider, controlling how many pixels are stuffed into a packet.
@@ -3323,42 +3325,45 @@
  * is 20 bytes in each direction, hence the 5 fixed
  * data registers
  */
-#define _DPA_AUX_CH_CTL		(DISPLAY_MMIO_BASE(dev_priv) + 0x64010)
-#define _DPA_AUX_CH_DATA1	(DISPLAY_MMIO_BASE(dev_priv) + 0x64014)
-
-#define _DPB_AUX_CH_CTL		(DISPLAY_MMIO_BASE(dev_priv) + 0x64110)
-#define _DPB_AUX_CH_DATA1	(DISPLAY_MMIO_BASE(dev_priv) + 0x64114)
-
-#define DP_AUX_CH_CTL(aux_ch)	_MMIO_PORT(aux_ch, _DPA_AUX_CH_CTL, _DPB_AUX_CH_CTL)
-#define DP_AUX_CH_DATA(aux_ch, i)	_MMIO(_PORT(aux_ch, _DPA_AUX_CH_DATA1, _DPB_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
+#define _DPA_AUX_CH_CTL		0x64010
+#define _DPA_AUX_CH_DATA1	0x64014
+#define _DPB_AUX_CH_CTL		0x64110
+#define _DPB_AUX_CH_DATA1	0x64114
+#define DP_AUX_CH_CTL(aux_ch)	_MMIO(DISPLAY_MMIO_BASE(dev_priv) + \
+				      _PORT(aux_ch, _DPA_AUX_CH_CTL, _DPB_AUX_CH_CTL))
+#define DP_AUX_CH_DATA(aux_ch, i)		\
+	_MMIO(DISPLAY_MMIO_BASE(dev_priv) +	\
+	      _PORT(aux_ch, _DPA_AUX_CH_DATA1, _DPB_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
 
 #define _XELPDP_USBC1_AUX_CH_CTL	0x16F210
 #define _XELPDP_USBC2_AUX_CH_CTL	0x16F410
 #define _XELPDP_USBC3_AUX_CH_CTL	0x16F610
 #define _XELPDP_USBC4_AUX_CH_CTL	0x16F810
 
-#define XELPDP_DP_AUX_CH_CTL(aux_ch)		_MMIO(_PICK(aux_ch, \
-						       _DPA_AUX_CH_CTL, \
-						       _DPB_AUX_CH_CTL, \
-						       0, /* port/aux_ch C is non-existent */ \
-						       _XELPDP_USBC1_AUX_CH_CTL, \
-						       _XELPDP_USBC2_AUX_CH_CTL, \
-						       _XELPDP_USBC3_AUX_CH_CTL, \
-						       _XELPDP_USBC4_AUX_CH_CTL))
+#define XELPDP_DP_AUX_CH_CTL(aux_ch)		_MMIO(DISPLAY_MMIO_BASE(dev_priv) + \
+						      _PICK(aux_ch, \
+							    _DPA_AUX_CH_CTL, \
+							    _DPB_AUX_CH_CTL, \
+							    0, /* port/aux_ch C is non-existent */ \
+							    _XELPDP_USBC1_AUX_CH_CTL, \
+							    _XELPDP_USBC2_AUX_CH_CTL, \
+							    _XELPDP_USBC3_AUX_CH_CTL, \
+							    _XELPDP_USBC4_AUX_CH_CTL))
 
 #define _XELPDP_USBC1_AUX_CH_DATA1      0x16F214
 #define _XELPDP_USBC2_AUX_CH_DATA1      0x16F414
 #define _XELPDP_USBC3_AUX_CH_DATA1      0x16F614
 #define _XELPDP_USBC4_AUX_CH_DATA1      0x16F814
 
-#define XELPDP_DP_AUX_CH_DATA(aux_ch, i)	_MMIO(_PICK(aux_ch, \
-						       _DPA_AUX_CH_DATA1, \
-						       _DPB_AUX_CH_DATA1, \
-						       0, /* port/aux_ch C is non-existent */ \
-						       _XELPDP_USBC1_AUX_CH_DATA1, \
-						       _XELPDP_USBC2_AUX_CH_DATA1, \
-						       _XELPDP_USBC3_AUX_CH_DATA1, \
-						       _XELPDP_USBC4_AUX_CH_DATA1) + (i) * 4)
+#define XELPDP_DP_AUX_CH_DATA(aux_ch, i)	_MMIO(DISPLAY_MMIO_BASE(dev_priv) + \
+						      _PICK(aux_ch, \
+							    _DPA_AUX_CH_DATA1, \
+							    _DPB_AUX_CH_DATA1, \
+							    0, /* port/aux_ch C is non-existent */ \
+							    _XELPDP_USBC1_AUX_CH_DATA1, \
+							    _XELPDP_USBC2_AUX_CH_DATA1, \
+							    _XELPDP_USBC3_AUX_CH_DATA1, \
+							    _XELPDP_USBC4_AUX_CH_DATA1) + (i) * 4)
 
 #define   DP_AUX_CH_CTL_SEND_BUSY	    (1 << 31)
 #define   DP_AUX_CH_CTL_DONE		    (1 << 30)
-- 
2.39.0




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux