On Tue, Aug 13, 2013 at 8:01 PM, Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> wrote: > On Tue, Aug 13, 2013 at 07:53:25PM +0200, Sedat Dilek wrote: >> Files attached. > > Can you also please attach a full dmesg so I can check for anything > unusual? > -2: BAD with your test-patch -3: GOOD with your patch - Sedat .-
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-rc5-next20130813-2-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Tue Aug 13 19:38:16 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE [ 0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE [ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x02050000, 0x02050fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37962000-0x37ca8fff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87424 r8192 d23168 u262144 [ 0.000000] pcpu-alloc: s87424 r8192 d23168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938460K/4086000K available (7136K kernel code, 1047K rwdata, 3140K rodata, 1332K init, 1984K bss, 147540K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.378 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.75 BogoMIPS (lpj=6385512) [ 0.000081] pid_max: default: 32768 minimum: 301 [ 0.000245] Security Framework initialized [ 0.000302] AppArmor: AppArmor initialized [ 0.000339] Yama: becoming mindful. [ 0.000752] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001865] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002368] Mount-cache hash table entries: 256 [ 0.002932] Initializing cgroup subsys memory [ 0.003028] Initializing cgroup subsys devices [ 0.003067] Initializing cgroup subsys freezer [ 0.003107] Initializing cgroup subsys blkio [ 0.003144] Initializing cgroup subsys perf_event [ 0.003184] Initializing cgroup subsys hugetlb [ 0.003272] Disabled fast string operations [ 0.003309] CPU: Physical Processor ID: 0 [ 0.003345] CPU: Processor Core ID: 0 [ 0.003385] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003385] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003450] mce: CPU supports 7 MCE banks [ 0.003501] CPU0: Thermal monitoring enabled (TM1) [ 0.003547] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003547] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003547] tlb_flushall_shift: 5 [ 0.003721] Freeing SMP alternatives memory: 24K (ffffffff81e54000 - ffffffff81e5a000) [ 0.004800] ACPI: Core revision 20130725 [ 0.015565] ACPI: All ACPI Tables successfully acquired [ 0.029498] ftrace: allocating 27134 entries in 106 pages [ 0.044300] Enabling x2apic [ 0.044338] Enabled x2apic [ 0.044401] Switched APIC routing to physical x2apic. [ 0.045365] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085061] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.085176] TSC deadline timer enabled [ 0.085189] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.085338] ... version: 3 [ 0.085374] ... bit width: 48 [ 0.085410] ... generic registers: 4 [ 0.085446] ... value mask: 0000ffffffffffff [ 0.085485] ... max period: 0000ffffffffffff [ 0.085523] ... fixed-purpose events: 3 [ 0.085559] ... event mask: 000000070000000f [ 0.098551] Disabled fast string operations [ 0.101734] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.113319] Disabled fast string operations [ 0.126929] Disabled fast string operations [ 0.087574] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.129052] Brought up 4 CPUs [ 0.129154] smpboot: Total of 4 processors activated (12771.02 BogoMIPS) [ 0.133213] devtmpfs: initialized [ 0.135238] EVM: security.selinux [ 0.135274] EVM: security.SMACK64 [ 0.135309] EVM: security.capability [ 0.135429] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.136997] regulator-dummy: no parameters [ 0.137184] NET: Registered protocol family 16 [ 0.137525] cpuidle: using governor ladder [ 0.137562] cpuidle: using governor menu [ 0.137637] ACPI: bus type PCI registered [ 0.137785] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.137845] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.144817] PCI: Using configuration type 1 for base access [ 0.148169] bio: create slab <bio-0> at 0 [ 0.148625] ACPI: Added _OSI(Module Device) [ 0.148663] ACPI: Added _OSI(Processor Device) [ 0.148700] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.148738] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150603] ACPI: EC: Look up EC in DSDT [ 0.176862] ACPI: Executed 1 blocks of module-level executable AML code [ 0.182829] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.194834] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.195436] ACPI: Dynamic OEM Table Load: [ 0.195507] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.205296] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.205976] ACPI: Dynamic OEM Table Load: [ 0.206046] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.217453] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.218029] ACPI: Dynamic OEM Table Load: [ 0.218099] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.231083] ACPI: Interpreter enabled [ 0.231134] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.231243] ACPI: (supports S0 S1 S3 S4 S5) [ 0.231280] ACPI: Using IOAPIC for interrupt routing [ 0.231371] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.231661] ACPI: No dock devices found. [ 0.255676] ACPI: Power Resource [FN00] (off) [ 0.255897] ACPI: Power Resource [FN01] (off) [ 0.256114] ACPI: Power Resource [FN02] (off) [ 0.256328] ACPI: Power Resource [FN03] (off) [ 0.256547] ACPI: Power Resource [FN04] (off) [ 0.257733] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.258108] \_SB_.PCI0:_OSC invalid UUID [ 0.258110] _OSC request data:1 8 0 [ 0.259016] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.259128] PCI host bridge to bus 0000:00 [ 0.259167] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.259207] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.259248] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.259289] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.259331] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.259372] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.259429] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.259581] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.259594] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.259602] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.259607] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.259789] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.259816] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit] [ 0.259902] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.260060] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.260083] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff] [ 0.260185] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.260329] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.260349] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.260428] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.260511] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.260616] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.260708] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.260797] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.260904] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.260994] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.261083] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.261186] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.261281] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.261433] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.261458] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff] [ 0.261559] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.261703] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.261947] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.261969] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.261979] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.261989] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.261998] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.262007] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.262018] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff] [ 0.262070] pci 0000:00:1f.2: PME# supported from D3hot [ 0.262203] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.262223] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.262248] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.262611] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.262808] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.263543] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.263713] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.269402] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.269447] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.269623] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.269693] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.269816] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.269892] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.270230] pci 0000:02:00.0: supports D1 D2 [ 0.270231] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.270353] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.277337] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.277398] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.277408] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.277533] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.277570] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.277769] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.285308] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.285381] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.285565] \_SB_.PCI0:_OSC invalid UUID [ 0.285567] _OSC request data:1 1f 0 [ 0.285572] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.285628] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.286517] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.286866] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.287258] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.287603] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.287948] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.288321] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.288713] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.289061] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.289950] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.290028] ACPI: \_SB_.PCI0: notify handler is installed [ 0.290092] Found 1 acpi root devices [ 0.290161] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.290446] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.290504] vgaarb: loaded [ 0.290538] vgaarb: bridge control possible 0000:00:02.0 [ 0.291249] SCSI subsystem initialized [ 0.291286] ACPI: bus type ATA registered [ 0.291436] libata version 3.00 loaded. [ 0.291498] ACPI: bus type USB registered [ 0.291580] usbcore: registered new interface driver usbfs [ 0.291640] usbcore: registered new interface driver hub [ 0.291733] usbcore: registered new device driver usb [ 0.292121] PCI: Using ACPI for IRQ routing [ 0.293832] PCI: pci_cache_line_size set to 64 bytes [ 0.293941] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.293944] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.293946] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.293948] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.294193] NetLabel: Initializing [ 0.294229] NetLabel: domain hash size = 128 [ 0.294266] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.294350] NetLabel: unlabeled traffic allowed by default [ 0.294477] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.294668] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.296730] Switched to clocksource hpet [ 0.314370] AppArmor: AppArmor Filesystem Enabled [ 0.314459] pnp: PnP ACPI init [ 0.314509] ACPI: bus type PNP registered [ 0.314958] pnp 00:00: [dma 4] [ 0.315001] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.315045] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.315212] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.315269] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.315347] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.315390] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.315430] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.315471] system 00:04: [io 0xffff] has been reserved [ 0.315511] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.315552] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.315592] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.315633] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.315673] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.315714] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.315756] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315804] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.315899] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.315941] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.316002] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.316083] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.316393] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.316436] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.316478] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.316520] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.316562] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.316604] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.316646] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.316688] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.316741] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.316784] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.316828] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317528] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.317569] pnp: PnP ACPI: found 11 devices [ 0.317606] ACPI: bus type PNP unregistered [ 0.325660] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.325705] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.325756] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.325796] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.325844] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.325905] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.325947] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.326418] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.326421] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.326423] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.326425] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.326427] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.326429] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.326431] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.326433] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.326436] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.326570] NET: Registered protocol family 2 [ 0.326980] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.327218] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.327535] TCP: Hash tables configured (established 32768 bind 32768) [ 0.327835] TCP: reno registered [ 0.327888] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.327993] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.328287] NET: Registered protocol family 1 [ 0.328343] pci 0000:00:02.0: Boot video device [ 0.329134] PCI: CLS 64 bytes, default 64 [ 0.329345] Trying to unpack rootfs image as initramfs... [ 0.405788] Freeing initrd memory: 3356K (ffff880037962000 - ffff880037ca9000) [ 0.405849] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.405891] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.406316] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406363] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406415] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406465] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406589] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 0.407147] Scanning for low memory corruption every 60 seconds [ 0.407780] Initialise module verification [ 0.407888] audit: initializing netlink socket (disabled) [ 0.407945] type=2000 audit(1376426198.396:1): initialized [ 0.438168] bounce pool size: 64 pages [ 0.438231] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.438952] VFS: Disk quotas dquot_6.5.2 [ 0.439031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.439904] fuse init (API version 7.22) [ 0.440049] msgmni has been set to 7698 [ 0.440788] Key type asymmetric registered [ 0.440826] Asymmetric key parser 'x509' registered [ 0.440913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.441029] io scheduler noop registered [ 0.441066] io scheduler deadline registered (default) [ 0.441141] io scheduler cfq registered [ 0.441554] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.441634] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.441820] intel_idle: MWAIT substates: 0x21120 [ 0.441822] intel_idle: v0.4 model 0x2A [ 0.441823] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.442580] ACPI: AC Adapter [ADP1] (on-line) [ 0.442904] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.443175] ACPI: Lid Switch [LID0] [ 0.443284] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.443343] ACPI: Power Button [PWRB] [ 0.443444] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.443500] ACPI: Power Button [PWRF] [ 0.443635] ACPI: Fan [FAN0] (off) [ 0.443723] ACPI: Fan [FAN1] (off) [ 0.443806] ACPI: Fan [FAN2] (off) [ 0.443891] ACPI: Fan [FAN3] (off) [ 0.443978] ACPI: Fan [FAN4] (off) [ 0.444097] ACPI: Requesting acpi_cpufreq [ 0.447558] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.447600] ACPI: Thermal Zone [TZ00] (62 C) [ 0.448059] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.448100] ACPI: Thermal Zone [TZ01] (30 C) [ 0.448187] GHES: HEST is not enabled! [ 0.448442] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.452195] Linux agpgart interface v0.103 [ 0.455092] brd: module loaded [ 0.455247] ACPI: Battery Slot [BAT1] (battery present) [ 0.456573] loop: module loaded [ 0.456863] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.456912] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.459934] ahci 0000:00:1f.2: version 3.0 [ 0.460089] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.460289] ahci: SSS flag set, parallel bus scan disabled [ 0.472650] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.472714] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.472773] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.497608] scsi0 : ahci [ 0.497924] scsi1 : ahci [ 0.498171] scsi2 : ahci [ 0.498409] scsi3 : ahci [ 0.498626] scsi4 : ahci [ 0.498819] scsi5 : ahci [ 0.498937] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.498990] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.499042] ata3: DUMMY [ 0.499075] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.499129] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.499180] ata6: DUMMY [ 0.500145] libphy: Fixed MDIO Bus: probed [ 0.500462] tun: Universal TUN/TAP device driver, 1.6 [ 0.500500] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.500664] PPP generic driver version 2.4.2 [ 0.500826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.500867] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.500875] ehci-pci: EHCI PCI platform driver [ 0.501119] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.501129] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.501175] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.501248] ehci-pci 0000:00:1a.0: debug port 2 [ 0.501289] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.501293] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.501329] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.505223] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.505225] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 0.505273] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.505316] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.516601] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.516704] usb usb1: default language 0x0409 [ 0.516726] usb usb1: udev 1, busnum 1, minor = 0 [ 0.516729] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.516770] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.516824] usb usb1: Product: EHCI Host Controller [ 0.516862] usb usb1: Manufacturer: Linux 3.11.0-rc5-next20130813-2-iniza-small ehci_hcd [ 0.516917] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.517107] usb usb1: usb_probe_device [ 0.517110] usb usb1: configuration #1 chosen from 1 choice [ 0.517126] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.517158] hub 1-0:1.0: usb_probe_interface [ 0.517160] hub 1-0:1.0: usb_probe_interface - got id [ 0.517163] hub 1-0:1.0: USB hub found [ 0.517210] hub 1-0:1.0: 2 ports detected [ 0.517246] hub 1-0:1.0: standalone hub [ 0.517248] hub 1-0:1.0: no power switching (usb 1.0) [ 0.517249] hub 1-0:1.0: individual port over-current protection [ 0.517251] hub 1-0:1.0: power on to power good time: 20ms [ 0.517262] hub 1-0:1.0: local power source is good [ 0.517318] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.517592] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.517600] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.517645] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.517717] ehci-pci 0000:00:1d.0: debug port 2 [ 0.517757] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.517761] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.517796] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.521689] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.521691] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 0.521739] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.521781] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.532580] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.532668] usb usb2: default language 0x0409 [ 0.532689] usb usb2: udev 1, busnum 2, minor = 128 [ 0.532691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.532732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.532786] usb usb2: Product: EHCI Host Controller [ 0.532824] usb usb2: Manufacturer: Linux 3.11.0-rc5-next20130813-2-iniza-small ehci_hcd [ 0.532879] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.533045] usb usb2: usb_probe_device [ 0.533047] usb usb2: configuration #1 chosen from 1 choice [ 0.533062] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.533092] hub 2-0:1.0: usb_probe_interface [ 0.533094] hub 2-0:1.0: usb_probe_interface - got id [ 0.533097] hub 2-0:1.0: USB hub found [ 0.533141] hub 2-0:1.0: 2 ports detected [ 0.533178] hub 2-0:1.0: standalone hub [ 0.533179] hub 2-0:1.0: no power switching (usb 1.0) [ 0.533181] hub 2-0:1.0: individual port over-current protection [ 0.533182] hub 2-0:1.0: power on to power good time: 20ms [ 0.533193] hub 2-0:1.0: local power source is good [ 0.533244] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.533328] ehci-platform: EHCI generic platform driver [ 0.533385] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.533425] ohci_hcd: block sizes: ed 80 td 96 [ 0.533431] ohci-pci: OHCI PCI platform driver [ 0.533486] ohci-platform: OHCI generic platform driver [ 0.533539] uhci_hcd: USB Universal Host Controller Interface driver [ 0.533778] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.533823] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.543595] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.543631] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.543639] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.543646] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.543654] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.543661] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.543952] usb usb3: default language 0x0409 [ 0.543975] usb usb3: udev 1, busnum 3, minor = 256 [ 0.543977] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.544018] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.544072] usb usb3: Product: xHCI Host Controller [ 0.544110] usb usb3: Manufacturer: Linux 3.11.0-rc5-next20130813-2-iniza-small xhci_hcd [ 0.544165] usb usb3: SerialNumber: 0000:03:00.0 [ 0.544319] usb usb3: usb_probe_device [ 0.544321] usb usb3: configuration #1 chosen from 1 choice [ 0.544327] xHCI xhci_add_endpoint called for root hub [ 0.544329] xHCI xhci_check_bandwidth called for root hub [ 0.544340] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.544371] hub 3-0:1.0: usb_probe_interface [ 0.544373] hub 3-0:1.0: usb_probe_interface - got id [ 0.544375] hub 3-0:1.0: USB hub found [ 0.544425] hub 3-0:1.0: 2 ports detected [ 0.544461] hub 3-0:1.0: standalone hub [ 0.544463] hub 3-0:1.0: no power switching (usb 1.0) [ 0.544464] hub 3-0:1.0: individual port over-current protection [ 0.544466] hub 3-0:1.0: Single TT [ 0.544468] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.544469] hub 3-0:1.0: power on to power good time: 20ms [ 0.544480] hub 3-0:1.0: local power source is good [ 0.544519] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.544616] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.544658] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.544719] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.544770] usb usb4: skipped 1 descriptor after endpoint [ 0.544778] usb usb4: default language 0x0409 [ 0.544798] usb usb4: udev 1, busnum 4, minor = 384 [ 0.544800] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.544842] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.544896] usb usb4: Product: xHCI Host Controller [ 0.544933] usb usb4: Manufacturer: Linux 3.11.0-rc5-next20130813-2-iniza-small xhci_hcd [ 0.544989] usb usb4: SerialNumber: 0000:03:00.0 [ 0.545143] usb usb4: usb_probe_device [ 0.545145] usb usb4: configuration #1 chosen from 1 choice [ 0.545152] xHCI xhci_add_endpoint called for root hub [ 0.545153] xHCI xhci_check_bandwidth called for root hub [ 0.545164] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.545195] hub 4-0:1.0: usb_probe_interface [ 0.545197] hub 4-0:1.0: usb_probe_interface - got id [ 0.545200] hub 4-0:1.0: USB hub found [ 0.545249] hub 4-0:1.0: 2 ports detected [ 0.545285] hub 4-0:1.0: standalone hub [ 0.545287] hub 4-0:1.0: no power switching (usb 1.0) [ 0.545288] hub 4-0:1.0: individual port over-current protection [ 0.545290] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.545292] hub 4-0:1.0: power on to power good time: 20ms [ 0.545303] hub 4-0:1.0: local power source is good [ 0.545339] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.556661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.563026] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.563070] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.563367] mousedev: PS/2 mouse device common for all mice [ 0.563934] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.564008] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.564154] device-mapper: uevent: version 1.0.3 [ 0.564338] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx [ 0.564424] Intel P-state driver initializing. [ 0.564478] Intel pstate controlling: cpu 0 [ 0.564595] Intel pstate controlling: cpu 1 [ 0.564668] Intel pstate controlling: cpu 2 [ 0.564731] Intel pstate controlling: cpu 3 [ 0.564841] ledtrig-cpu: registered to indicate activity on CPUs [ 0.565375] ashmem: initialized [ 0.565619] TCP: cubic registered [ 0.565793] NET: Registered protocol family 10 [ 0.566278] NET: Registered protocol family 17 [ 0.566331] Key type dns_resolver registered [ 0.566788] PM: Hibernation image not present or could not be loaded. [ 0.566794] Loading module verification certificates [ 0.567918] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fa2c826d3c2d34b0ce6f01923973bdd1ef9c8294' [ 0.568004] registered taskstats version 1 [ 0.571131] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.571901] Key type trusted registered [ 0.579402] Key type encrypted registered [ 0.589306] rtc_cmos 00:05: setting system clock to 2013-08-13 20:36:38 UTC (1376426198) [ 0.589879] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.589922] EDD information not available. [ 0.616633] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.616676] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.632559] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.632576] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.640675] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.640943] hub 3-0:1.0: hub_suspend [ 0.640975] usb usb3: bus auto-suspend, wakeup 1 [ 0.644670] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.644764] hub 4-0:1.0: hub_suspend [ 0.644786] usb usb4: bus auto-suspend, wakeup 1 [ 0.653288] usb usb4: usb wakeup-resume [ 0.653303] usb usb4: usb auto-resume [ 0.664614] hub 4-0:1.0: hub_resume [ 0.664663] hub 4-0:1.0: port 1: status 0203 change 0001 [ 0.716590] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.716725] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.772782] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.772796] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.816496] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.817726] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.817802] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.819174] ata1.00: configured for UDMA/133 [ 0.819702] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.820330] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.820434] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.820544] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.821064] sd 0:0:0:0: [sda] Write Protect is off [ 0.821136] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.821367] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.828450] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.868594] sda: sda1 sda2 sda3 [ 0.870447] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.884703] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.884716] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.961148] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.961158] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.961230] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.961626] usb 1-1: usb_probe_device [ 0.961635] usb 1-1: configuration #1 chosen from 1 choice [ 0.961899] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.961975] hub 1-1:1.0: usb_probe_interface [ 0.961980] hub 1-1:1.0: usb_probe_interface - got id [ 0.961987] hub 1-1:1.0: USB hub found [ 0.962237] hub 1-1:1.0: 6 ports detected [ 0.962304] hub 1-1:1.0: standalone hub [ 0.962309] hub 1-1:1.0: individual port power switching [ 0.962312] hub 1-1:1.0: individual port over-current protection [ 0.962315] hub 1-1:1.0: Single TT [ 0.962319] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.962323] hub 1-1:1.0: power on to power good time: 100ms [ 0.962577] hub 1-1:1.0: local power source is good [ 0.963043] hub 1-1:1.0: enabling power on all ports [ 0.964210] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.964309] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.020605] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.020618] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.060808] hub 1-1:1.0: port 2: status 0101 change 0001 [ 1.061563] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.076314] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.132526] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.132542] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.140266] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.140932] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.141011] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.141764] ata2.00: configured for UDMA/133 [ 1.142397] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.142899] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.142993] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.143312] sd 1:0:0:0: [sdb] Write Protect is off [ 1.143383] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.143441] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.144834] sdb: sdb1 sdb2 [ 1.145898] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.160241] usb 1-1: link qh256-0001/ffff880037a5f740 start 1 [1/0 us] [ 1.208959] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.208970] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.209046] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.209477] usb 2-1: usb_probe_device [ 1.209487] usb 2-1: configuration #1 chosen from 1 choice [ 1.209714] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.209807] hub 2-1:1.0: usb_probe_interface [ 1.209812] hub 2-1:1.0: usb_probe_interface - got id [ 1.209820] hub 2-1:1.0: USB hub found [ 1.210068] hub 2-1:1.0: 6 ports detected [ 1.210137] hub 2-1:1.0: standalone hub [ 1.210142] hub 2-1:1.0: individual port power switching [ 1.210145] hub 2-1:1.0: individual port over-current protection [ 1.210149] hub 2-1:1.0: Single TT [ 1.210153] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.210157] hub 2-1:1.0: power on to power good time: 100ms [ 1.210437] hub 2-1:1.0: local power source is good [ 1.211099] hub 2-1:1.0: enabling power on all ports [ 1.212438] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.212474] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 1.313380] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.327674] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.340739] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.341172] usb 4-1: skipped 1 descriptor after endpoint [ 1.341181] usb 4-1: skipped 1 descriptor after endpoint [ 1.341323] usb 4-1: default language 0x0409 [ 1.341685] usb 4-1: udev 2, busnum 4, minor = 385 [ 1.341691] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.341764] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.341837] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.341903] usb 4-1: Manufacturer: MEDION [ 1.341967] usb 4-1: SerialNumber: 3180000000000000092C [ 1.342345] usb 4-1: usb_probe_device [ 1.342352] usb 4-1: configuration #1 chosen from 1 choice [ 1.343368] usb 4-1: Successful Endpoint Configure command [ 1.343478] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 1.343695] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000 [ 1.343812] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.404069] tsc: Refined TSC clocksource calibration: 1596.374 MHz [ 1.412113] usb 2-1: link qh256-0001/ffff880037a5f440 start 1 [1/0 us] [ 1.412300] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.460038] ata4: SATA link down (SStatus 0 SControl 300) [ 1.507385] usb 1-1.2: skipped 1 descriptor after interface [ 1.507859] usb 1-1.2: default language 0x0409 [ 1.510409] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 1.510420] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.510497] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.510584] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.510650] usb 1-1.2: Manufacturer: Logitech [ 1.511071] usb 1-1.2: usb_probe_device [ 1.511081] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.511615] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 1.511916] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.584196] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.779811] ata5: SATA link down (SStatus 0 SControl 300) [ 1.782476] Freeing unused kernel memory: 1332K (ffffffff81d07000 - ffffffff81e54000) [ 1.782559] Write protecting the kernel read-only data: 12288k [ 1.787540] Freeing unused kernel memory: 1044K (ffff8800016fb000 - ffff880001800000) [ 1.791764] Freeing unused kernel memory: 956K (ffff880001b11000 - ffff880001c00000) [ 1.825733] usb 1-1.4: skipped 1 descriptor after configuration [ 1.825744] usb 1-1.4: skipped 5 descriptors after interface [ 1.825751] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.825757] usb 1-1.4: skipped 23 descriptors after interface [ 1.827839] usb 1-1.4: default language 0x0409 [ 1.832202] udevd[121]: starting version 175 [ 1.840225] usb 1-1.4: udev 4, busnum 1, minor = 3 [ 1.840234] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.840303] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.840369] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.840418] usb 1-1.4: Manufacturer: 123 [ 1.840669] usb 1-1.4: usb_probe_device [ 1.840674] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.841364] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.979504] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.979669] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.980218] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.984543] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 1.984614] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.994613] usb-storage 4-1:1.0: usb_probe_interface [ 1.994624] usb-storage 4-1:1.0: usb_probe_interface - got id [ 1.994630] usb-storage 4-1:1.0: USB Mass Storage device detected [ 1.995742] scsi6 : usb-storage 4-1:1.0 [ 1.995985] usbcore: registered new interface driver usb-storage [ 2.013822] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 2.015404] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 2.015573] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.037335] hidraw: raw HID events driver (C) Jiri Kosina [ 2.042226] usbhid 1-1.2:1.0: usb_probe_interface [ 2.042233] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 2.045021] usbcore: registered new interface driver usbhid [ 2.045069] usbhid: USB HID core driver [ 2.053362] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 2.053681] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.087690] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.184399] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.184409] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.184481] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.184885] usb 2-1.5: usb_probe_device [ 2.184892] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.185493] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.185836] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.186306] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010 [ 2.186472] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.403432] Switched to clocksource tsc [ 2.842523] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 2.995262] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 2.995914] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.995970] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.996431] sd 6:0:0:0: [sdc] Write Protect is off [ 2.996497] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.996974] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.998945] sdc: sdc1 sdc2 sdc3 [ 3.000899] sd 6:0:0:0: [sdc] Attached SCSI disk [ 25.897108] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 25.914029] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 25.984915] udevd[621]: starting version 175 [ 26.121391] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 26.121402] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.121408] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 26.121414] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.121416] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 26.121421] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.121424] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 26.121429] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.121431] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 26.227615] lp: driver loaded but no devices found [ 26.568945] wmi: Mapper loaded [ 26.569476] samsung_laptop: detected SABI interface: SwSmi@ [ 26.569481] samsung_laptop: Backlight controlled by ACPI video driver [ 26.585931] cfg80211: Calling CRDA to update world regulatory domain [ 26.594426] cfg80211: World regulatory domain updated: [ 26.594431] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.594433] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.594435] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.594436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.594438] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.594439] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.661928] Bluetooth: Core ver 2.16 [ 26.661989] NET: Registered protocol family 31 [ 26.661992] Bluetooth: HCI device and connection manager initialized [ 26.662013] Bluetooth: HCI socket layer initialized [ 26.662028] Bluetooth: L2CAP socket layer initialized [ 26.662060] Bluetooth: SCO socket layer initialized [ 26.663721] [drm] Initialized drm 1.1.0 20060810 [ 26.788801] Linux video capture interface: v2.00 [ 26.789093] btusb 2-1.5:1.0: usb_probe_interface [ 26.789099] btusb 2-1.5:1.0: usb_probe_interface - got id [ 26.791051] usbcore: registered new interface driver btusb [ 26.791193] usb 2-1.5: link qh1-0e01/ffff88007a0c4240 start 0 [1/2 us] [ 26.840169] ppdev: user-space parallel port driver [ 26.894670] Bluetooth: RFCOMM TTY layer initialized [ 26.894689] Bluetooth: RFCOMM socket layer initialized [ 26.894691] Bluetooth: RFCOMM ver 1.11 [ 27.064531] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.064536] Bluetooth: BNEP filters: protocol multicast [ 27.064554] Bluetooth: BNEP socket layer initialized [ 27.446567] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 27.446575] Copyright(c) 2003-2013 Intel Corporation [ 27.446899] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 27.447126] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 27.512854] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 27.514184] type=1400 audit(1376419025.442:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=920 comm="apparmor_parser" [ 27.514211] type=1400 audit(1376419025.442:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=932 comm="apparmor_parser" [ 27.515064] type=1400 audit(1376419025.442:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=932 comm="apparmor_parser" [ 27.515085] type=1400 audit(1376419025.442:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=920 comm="apparmor_parser" [ 27.515550] type=1400 audit(1376419025.442:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=932 comm="apparmor_parser" [ 27.515603] type=1400 audit(1376419025.442:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=920 comm="apparmor_parser" [ 27.588553] type=1400 audit(1376419025.514:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=994 comm="apparmor_parser" [ 27.591186] type=1400 audit(1376419025.518:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=994 comm="apparmor_parser" [ 27.669803] init: failsafe main process (1007) killed by TERM signal [ 27.697391] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 27.712542] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 27.749032] [drm] Memory usable by graphics device = 2048M [ 27.749042] i915 0000:00:02.0: setting latency timer to 64 [ 27.774377] type=1400 audit(1376419025.702:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1116 comm="apparmor_parser" [ 27.775139] type=1400 audit(1376419025.702:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1116 comm="apparmor_parser" [ 27.783908] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 27.783923] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 27.783925] [drm] Driver supports precise vblank timestamp query. [ 27.784105] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 27.788529] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 27.795030] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 27.795035] [drm] This can cause pipe underruns and display issues. [ 27.795036] [drm] Please upgrade your BIOS to fix this. [ 27.811681] fbcon: inteldrmfb (fb0) is primary device [ 27.898017] uvcvideo 1-1.4:1.0: usb_probe_interface [ 27.898021] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 27.898066] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 27.917429] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6 [ 27.917623] usbcore: registered new interface driver uvcvideo [ 27.917624] USB Video Class driver (1.1.1) [ 27.921835] usb 1-1.4: link qh16-0001/ffff88007a0c4dc0 start 2 [1/0 us] [ 27.921889] usb 1-1.4: unlink qh16-0001/ffff88007a0c4dc0 start 2 [1/0 us] [ 28.203016] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 28.203018] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 28.203020] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 28.203022] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 28.203124] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.232209] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 28.247224] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.253859] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 28.525790] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.532412] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 28.610782] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.859753] Console: switching to colour frame buffer device 170x48 [ 28.862694] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 28.862695] i915 0000:00:02.0: registered panic notifier [ 28.879426] acpi device:33: registered as cooling_device9 [ 28.879965] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 28.880270] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 28.883126] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 28.883587] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 29.037553] init: alsa-restore main process (1190) terminated with status 19 [ 29.044956] usb 1-1.2: link qh8-0e01/ffff880073984a40 start 3 [1/2 us] [ 29.053995] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 29.054895] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 29.057868] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 29.068715] usb 1-1.2: unlink qh8-0e01/ffff880073984a40 start 3 [1/2 us] [ 29.352794] ehci-pci 0000:00:1a.0: reused qh ffff880073984a40 schedule [ 29.352800] usb 1-1.2: link qh8-0e01/ffff880073984a40 start 3 [1/2 us] [ 29.768399] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 29.920072] usb 1-1.4: usb auto-suspend, wakeup 0 [ 30.693397] usb usb3: usb auto-resume [ 30.693419] hub 3-0:1.0: hub_resume [ 30.693489] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.693506] hub 3-0:1.0: hub_suspend [ 30.693520] usb usb3: bus auto-suspend, wakeup 1 [ 30.693547] usb usb3: usb auto-resume [ 30.703258] hub 3-0:1.0: hub_resume [ 30.703291] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.703311] hub 3-0:1.0: hub_suspend [ 30.703327] usb usb3: bus auto-suspend, wakeup 1 [ 30.703888] usb 1-1.4: usb auto-resume [ 30.751369] usb 1-1.4: finish resume [ 30.758833] usb usb3: usb auto-resume [ 30.758855] hub 3-0:1.0: hub_resume [ 30.758903] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.758930] hub 3-0:1.0: hub_suspend [ 30.758950] usb usb3: bus auto-suspend, wakeup 1 [ 30.759008] usb usb3: usb auto-resume [ 30.767193] hub 3-0:1.0: hub_resume [ 30.767230] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.767239] hub 3-0:1.0: hub_suspend [ 30.767258] usb usb3: bus auto-suspend, wakeup 1 [ 30.769591] usb usb3: usb auto-resume [ 30.779219] hub 3-0:1.0: hub_resume [ 30.779261] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.779284] hub 3-0:1.0: hub_suspend [ 30.779302] usb usb3: bus auto-suspend, wakeup 1 [ 30.779362] usb usb3: usb auto-resume [ 30.791203] hub 3-0:1.0: hub_resume [ 30.791268] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.791281] hub 3-0:1.0: hub_suspend [ 30.791320] usb usb3: bus auto-suspend, wakeup 1 [ 30.798045] usb usb3: usb auto-resume [ 30.807180] hub 3-0:1.0: hub_resume [ 30.807213] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.807249] hub 3-0:1.0: hub_suspend [ 30.807265] usb usb3: bus auto-suspend, wakeup 1 [ 30.807325] usb usb3: usb auto-resume [ 30.819266] hub 3-0:1.0: hub_resume [ 30.819353] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.819373] hub 3-0:1.0: hub_suspend [ 30.819388] usb usb3: bus auto-suspend, wakeup 1 [ 30.832584] usb usb3: usb auto-resume [ 30.832604] hub 3-0:1.0: hub_resume [ 30.832673] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.832701] hub 3-0:1.0: hub_suspend [ 30.832714] usb usb3: bus auto-suspend, wakeup 1 [ 30.835326] usb usb3: usb auto-resume [ 30.847135] hub 3-0:1.0: hub_resume [ 30.847170] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.847192] hub 3-0:1.0: hub_suspend [ 30.847224] usb usb3: bus auto-suspend, wakeup 1 [ 30.847293] usb usb3: usb auto-resume [ 30.859191] hub 3-0:1.0: hub_resume [ 30.859259] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.859280] hub 3-0:1.0: hub_suspend [ 30.859297] usb usb3: bus auto-suspend, wakeup 1 [ 30.860526] usb usb3: usb auto-resume [ 30.871141] hub 3-0:1.0: hub_resume [ 30.871197] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.871243] hub 3-0:1.0: hub_suspend [ 30.871263] usb usb3: bus auto-suspend, wakeup 1 [ 30.871352] usb usb3: usb auto-resume [ 30.883155] hub 3-0:1.0: hub_resume [ 30.883238] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.883255] hub 3-0:1.0: hub_suspend [ 30.883269] usb usb3: bus auto-suspend, wakeup 1 [ 30.888163] usb usb3: usb auto-resume [ 30.899231] hub 3-0:1.0: hub_resume [ 30.899280] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.899310] hub 3-0:1.0: hub_suspend [ 30.899336] usb usb3: bus auto-suspend, wakeup 1 [ 30.899454] usb usb3: usb auto-resume [ 30.911109] hub 3-0:1.0: hub_resume [ 30.911160] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.911187] hub 3-0:1.0: hub_suspend [ 30.911206] usb usb3: bus auto-suspend, wakeup 1 [ 30.912693] usb usb3: usb auto-resume [ 30.923087] hub 3-0:1.0: hub_resume [ 30.923169] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.923186] hub 3-0:1.0: hub_suspend [ 30.923203] usb usb3: bus auto-suspend, wakeup 1 [ 30.923227] usb usb3: usb auto-resume [ 30.935090] hub 3-0:1.0: hub_resume [ 30.935187] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.935208] hub 3-0:1.0: hub_suspend [ 30.935226] usb usb3: bus auto-suspend, wakeup 1 [ 30.938722] usb usb3: usb auto-resume [ 30.947106] hub 3-0:1.0: hub_resume [ 30.947194] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.947214] hub 3-0:1.0: hub_suspend [ 30.947232] usb usb3: bus auto-suspend, wakeup 1 [ 30.947315] usb usb3: usb auto-resume [ 30.959064] hub 3-0:1.0: hub_resume [ 30.959397] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.959415] hub 3-0:1.0: hub_suspend [ 30.959432] usb usb3: bus auto-suspend, wakeup 1 [ 30.962249] usb usb3: usb auto-resume [ 30.971460] hub 3-0:1.0: hub_resume [ 30.971512] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.971541] hub 3-0:1.0: hub_suspend [ 30.971558] usb usb3: bus auto-suspend, wakeup 1 [ 30.971643] usb usb3: usb auto-resume [ 30.983064] hub 3-0:1.0: hub_resume [ 30.983315] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.983332] hub 3-0:1.0: hub_suspend [ 30.983348] usb usb3: bus auto-suspend, wakeup 1 [ 31.987439] usb usb3: usb auto-resume [ 31.987463] hub 3-0:1.0: hub_resume [ 31.987511] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.987534] hub 3-0:1.0: hub_suspend [ 31.987550] usb usb3: bus auto-suspend, wakeup 1 [ 31.987616] usb usb3: usb auto-resume [ 31.998343] hub 3-0:1.0: hub_resume [ 31.998411] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.998430] hub 3-0:1.0: hub_suspend [ 31.998447] usb usb3: bus auto-suspend, wakeup 1 [ 32.000719] usb usb3: usb auto-resume [ 32.010328] hub 3-0:1.0: hub_resume [ 32.010370] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.010395] hub 3-0:1.0: hub_suspend [ 32.010414] usb usb3: bus auto-suspend, wakeup 1 [ 32.010478] usb usb3: usb auto-resume [ 32.022311] hub 3-0:1.0: hub_resume [ 32.022351] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.022363] hub 3-0:1.0: hub_suspend [ 32.022379] usb usb3: bus auto-suspend, wakeup 1 [ 32.023693] usb usb3: usb auto-resume [ 32.034321] hub 3-0:1.0: hub_resume [ 32.034366] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.034391] hub 3-0:1.0: hub_suspend [ 32.034410] usb usb3: bus auto-suspend, wakeup 1 [ 32.034481] usb usb3: usb auto-resume [ 32.046337] hub 3-0:1.0: hub_resume [ 32.046449] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.046468] hub 3-0:1.0: hub_suspend [ 32.046485] usb usb3: bus auto-suspend, wakeup 1 [ 32.055281] usb usb3: usb auto-resume [ 32.066484] hub 3-0:1.0: hub_resume [ 32.066529] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.066565] hub 3-0:1.0: hub_suspend [ 32.066601] usb usb3: bus auto-suspend, wakeup 1 [ 32.066693] usb usb3: usb auto-resume [ 32.078316] hub 3-0:1.0: hub_resume [ 32.078388] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.078403] hub 3-0:1.0: hub_suspend [ 32.078454] usb usb3: bus auto-suspend, wakeup 1 [ 32.079333] usb usb3: usb auto-resume [ 32.090303] hub 3-0:1.0: hub_resume [ 32.090398] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.090416] hub 3-0:1.0: hub_suspend [ 32.090429] usb usb3: bus auto-suspend, wakeup 1 [ 32.090500] usb usb3: usb auto-resume [ 32.102309] hub 3-0:1.0: hub_resume [ 32.102386] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.102408] hub 3-0:1.0: hub_suspend [ 32.102424] usb usb3: bus auto-suspend, wakeup 1 [ 32.103903] usb usb3: usb auto-resume [ 32.114262] hub 3-0:1.0: hub_resume [ 32.114336] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.114350] hub 3-0:1.0: hub_suspend [ 32.114372] usb usb3: bus auto-suspend, wakeup 1 [ 32.114470] usb usb3: usb auto-resume [ 32.126241] hub 3-0:1.0: hub_resume [ 32.126282] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.126299] hub 3-0:1.0: hub_suspend [ 32.126317] usb usb3: bus auto-suspend, wakeup 1 [ 32.127839] usb usb3: usb auto-resume [ 32.138277] hub 3-0:1.0: hub_resume [ 32.138414] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.138438] hub 3-0:1.0: hub_suspend [ 32.138469] usb usb3: bus auto-suspend, wakeup 1 [ 32.138491] usb usb3: usb auto-resume [ 32.150235] hub 3-0:1.0: hub_resume [ 32.150334] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.150365] hub 3-0:1.0: hub_suspend [ 32.150379] usb usb3: bus auto-suspend, wakeup 1 [ 32.154406] usb usb3: usb auto-resume [ 32.166237] hub 3-0:1.0: hub_resume [ 32.166374] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.166392] hub 3-0:1.0: hub_suspend [ 32.166406] usb usb3: bus auto-suspend, wakeup 1 [ 32.166425] usb usb3: usb auto-resume [ 32.178223] hub 3-0:1.0: hub_resume [ 32.178267] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.178286] hub 3-0:1.0: hub_suspend [ 32.178304] usb usb3: bus auto-suspend, wakeup 1 [ 32.181567] usb usb3: usb auto-resume [ 32.190216] hub 3-0:1.0: hub_resume [ 32.190298] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.190320] hub 3-0:1.0: hub_suspend [ 32.190334] usb usb3: bus auto-suspend, wakeup 1 [ 32.190357] usb usb3: usb auto-resume [ 32.202238] hub 3-0:1.0: hub_resume [ 32.202309] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.202346] hub 3-0:1.0: hub_suspend [ 32.202366] usb usb3: bus auto-suspend, wakeup 1 [ 32.203203] usb usb3: usb auto-resume [ 32.214218] hub 3-0:1.0: hub_resume [ 32.214289] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.214306] hub 3-0:1.0: hub_suspend [ 32.214320] usb usb3: bus auto-suspend, wakeup 1 [ 32.214347] usb usb3: usb auto-resume [ 32.226224] hub 3-0:1.0: hub_resume [ 32.226304] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.226325] hub 3-0:1.0: hub_suspend [ 32.226354] usb usb3: bus auto-suspend, wakeup 1 [ 32.231180] usb usb3: usb auto-resume [ 32.242248] hub 3-0:1.0: hub_resume [ 32.242326] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.242346] hub 3-0:1.0: hub_suspend [ 32.242361] usb usb3: bus auto-suspend, wakeup 1 [ 32.242387] usb usb3: usb auto-resume [ 32.254178] hub 3-0:1.0: hub_resume [ 32.254261] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.254283] hub 3-0:1.0: hub_suspend [ 32.254310] usb usb3: bus auto-suspend, wakeup 1 [ 32.255540] usb usb3: usb auto-resume [ 32.266204] hub 3-0:1.0: hub_resume [ 32.266251] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.266291] hub 3-0:1.0: hub_suspend [ 32.266374] usb usb3: bus auto-suspend, wakeup 1 [ 32.266456] usb usb3: usb auto-resume [ 32.278131] hub 3-0:1.0: hub_resume [ 32.278253] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.278273] hub 3-0:1.0: hub_suspend [ 32.278288] usb usb3: bus auto-suspend, wakeup 1 [ 32.279409] usb usb3: usb auto-resume [ 32.290176] hub 3-0:1.0: hub_resume [ 32.290245] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.290272] hub 3-0:1.0: hub_suspend [ 32.290315] usb usb3: bus auto-suspend, wakeup 1 [ 32.290427] usb usb3: usb auto-resume [ 32.302163] hub 3-0:1.0: hub_resume [ 32.302344] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.302370] hub 3-0:1.0: hub_suspend [ 32.302391] usb usb3: bus auto-suspend, wakeup 1 [ 32.304098] usb usb3: usb auto-resume [ 32.314212] hub 3-0:1.0: hub_resume [ 32.314374] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.314398] hub 3-0:1.0: hub_suspend [ 32.314419] usb usb3: bus auto-suspend, wakeup 1 [ 32.314495] usb usb3: usb auto-resume [ 32.326140] hub 3-0:1.0: hub_resume [ 32.326206] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.326243] hub 3-0:1.0: hub_suspend [ 32.326263] usb usb3: bus auto-suspend, wakeup 1 [ 32.328024] usb usb3: usb auto-resume [ 32.338144] hub 3-0:1.0: hub_resume [ 32.338248] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.338275] hub 3-0:1.0: hub_suspend [ 32.338297] usb usb3: bus auto-suspend, wakeup 1 [ 32.338339] usb usb3: usb auto-resume [ 32.350181] hub 3-0:1.0: hub_resume [ 32.350327] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.350355] hub 3-0:1.0: hub_suspend [ 32.350377] usb usb3: bus auto-suspend, wakeup 1 [ 32.352917] usb usb3: usb auto-resume [ 32.362103] hub 3-0:1.0: hub_resume [ 32.362213] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.362240] hub 3-0:1.0: hub_suspend [ 32.362261] usb usb3: bus auto-suspend, wakeup 1 [ 32.362284] usb usb3: usb auto-resume [ 32.374117] hub 3-0:1.0: hub_resume [ 32.374194] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.374249] hub 3-0:1.0: hub_suspend [ 32.374271] usb usb3: bus auto-suspend, wakeup 1 [ 32.377979] usb usb3: usb auto-resume [ 32.386088] hub 3-0:1.0: hub_resume [ 32.386150] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.386203] hub 3-0:1.0: hub_suspend [ 32.386241] usb usb3: bus auto-suspend, wakeup 1 [ 32.386337] usb usb3: usb auto-resume [ 32.398077] hub 3-0:1.0: hub_resume [ 32.398158] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.398193] hub 3-0:1.0: hub_suspend [ 32.398210] usb usb3: bus auto-suspend, wakeup 1 [ 32.399686] usb usb3: usb auto-resume [ 32.410096] hub 3-0:1.0: hub_resume [ 32.410181] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.410215] hub 3-0:1.0: hub_suspend [ 32.410232] usb usb3: bus auto-suspend, wakeup 1 [ 32.410258] usb usb3: usb auto-resume [ 32.422076] hub 3-0:1.0: hub_resume [ 32.422164] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.422201] hub 3-0:1.0: hub_suspend [ 32.422218] usb usb3: bus auto-suspend, wakeup 1 [ 32.423979] usb usb3: usb auto-resume [ 32.434038] hub 3-0:1.0: hub_resume [ 32.434088] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.434120] hub 3-0:1.0: hub_suspend [ 32.434156] usb usb3: bus auto-suspend, wakeup 1 [ 32.434262] usb usb3: usb auto-resume [ 32.446029] hub 3-0:1.0: hub_resume [ 32.446082] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.446116] hub 3-0:1.0: hub_suspend [ 32.446139] usb usb3: bus auto-suspend, wakeup 1 [ 32.447623] usb usb3: usb auto-resume [ 32.458074] hub 3-0:1.0: hub_resume [ 32.458129] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.458160] hub 3-0:1.0: hub_suspend [ 32.458178] usb usb3: bus auto-suspend, wakeup 1 [ 32.458277] usb usb3: usb auto-resume [ 32.470014] hub 3-0:1.0: hub_resume [ 32.470102] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.470133] hub 3-0:1.0: hub_suspend [ 32.470160] usb usb3: bus auto-suspend, wakeup 1 [ 32.472218] usb usb3: usb auto-resume [ 32.482021] hub 3-0:1.0: hub_resume [ 32.482087] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.482131] hub 3-0:1.0: hub_suspend [ 32.482154] usb usb3: bus auto-suspend, wakeup 1 [ 32.482258] usb usb3: usb auto-resume [ 32.494000] hub 3-0:1.0: hub_resume [ 32.494057] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.494076] hub 3-0:1.0: hub_suspend [ 32.494100] usb usb3: bus auto-suspend, wakeup 1 [ 33.497126] usb usb3: usb auto-resume [ 33.497153] hub 3-0:1.0: hub_resume [ 33.497343] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.497404] hub 3-0:1.0: hub_suspend [ 33.497451] usb usb3: bus auto-suspend, wakeup 1 [ 33.497562] usb usb3: usb auto-resume [ 33.509345] hub 3-0:1.0: hub_resume [ 33.509633] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.509665] hub 3-0:1.0: hub_suspend [ 33.509690] usb usb3: bus auto-suspend, wakeup 1 [ 33.514113] usb usb3: usb auto-resume [ 33.525373] hub 3-0:1.0: hub_resume [ 33.525475] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.525517] hub 3-0:1.0: hub_suspend [ 33.525586] usb usb3: bus auto-suspend, wakeup 1 [ 33.525707] usb usb3: usb auto-resume [ 33.537330] hub 3-0:1.0: hub_resume [ 33.537440] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.537470] hub 3-0:1.0: hub_suspend [ 33.537495] usb usb3: bus auto-suspend, wakeup 1 [ 33.542479] usb usb3: usb auto-resume [ 33.553347] hub 3-0:1.0: hub_resume [ 33.553441] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.553490] hub 3-0:1.0: hub_suspend [ 33.553559] usb usb3: bus auto-suspend, wakeup 1 [ 33.553682] usb usb3: usb auto-resume [ 33.565254] hub 3-0:1.0: hub_resume [ 33.565340] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.565387] hub 3-0:1.0: hub_suspend [ 33.565414] usb usb3: bus auto-suspend, wakeup 1 [ 33.567188] usb usb3: usb auto-resume [ 33.577324] hub 3-0:1.0: hub_resume [ 33.577508] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.577534] hub 3-0:1.0: hub_suspend [ 33.577553] usb usb3: bus auto-suspend, wakeup 1 [ 33.577587] usb usb3: usb auto-resume [ 33.589283] hub 3-0:1.0: hub_resume [ 33.589403] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.589430] hub 3-0:1.0: hub_suspend [ 33.589450] usb usb3: bus auto-suspend, wakeup 1 [ 33.592479] usb usb3: usb auto-resume [ 33.601282] hub 3-0:1.0: hub_resume [ 33.601442] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.601468] hub 3-0:1.0: hub_suspend [ 33.601488] usb usb3: bus auto-suspend, wakeup 1 [ 33.601527] usb usb3: usb auto-resume [ 33.613276] hub 3-0:1.0: hub_resume [ 33.613397] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.613424] hub 3-0:1.0: hub_suspend [ 33.613446] usb usb3: bus auto-suspend, wakeup 1 [ 33.619006] usb usb3: usb auto-resume [ 33.629300] hub 3-0:1.0: hub_resume [ 33.629395] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.629435] hub 3-0:1.0: hub_suspend [ 33.629499] usb usb3: bus auto-suspend, wakeup 1 [ 33.629614] usb usb3: usb auto-resume [ 33.641242] hub 3-0:1.0: hub_resume [ 33.641372] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.641398] hub 3-0:1.0: hub_suspend [ 33.641418] usb usb3: bus auto-suspend, wakeup 1 [ 33.646065] usb usb3: usb auto-resume [ 33.657242] hub 3-0:1.0: hub_resume [ 33.657339] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.657364] hub 3-0:1.0: hub_suspend [ 33.657383] usb usb3: bus auto-suspend, wakeup 1 [ 33.657411] usb usb3: usb auto-resume [ 33.669251] hub 3-0:1.0: hub_resume [ 33.669356] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.669390] hub 3-0:1.0: hub_suspend [ 33.669409] usb usb3: bus auto-suspend, wakeup 1 [ 33.721008] usb usb3: usb auto-resume [ 33.721030] hub 3-0:1.0: hub_resume [ 33.721091] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.721129] hub 3-0:1.0: hub_suspend [ 33.721150] usb usb3: bus auto-suspend, wakeup 1 [ 33.721217] usb usb3: usb auto-resume [ 33.733210] hub 3-0:1.0: hub_resume [ 33.733293] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.733323] hub 3-0:1.0: hub_suspend [ 33.733339] usb usb3: bus auto-suspend, wakeup 1 [ 34.855393] wlan0: authenticate with 00:04:0e:e4:00:3d [ 34.860450] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 34.862234] wlan0: authenticated [ 34.862468] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 34.862473] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 34.864314] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 34.868030] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 34.875537] wlan0: associated [ 34.875651] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 35.771807] usb 1-1.4: usb auto-suspend, wakeup 0 [ 37.837862] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 37.884360] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-rc5-next20130813-3-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Tue Aug 13 18:40:44 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE [ 0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE [ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x02050000, 0x02050fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37962000-0x37ca8fff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87424 r8192 d23168 u262144 [ 0.000000] pcpu-alloc: s87424 r8192 d23168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938460K/4086000K available (7136K kernel code, 1047K rwdata, 3140K rodata, 1332K init, 1984K bss, 147540K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.452 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.90 BogoMIPS (lpj=6385808) [ 0.000081] pid_max: default: 32768 minimum: 301 [ 0.000245] Security Framework initialized [ 0.000303] AppArmor: AppArmor initialized [ 0.000339] Yama: becoming mindful. [ 0.000752] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001863] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002365] Mount-cache hash table entries: 256 [ 0.002927] Initializing cgroup subsys memory [ 0.003023] Initializing cgroup subsys devices [ 0.003062] Initializing cgroup subsys freezer [ 0.003102] Initializing cgroup subsys blkio [ 0.003139] Initializing cgroup subsys perf_event [ 0.003178] Initializing cgroup subsys hugetlb [ 0.003267] Disabled fast string operations [ 0.003304] CPU: Physical Processor ID: 0 [ 0.003341] CPU: Processor Core ID: 0 [ 0.003381] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003381] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003447] mce: CPU supports 7 MCE banks [ 0.003497] CPU0: Thermal monitoring enabled (TM1) [ 0.003542] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003542] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003542] tlb_flushall_shift: 5 [ 0.003716] Freeing SMP alternatives memory: 24K (ffffffff81e54000 - ffffffff81e5a000) [ 0.004799] ACPI: Core revision 20130725 [ 0.015562] ACPI: All ACPI Tables successfully acquired [ 0.029498] ftrace: allocating 27134 entries in 106 pages [ 0.044286] Enabling x2apic [ 0.044324] Enabled x2apic [ 0.044387] Switched APIC routing to physical x2apic. [ 0.045352] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085050] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.085164] TSC deadline timer enabled [ 0.085177] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.085325] ... version: 3 [ 0.085361] ... bit width: 48 [ 0.085397] ... generic registers: 4 [ 0.085433] ... value mask: 0000ffffffffffff [ 0.085472] ... max period: 0000ffffffffffff [ 0.085510] ... fixed-purpose events: 3 [ 0.085546] ... event mask: 000000070000000f [ 0.098538] Disabled fast string operations [ 0.101720] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.113303] Disabled fast string operations [ 0.126915] Disabled fast string operations [ 0.087561] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.129040] Brought up 4 CPUs [ 0.129142] smpboot: Total of 4 processors activated (12771.61 BogoMIPS) [ 0.133203] devtmpfs: initialized [ 0.135226] EVM: security.selinux [ 0.135262] EVM: security.SMACK64 [ 0.135296] EVM: security.capability [ 0.135417] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.136989] regulator-dummy: no parameters [ 0.137176] NET: Registered protocol family 16 [ 0.137518] cpuidle: using governor ladder [ 0.137555] cpuidle: using governor menu [ 0.137629] ACPI: bus type PCI registered [ 0.137776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.137836] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.144809] PCI: Using configuration type 1 for base access [ 0.148163] bio: create slab <bio-0> at 0 [ 0.148618] ACPI: Added _OSI(Module Device) [ 0.148656] ACPI: Added _OSI(Processor Device) [ 0.148693] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.148731] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150598] ACPI: EC: Look up EC in DSDT [ 0.176853] ACPI: Executed 1 blocks of module-level executable AML code [ 0.182818] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.194813] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.195415] ACPI: Dynamic OEM Table Load: [ 0.195485] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.205290] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.205970] ACPI: Dynamic OEM Table Load: [ 0.206039] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.217451] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.218026] ACPI: Dynamic OEM Table Load: [ 0.218095] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.231239] ACPI: Interpreter enabled [ 0.231289] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.231398] ACPI: (supports S0 S1 S3 S4 S5) [ 0.231435] ACPI: Using IOAPIC for interrupt routing [ 0.231528] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.231817] ACPI: No dock devices found. [ 0.255648] ACPI: Power Resource [FN00] (off) [ 0.255869] ACPI: Power Resource [FN01] (off) [ 0.256085] ACPI: Power Resource [FN02] (off) [ 0.256301] ACPI: Power Resource [FN03] (off) [ 0.256521] ACPI: Power Resource [FN04] (off) [ 0.257708] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.258083] \_SB_.PCI0:_OSC invalid UUID [ 0.258085] _OSC request data:1 8 0 [ 0.258991] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.259103] PCI host bridge to bus 0000:00 [ 0.259141] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.259181] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.259222] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.259263] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.259304] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.259346] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.259402] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.259554] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.259568] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.259575] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.259581] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.259764] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.259792] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit] [ 0.259878] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.260035] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.260059] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff] [ 0.260160] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.260305] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.260325] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.260404] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.260487] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.260590] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.260681] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.260767] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.260876] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.260967] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.261056] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.261160] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.261250] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.261407] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.261432] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff] [ 0.261533] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.261677] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.261919] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.261941] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.261951] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.261961] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.261971] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.261981] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.261992] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff] [ 0.262044] pci 0000:00:1f.2: PME# supported from D3hot [ 0.262177] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.262197] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.262221] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.262605] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.262785] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.263513] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.263683] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.269402] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.269447] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.269623] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.269693] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.269816] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.269892] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.270229] pci 0000:02:00.0: supports D1 D2 [ 0.270231] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.270353] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.277338] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.277399] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.277409] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.277534] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.277572] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.277772] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.285309] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.285385] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.285567] \_SB_.PCI0:_OSC invalid UUID [ 0.285569] _OSC request data:1 1f 0 [ 0.285574] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.285630] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.286601] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.286949] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.287342] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.287686] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.288031] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.288403] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.288797] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.289143] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.290006] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.290085] ACPI: \_SB_.PCI0: notify handler is installed [ 0.290149] Found 1 acpi root devices [ 0.290217] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.290503] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.290561] vgaarb: loaded [ 0.290595] vgaarb: bridge control possible 0000:00:02.0 [ 0.291305] SCSI subsystem initialized [ 0.291343] ACPI: bus type ATA registered [ 0.291493] libata version 3.00 loaded. [ 0.291555] ACPI: bus type USB registered [ 0.291638] usbcore: registered new interface driver usbfs [ 0.291699] usbcore: registered new interface driver hub [ 0.291792] usbcore: registered new device driver usb [ 0.292178] PCI: Using ACPI for IRQ routing [ 0.293888] PCI: pci_cache_line_size set to 64 bytes [ 0.294000] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.294002] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.294005] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.294006] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.294252] NetLabel: Initializing [ 0.294288] NetLabel: domain hash size = 128 [ 0.294324] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.294407] NetLabel: unlabeled traffic allowed by default [ 0.294535] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.294724] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.296797] Switched to clocksource hpet [ 0.314430] AppArmor: AppArmor Filesystem Enabled [ 0.314518] pnp: PnP ACPI init [ 0.314570] ACPI: bus type PNP registered [ 0.314892] pnp 00:00: [dma 4] [ 0.315006] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.315050] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.315217] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.315275] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.315352] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.315395] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.315436] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.315476] system 00:04: [io 0xffff] has been reserved [ 0.315516] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.315557] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.315597] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.315638] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.315678] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.315718] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.315760] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315808] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.315903] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.315945] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.316006] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.316088] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.316397] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.316440] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.316481] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.316523] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.316565] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.316607] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.316649] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.316690] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.316733] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.316786] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.316829] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317553] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.317594] pnp: PnP ACPI: found 11 devices [ 0.317631] ACPI: bus type PNP unregistered [ 0.325689] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.325734] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.325785] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.325825] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.325873] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.325933] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.325976] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.326448] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.326450] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.326452] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.326454] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.326456] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.326459] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.326461] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.326463] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.326465] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.326600] NET: Registered protocol family 2 [ 0.327006] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.327244] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.327561] TCP: Hash tables configured (established 32768 bind 32768) [ 0.327860] TCP: reno registered [ 0.327913] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.328018] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.328310] NET: Registered protocol family 1 [ 0.328366] pci 0000:00:02.0: Boot video device [ 0.329157] PCI: CLS 64 bytes, default 64 [ 0.329368] Trying to unpack rootfs image as initramfs... [ 0.405771] Freeing initrd memory: 3356K (ffff880037962000 - ffff880037ca9000) [ 0.405832] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.405874] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.406299] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406346] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406398] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406448] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.406573] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 0.407131] Scanning for low memory corruption every 60 seconds [ 0.407766] Initialise module verification [ 0.407867] audit: initializing netlink socket (disabled) [ 0.407924] type=2000 audit(1376426299.396:1): initialized [ 0.438146] bounce pool size: 64 pages [ 0.438209] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.438928] VFS: Disk quotas dquot_6.5.2 [ 0.439006] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.439885] fuse init (API version 7.22) [ 0.440031] msgmni has been set to 7698 [ 0.440775] Key type asymmetric registered [ 0.440813] Asymmetric key parser 'x509' registered [ 0.440900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.441014] io scheduler noop registered [ 0.441052] io scheduler deadline registered (default) [ 0.441128] io scheduler cfq registered [ 0.441541] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.441621] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.441808] intel_idle: MWAIT substates: 0x21120 [ 0.441810] intel_idle: v0.4 model 0x2A [ 0.441811] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.442546] ACPI: AC Adapter [ADP1] (on-line) [ 0.442870] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.443141] ACPI: Lid Switch [LID0] [ 0.443250] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.443309] ACPI: Power Button [PWRB] [ 0.443411] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.443467] ACPI: Power Button [PWRF] [ 0.443602] ACPI: Fan [FAN0] (off) [ 0.443689] ACPI: Fan [FAN1] (off) [ 0.443771] ACPI: Fan [FAN2] (off) [ 0.443855] ACPI: Fan [FAN3] (off) [ 0.443942] ACPI: Fan [FAN4] (off) [ 0.444061] ACPI: Requesting acpi_cpufreq [ 0.447462] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.447503] ACPI: Thermal Zone [TZ00] (64 C) [ 0.447962] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.448002] ACPI: Thermal Zone [TZ01] (30 C) [ 0.448097] GHES: HEST is not enabled! [ 0.448367] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.454717] ACPI: Battery Slot [BAT1] (battery present) [ 0.454731] Linux agpgart interface v0.103 [ 0.457495] brd: module loaded [ 0.458917] loop: module loaded [ 0.459189] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.459237] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.462391] ahci 0000:00:1f.2: version 3.0 [ 0.462547] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.462770] ahci: SSS flag set, parallel bus scan disabled [ 0.476697] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.476762] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.476821] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.501696] scsi0 : ahci [ 0.502032] scsi1 : ahci [ 0.502283] scsi2 : ahci [ 0.502537] scsi3 : ahci [ 0.502797] scsi4 : ahci [ 0.503051] scsi5 : ahci [ 0.503178] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.503232] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.503283] ata3: DUMMY [ 0.503316] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.503369] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.503420] ata6: DUMMY [ 0.504329] libphy: Fixed MDIO Bus: probed [ 0.504658] tun: Universal TUN/TAP device driver, 1.6 [ 0.504696] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.504840] PPP generic driver version 2.4.2 [ 0.505005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.505046] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.505054] ehci-pci: EHCI PCI platform driver [ 0.505299] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.505310] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.505355] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.505428] ehci-pci 0000:00:1a.0: debug port 2 [ 0.505468] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.505472] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.505508] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.509383] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.509385] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 0.509434] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.509477] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.520656] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.520758] usb usb1: default language 0x0409 [ 0.520780] usb usb1: udev 1, busnum 1, minor = 0 [ 0.520782] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.520824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.520878] usb usb1: Product: EHCI Host Controller [ 0.520916] usb usb1: Manufacturer: Linux 3.11.0-rc5-next20130813-3-iniza-small ehci_hcd [ 0.520972] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.521160] usb usb1: usb_probe_device [ 0.521163] usb usb1: configuration #1 chosen from 1 choice [ 0.521179] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.521212] hub 1-0:1.0: usb_probe_interface [ 0.521214] hub 1-0:1.0: usb_probe_interface - got id [ 0.521217] hub 1-0:1.0: USB hub found [ 0.521263] hub 1-0:1.0: 2 ports detected [ 0.521300] hub 1-0:1.0: standalone hub [ 0.521301] hub 1-0:1.0: no power switching (usb 1.0) [ 0.521303] hub 1-0:1.0: individual port over-current protection [ 0.521305] hub 1-0:1.0: power on to power good time: 20ms [ 0.521316] hub 1-0:1.0: local power source is good [ 0.521372] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.521645] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.521653] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.521698] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.521770] ehci-pci 0000:00:1d.0: debug port 2 [ 0.521810] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.521813] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.521848] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.525729] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.525731] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 0.525778] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.525821] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.536646] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.536750] usb usb2: default language 0x0409 [ 0.536772] usb usb2: udev 1, busnum 2, minor = 128 [ 0.536774] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.536816] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.536870] usb usb2: Product: EHCI Host Controller [ 0.536909] usb usb2: Manufacturer: Linux 3.11.0-rc5-next20130813-3-iniza-small ehci_hcd [ 0.536964] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.537141] usb usb2: usb_probe_device [ 0.537144] usb usb2: configuration #1 chosen from 1 choice [ 0.537159] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.537190] hub 2-0:1.0: usb_probe_interface [ 0.537192] hub 2-0:1.0: usb_probe_interface - got id [ 0.537195] hub 2-0:1.0: USB hub found [ 0.537240] hub 2-0:1.0: 2 ports detected [ 0.537277] hub 2-0:1.0: standalone hub [ 0.537278] hub 2-0:1.0: no power switching (usb 1.0) [ 0.537280] hub 2-0:1.0: individual port over-current protection [ 0.537281] hub 2-0:1.0: power on to power good time: 20ms [ 0.537292] hub 2-0:1.0: local power source is good [ 0.537345] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.537431] ehci-platform: EHCI generic platform driver [ 0.537490] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.537530] ohci_hcd: block sizes: ed 80 td 96 [ 0.537536] ohci-pci: OHCI PCI platform driver [ 0.537591] ohci-platform: OHCI generic platform driver [ 0.537643] uhci_hcd: USB Universal Host Controller Interface driver [ 0.537888] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.537933] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.547704] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.547739] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.547747] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.547754] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.547762] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.547769] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.548060] usb usb3: default language 0x0409 [ 0.548081] usb usb3: udev 1, busnum 3, minor = 256 [ 0.548084] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.548126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.548179] usb usb3: Product: xHCI Host Controller [ 0.548218] usb usb3: Manufacturer: Linux 3.11.0-rc5-next20130813-3-iniza-small xhci_hcd [ 0.548273] usb usb3: SerialNumber: 0000:03:00.0 [ 0.548431] usb usb3: usb_probe_device [ 0.548433] usb usb3: configuration #1 chosen from 1 choice [ 0.548440] xHCI xhci_add_endpoint called for root hub [ 0.548441] xHCI xhci_check_bandwidth called for root hub [ 0.548453] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.548483] hub 3-0:1.0: usb_probe_interface [ 0.548486] hub 3-0:1.0: usb_probe_interface - got id [ 0.548488] hub 3-0:1.0: USB hub found [ 0.548537] hub 3-0:1.0: 2 ports detected [ 0.548574] hub 3-0:1.0: standalone hub [ 0.548575] hub 3-0:1.0: no power switching (usb 1.0) [ 0.548577] hub 3-0:1.0: individual port over-current protection [ 0.548578] hub 3-0:1.0: Single TT [ 0.548580] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.548581] hub 3-0:1.0: power on to power good time: 20ms [ 0.548593] hub 3-0:1.0: local power source is good [ 0.548651] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.548726] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.548769] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.548830] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.548879] usb usb4: skipped 1 descriptor after endpoint [ 0.548888] usb usb4: default language 0x0409 [ 0.548908] usb usb4: udev 1, busnum 4, minor = 384 [ 0.548910] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.548952] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.549006] usb usb4: Product: xHCI Host Controller [ 0.549044] usb usb4: Manufacturer: Linux 3.11.0-rc5-next20130813-3-iniza-small xhci_hcd [ 0.549099] usb usb4: SerialNumber: 0000:03:00.0 [ 0.549255] usb usb4: usb_probe_device [ 0.549258] usb usb4: configuration #1 chosen from 1 choice [ 0.549264] xHCI xhci_add_endpoint called for root hub [ 0.549265] xHCI xhci_check_bandwidth called for root hub [ 0.549276] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.549307] hub 4-0:1.0: usb_probe_interface [ 0.549309] hub 4-0:1.0: usb_probe_interface - got id [ 0.549312] hub 4-0:1.0: USB hub found [ 0.549360] hub 4-0:1.0: 2 ports detected [ 0.549397] hub 4-0:1.0: standalone hub [ 0.549398] hub 4-0:1.0: no power switching (usb 1.0) [ 0.549400] hub 4-0:1.0: individual port over-current protection [ 0.549401] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.549403] hub 4-0:1.0: power on to power good time: 20ms [ 0.549414] hub 4-0:1.0: local power source is good [ 0.549450] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.560718] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.567237] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.567280] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.567571] mousedev: PS/2 mouse device common for all mice [ 0.568132] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.568206] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.568331] device-mapper: uevent: version 1.0.3 [ 0.568477] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx [ 0.568558] Intel P-state driver initializing. [ 0.568626] Intel pstate controlling: cpu 0 [ 0.568707] Intel pstate controlling: cpu 1 [ 0.568772] Intel pstate controlling: cpu 2 [ 0.568836] Intel pstate controlling: cpu 3 [ 0.568945] ledtrig-cpu: registered to indicate activity on CPUs [ 0.569367] ashmem: initialized [ 0.569615] TCP: cubic registered [ 0.569953] NET: Registered protocol family 10 [ 0.570536] NET: Registered protocol family 17 [ 0.570596] Key type dns_resolver registered [ 0.571188] PM: Hibernation image not present or could not be loaded. [ 0.571199] Loading module verification certificates [ 0.572610] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: bdb76b55597352b33ff9a04bd156328236767312' [ 0.572714] registered taskstats version 1 [ 0.576215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.577370] Key type trusted registered [ 0.585293] Key type encrypted registered [ 0.592971] rtc_cmos 00:05: setting system clock to 2013-08-13 20:38:20 UTC (1376426300) [ 0.593710] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.593773] EDD information not available. [ 0.620713] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.620753] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.636684] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.636715] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.648737] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.648763] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.648793] hub 3-0:1.0: hub_suspend [ 0.648819] usb usb3: bus auto-suspend, wakeup 1 [ 0.648885] hub 4-0:1.0: hub_suspend [ 0.648897] usb usb4: bus auto-suspend, wakeup 1 [ 0.657392] usb usb4: usb wakeup-resume [ 0.657406] usb usb4: usb auto-resume [ 0.668671] hub 4-0:1.0: hub_resume [ 0.668717] hub 4-0:1.0: port 1: status 0203 change 0001 [ 0.720647] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.720749] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.776820] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.776834] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.820550] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.821805] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.821879] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.823335] ata1.00: configured for UDMA/133 [ 0.823858] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.824516] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.824568] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.824672] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.825258] sd 0:0:0:0: [sda] Write Protect is off [ 0.825330] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.825571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.832504] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.841018] sda: sda1 sda2 sda3 [ 0.842755] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.888740] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.888753] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.965169] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.965179] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.965249] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.965650] usb 1-1: usb_probe_device [ 0.965659] usb 1-1: configuration #1 chosen from 1 choice [ 0.965929] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.966013] hub 1-1:1.0: usb_probe_interface [ 0.966018] hub 1-1:1.0: usb_probe_interface - got id [ 0.966026] hub 1-1:1.0: USB hub found [ 0.966274] hub 1-1:1.0: 6 ports detected [ 0.966341] hub 1-1:1.0: standalone hub [ 0.966345] hub 1-1:1.0: individual port power switching [ 0.966348] hub 1-1:1.0: individual port over-current protection [ 0.966351] hub 1-1:1.0: Single TT [ 0.966355] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.966359] hub 1-1:1.0: power on to power good time: 100ms [ 0.966654] hub 1-1:1.0: local power source is good [ 0.967132] hub 1-1:1.0: enabling power on all ports [ 0.968401] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.968496] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.024641] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.024654] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.064844] hub 1-1:1.0: port 2: status 0101 change 0001 [ 1.065609] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.080383] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.136564] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.136580] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.144321] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.145203] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.145282] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.146045] ata2.00: configured for UDMA/133 [ 1.146608] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.147102] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.147202] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.147554] sd 1:0:0:0: [sdb] Write Protect is off [ 1.147622] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.147680] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.149023] sdb: sdb1 sdb2 [ 1.150078] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.164294] usb 1-1: link qh256-0001/ffff880037a93740 start 1 [1/0 us] [ 1.212991] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.213001] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.213072] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.213453] usb 2-1: usb_probe_device [ 1.213462] usb 2-1: configuration #1 chosen from 1 choice [ 1.213773] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.213851] hub 2-1:1.0: usb_probe_interface [ 1.213856] hub 2-1:1.0: usb_probe_interface - got id [ 1.213863] hub 2-1:1.0: USB hub found [ 1.214088] hub 2-1:1.0: 6 ports detected [ 1.214155] hub 2-1:1.0: standalone hub [ 1.214159] hub 2-1:1.0: individual port power switching [ 1.214162] hub 2-1:1.0: individual port over-current protection [ 1.214165] hub 2-1:1.0: Single TT [ 1.214169] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.214173] hub 2-1:1.0: power on to power good time: 100ms [ 1.214619] hub 2-1:1.0: local power source is good [ 1.215225] hub 2-1:1.0: enabling power on all ports [ 1.216350] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.216382] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 1.317415] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.331813] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.344762] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.345203] usb 4-1: skipped 1 descriptor after endpoint [ 1.345211] usb 4-1: skipped 1 descriptor after endpoint [ 1.345345] usb 4-1: default language 0x0409 [ 1.345676] usb 4-1: udev 2, busnum 4, minor = 385 [ 1.345692] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.345761] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.345829] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.345892] usb 4-1: Manufacturer: MEDION [ 1.345951] usb 4-1: SerialNumber: 3180000000000000092C [ 1.346287] usb 4-1: usb_probe_device [ 1.346292] usb 4-1: configuration #1 chosen from 1 choice [ 1.347298] usb 4-1: Successful Endpoint Configure command [ 1.347392] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 1.347584] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000 [ 1.347699] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.404121] tsc: Refined TSC clocksource calibration: 1596.374 MHz [ 1.416160] usb 2-1: link qh256-0001/ffff880037a93440 start 1 [1/0 us] [ 1.416342] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.464092] ata4: SATA link down (SStatus 0 SControl 300) [ 1.511548] usb 1-1.2: skipped 1 descriptor after interface [ 1.512026] usb 1-1.2: default language 0x0409 [ 1.514577] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 1.514589] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.514666] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.514754] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.514820] usb 1-1.2: Manufacturer: Logitech [ 1.515250] usb 1-1.2: usb_probe_device [ 1.515261] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.515810] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 1.516267] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.588262] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.783905] ata5: SATA link down (SStatus 0 SControl 300) [ 1.786259] Freeing unused kernel memory: 1332K (ffffffff81d07000 - ffffffff81e54000) [ 1.786337] Write protecting the kernel read-only data: 12288k [ 1.790982] Freeing unused kernel memory: 1044K (ffff8800016fb000 - ffff880001800000) [ 1.794924] Freeing unused kernel memory: 956K (ffff880001b11000 - ffff880001c00000) [ 1.829730] usb 1-1.4: skipped 1 descriptor after configuration [ 1.829738] usb 1-1.4: skipped 5 descriptors after interface [ 1.829745] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.829749] usb 1-1.4: skipped 23 descriptors after interface [ 1.829985] udevd[121]: starting version 175 [ 1.831849] usb 1-1.4: default language 0x0409 [ 1.843955] usb 1-1.4: udev 4, busnum 1, minor = 3 [ 1.843963] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.844015] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.844079] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.844124] usb 1-1.4: Manufacturer: 123 [ 1.844354] usb 1-1.4: usb_probe_device [ 1.844360] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.844445] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.980314] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.980400] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.981344] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.982886] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 1.982955] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.988986] usb-storage 4-1:1.0: usb_probe_interface [ 1.988995] usb-storage 4-1:1.0: usb_probe_interface - got id [ 1.989002] usb-storage 4-1:1.0: USB Mass Storage device detected [ 1.989199] scsi6 : usb-storage 4-1:1.0 [ 1.989542] usbcore: registered new interface driver usb-storage [ 2.016541] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 2.016673] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 2.016828] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.033305] hidraw: raw HID events driver (C) Jiri Kosina [ 2.036353] usbhid 1-1.2:1.0: usb_probe_interface [ 2.036360] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 2.040312] usbcore: registered new interface driver usbhid [ 2.040357] usbhid: USB HID core driver [ 2.050534] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 2.050928] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.087908] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.184240] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.184250] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.184326] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.184763] usb 2-1.5: usb_probe_device [ 2.184770] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.185360] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.185858] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.186682] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010 [ 2.186854] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.403560] Switched to clocksource tsc [ 2.792894] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 2.987679] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 2.988336] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.988566] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.989117] sd 6:0:0:0: [sdc] Write Protect is off [ 2.989179] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.989691] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.991663] sdc: sdc1 sdc2 sdc3 [ 2.993395] sd 6:0:0:0: [sdc] Attached SCSI disk [ 25.964075] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 25.988202] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 26.008329] udevd[621]: starting version 175 [ 26.238757] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 26.238770] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.238777] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 26.238782] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.238785] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 26.238789] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.238791] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 26.238795] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.238797] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 26.329716] lp: driver loaded but no devices found [ 26.356070] wmi: Mapper loaded [ 26.401905] cfg80211: Calling CRDA to update world regulatory domain [ 26.523828] cfg80211: World regulatory domain updated: [ 26.523830] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.523831] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.523832] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.523833] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.523833] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.523834] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.752879] samsung_laptop: detected SABI interface: SwSmi@ [ 26.752885] samsung_laptop: Backlight controlled by ACPI video driver [ 26.760394] type=1400 audit(1376419126.683:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=787 comm="apparmor_parser" [ 26.761546] type=1400 audit(1376419126.683:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=787 comm="apparmor_parser" [ 26.762278] type=1400 audit(1376419126.683:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=787 comm="apparmor_parser" [ 26.772077] Bluetooth: Core ver 2.16 [ 26.772122] NET: Registered protocol family 31 [ 26.772125] Bluetooth: HCI device and connection manager initialized [ 26.772143] Bluetooth: HCI socket layer initialized [ 26.772156] Bluetooth: L2CAP socket layer initialized [ 26.772186] Bluetooth: SCO socket layer initialized [ 26.787745] [drm] Initialized drm 1.1.0 20060810 [ 26.804024] Linux video capture interface: v2.00 [ 26.883320] btusb 2-1.5:1.0: usb_probe_interface [ 26.883327] btusb 2-1.5:1.0: usb_probe_interface - got id [ 26.888992] usbcore: registered new interface driver btusb [ 26.889493] usb 2-1.5: link qh1-0e01/ffff880117ecfcc0 start 0 [1/2 us] [ 26.900603] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 26.900607] Copyright(c) 2003-2013 Intel Corporation [ 26.900853] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 26.901142] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 26.911084] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.911089] Bluetooth: BNEP filters: protocol multicast [ 26.911107] Bluetooth: BNEP socket layer initialized [ 26.928904] ppdev: user-space parallel port driver [ 26.955517] Bluetooth: RFCOMM TTY layer initialized [ 26.955544] Bluetooth: RFCOMM socket layer initialized [ 26.955546] Bluetooth: RFCOMM ver 1.11 [ 26.970631] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 27.262114] init: failsafe main process (981) killed by TERM signal [ 27.533351] type=1400 audit(1376419127.451:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1148 comm="apparmor_parser" [ 27.534171] type=1400 audit(1376419127.455:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1148 comm="apparmor_parser" [ 27.534684] type=1400 audit(1376419127.455:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1148 comm="apparmor_parser" [ 27.673742] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 27.688817] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 27.763399] type=1400 audit(1376419127.683:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1152 comm="apparmor_parser" [ 27.763613] type=1400 audit(1376419127.683:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1118 comm="apparmor_parser" [ 27.764720] type=1400 audit(1376419127.683:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1152 comm="apparmor_parser" [ 27.764830] type=1400 audit(1376419127.683:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1118 comm="apparmor_parser" [ 27.766011] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 27.846776] uvcvideo 1-1.4:1.0: usb_probe_interface [ 27.846783] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 27.846821] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 27.866160] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6 [ 27.866300] usbcore: registered new interface driver uvcvideo [ 27.866302] USB Video Class driver (1.1.1) [ 27.869039] usb 1-1.4: link qh16-0001/ffff88007a365a40 start 2 [1/0 us] [ 27.869096] usb 1-1.4: unlink qh16-0001/ffff88007a365a40 start 2 [1/0 us] [ 27.985074] [drm] Memory usable by graphics device = 2048M [ 27.985087] i915 0000:00:02.0: setting latency timer to 64 [ 28.029140] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 28.029171] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 28.029178] [drm] Driver supports precise vblank timestamp query. [ 28.029378] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 28.040637] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 28.040641] [drm] This can cause pipe underruns and display issues. [ 28.040643] [drm] Please upgrade your BIOS to fix this. [ 28.055394] fbcon: inteldrmfb (fb0) is primary device [ 28.338774] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 28.338776] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 28.338777] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 28.338780] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 28.338884] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.386632] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 28.406305] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.412929] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 28.685729] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 28.692355] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 28.770627] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.087650] Console: switching to colour frame buffer device 170x48 [ 29.090598] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 29.090599] i915 0000:00:02.0: registered panic notifier [ 29.109297] acpi device:33: registered as cooling_device9 [ 29.109812] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 29.110181] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 29.114197] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 29.114654] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 29.175655] init: alsa-restore main process (1226) terminated with status 19 [ 29.181548] usb 1-1.2: link qh8-0e01/ffff880119bb9740 start 3 [1/2 us] [ 29.200761] usb 1-1.2: unlink qh8-0e01/ffff880119bb9740 start 3 [1/2 us] [ 29.203892] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 29.204241] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 29.207230] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 29.448232] ehci-pci 0000:00:1a.0: reused qh ffff880119bb9740 schedule [ 29.448239] usb 1-1.2: link qh8-0e01/ffff880119bb9740 start 3 [1/2 us] [ 29.768299] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 29.868050] usb 1-1.4: usb auto-suspend, wakeup 0 [ 30.143085] init: plymouth-stop pre-start process (1513) terminated with status 1 [ 30.928571] usb usb3: usb auto-resume [ 30.928591] hub 3-0:1.0: hub_resume [ 30.928626] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.928652] hub 3-0:1.0: hub_suspend [ 30.928668] usb usb3: bus auto-suspend, wakeup 1 [ 30.928721] usb usb3: usb auto-resume [ 30.939146] hub 3-0:1.0: hub_resume [ 30.939213] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.939222] hub 3-0:1.0: hub_suspend [ 30.939264] usb usb3: bus auto-suspend, wakeup 1 [ 30.939765] usb 1-1.4: usb auto-resume [ 30.987487] usb 1-1.4: finish resume [ 30.995615] usb usb3: usb auto-resume [ 30.995640] hub 3-0:1.0: hub_resume [ 30.995737] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.995768] hub 3-0:1.0: hub_suspend [ 30.995802] usb usb3: bus auto-suspend, wakeup 1 [ 30.996911] usb usb3: usb auto-resume [ 31.007172] hub 3-0:1.0: hub_resume [ 31.007230] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.007271] hub 3-0:1.0: hub_suspend [ 31.007329] usb usb3: bus auto-suspend, wakeup 1 [ 31.007450] usb usb3: usb auto-resume [ 31.019133] hub 3-0:1.0: hub_resume [ 31.019220] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.019255] hub 3-0:1.0: hub_suspend [ 31.019274] usb usb3: bus auto-suspend, wakeup 1 [ 31.033077] usb usb3: usb auto-resume [ 31.033120] hub 3-0:1.0: hub_resume [ 31.033165] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.033200] hub 3-0:1.0: hub_suspend [ 31.033218] usb usb3: bus auto-suspend, wakeup 1 [ 31.033326] usb usb3: usb auto-resume [ 31.043078] hub 3-0:1.0: hub_resume [ 31.043114] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.043127] hub 3-0:1.0: hub_suspend [ 31.043144] usb usb3: bus auto-suspend, wakeup 1 [ 31.056438] usb usb3: usb auto-resume [ 31.056460] hub 3-0:1.0: hub_resume [ 31.056506] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.056528] hub 3-0:1.0: hub_suspend [ 31.056545] usb usb3: bus auto-suspend, wakeup 1 [ 31.056611] usb usb3: usb auto-resume [ 31.071054] hub 3-0:1.0: hub_resume [ 31.071108] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.071132] hub 3-0:1.0: hub_suspend [ 31.071149] usb usb3: bus auto-suspend, wakeup 1 [ 31.075318] usb usb3: usb auto-resume [ 31.087050] hub 3-0:1.0: hub_resume [ 31.087162] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.087182] hub 3-0:1.0: hub_suspend [ 31.087199] usb usb3: bus auto-suspend, wakeup 1 [ 31.087285] usb usb3: usb auto-resume [ 31.099028] hub 3-0:1.0: hub_resume [ 31.099084] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.099096] hub 3-0:1.0: hub_suspend [ 31.099112] usb usb3: bus auto-suspend, wakeup 1 [ 31.100777] usb usb3: usb auto-resume [ 31.111027] hub 3-0:1.0: hub_resume [ 31.111139] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.111169] hub 3-0:1.0: hub_suspend [ 31.111185] usb usb3: bus auto-suspend, wakeup 1 [ 31.111269] usb usb3: usb auto-resume [ 31.123011] hub 3-0:1.0: hub_resume [ 31.123060] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.123082] hub 3-0:1.0: hub_suspend [ 31.123097] usb usb3: bus auto-suspend, wakeup 1 [ 31.130202] usb usb3: usb auto-resume [ 31.138991] hub 3-0:1.0: hub_resume [ 31.139041] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.139069] hub 3-0:1.0: hub_suspend [ 31.139084] usb usb3: bus auto-suspend, wakeup 1 [ 31.139146] usb usb3: usb auto-resume [ 31.151130] hub 3-0:1.0: hub_resume [ 31.151165] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.151176] hub 3-0:1.0: hub_suspend [ 31.151192] usb usb3: bus auto-suspend, wakeup 1 [ 31.152599] usb usb3: usb auto-resume [ 31.162976] hub 3-0:1.0: hub_resume [ 31.163036] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.163053] hub 3-0:1.0: hub_suspend [ 31.163071] usb usb3: bus auto-suspend, wakeup 1 [ 31.163137] usb usb3: usb auto-resume [ 31.174997] hub 3-0:1.0: hub_resume [ 31.175079] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.175088] hub 3-0:1.0: hub_suspend [ 31.175102] usb usb3: bus auto-suspend, wakeup 1 [ 31.177090] usb usb3: usb auto-resume [ 31.186993] hub 3-0:1.0: hub_resume [ 31.187126] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.187138] hub 3-0:1.0: hub_suspend [ 31.187151] usb usb3: bus auto-suspend, wakeup 1 [ 31.188853] usb usb3: usb auto-resume [ 31.198945] hub 3-0:1.0: hub_resume [ 31.200089] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.200104] hub 3-0:1.0: hub_suspend [ 31.200119] usb usb3: bus auto-suspend, wakeup 1 [ 32.203516] usb usb3: usb auto-resume [ 32.203539] hub 3-0:1.0: hub_resume [ 32.203617] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.203650] hub 3-0:1.0: hub_suspend [ 32.203673] usb usb3: bus auto-suspend, wakeup 1 [ 32.205940] usb usb3: usb auto-resume [ 32.214270] hub 3-0:1.0: hub_resume [ 32.214353] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.214400] hub 3-0:1.0: hub_suspend [ 32.214467] usb usb3: bus auto-suspend, wakeup 1 [ 32.214547] usb usb3: usb auto-resume [ 32.226268] hub 3-0:1.0: hub_resume [ 32.226395] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.226416] hub 3-0:1.0: hub_suspend [ 32.226435] usb usb3: bus auto-suspend, wakeup 1 [ 32.227695] usb usb3: usb auto-resume [ 32.238298] hub 3-0:1.0: hub_resume [ 32.238343] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.238379] hub 3-0:1.0: hub_suspend [ 32.238433] usb usb3: bus auto-suspend, wakeup 1 [ 32.238536] usb usb3: usb auto-resume [ 32.250254] hub 3-0:1.0: hub_resume [ 32.250398] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.250421] hub 3-0:1.0: hub_suspend [ 32.250441] usb usb3: bus auto-suspend, wakeup 1 [ 32.262869] usb usb3: usb auto-resume [ 32.262889] hub 3-0:1.0: hub_resume [ 32.262937] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.262965] hub 3-0:1.0: hub_suspend [ 32.263035] usb usb3: bus auto-suspend, wakeup 1 [ 32.263152] usb usb3: usb auto-resume [ 32.274230] hub 3-0:1.0: hub_resume [ 32.274298] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.274319] hub 3-0:1.0: hub_suspend [ 32.274336] usb usb3: bus auto-suspend, wakeup 1 [ 32.275913] usb usb3: usb auto-resume [ 32.286244] hub 3-0:1.0: hub_resume [ 32.286296] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.286336] hub 3-0:1.0: hub_suspend [ 32.286411] usb usb3: bus auto-suspend, wakeup 1 [ 32.286525] usb usb3: usb auto-resume [ 32.298217] hub 3-0:1.0: hub_resume [ 32.298390] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.298415] hub 3-0:1.0: hub_suspend [ 32.298439] usb usb3: bus auto-suspend, wakeup 1 [ 32.300229] usb usb3: usb auto-resume [ 32.310267] hub 3-0:1.0: hub_resume [ 32.310439] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.310462] hub 3-0:1.0: hub_suspend [ 32.310533] usb usb3: bus auto-suspend, wakeup 1 [ 32.310662] usb usb3: usb auto-resume [ 32.322202] hub 3-0:1.0: hub_resume [ 32.322359] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.322384] hub 3-0:1.0: hub_suspend [ 32.322408] usb usb3: bus auto-suspend, wakeup 1 [ 32.324173] usb usb3: usb auto-resume [ 32.334247] hub 3-0:1.0: hub_resume [ 32.334377] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.334403] hub 3-0:1.0: hub_suspend [ 32.334424] usb usb3: bus auto-suspend, wakeup 1 [ 32.334454] usb usb3: usb auto-resume [ 32.346209] hub 3-0:1.0: hub_resume [ 32.346324] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.346353] hub 3-0:1.0: hub_suspend [ 32.346376] usb usb3: bus auto-suspend, wakeup 1 [ 32.351243] usb usb3: usb auto-resume [ 32.362238] hub 3-0:1.0: hub_resume [ 32.362314] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.362354] hub 3-0:1.0: hub_suspend [ 32.362440] usb usb3: bus auto-suspend, wakeup 1 [ 32.362551] usb usb3: usb auto-resume [ 32.374207] hub 3-0:1.0: hub_resume [ 32.374330] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.374357] hub 3-0:1.0: hub_suspend [ 32.374378] usb usb3: bus auto-suspend, wakeup 1 [ 32.380029] usb usb3: usb auto-resume [ 32.390186] hub 3-0:1.0: hub_resume [ 32.390286] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.390314] hub 3-0:1.0: hub_suspend [ 32.390335] usb usb3: bus auto-suspend, wakeup 1 [ 32.390369] usb usb3: usb auto-resume [ 32.402202] hub 3-0:1.0: hub_resume [ 32.402334] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.402364] hub 3-0:1.0: hub_suspend [ 32.402387] usb usb3: bus auto-suspend, wakeup 1 [ 32.403742] usb usb3: usb auto-resume [ 32.414184] hub 3-0:1.0: hub_resume [ 32.414333] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.414361] hub 3-0:1.0: hub_suspend [ 32.414381] usb usb3: bus auto-suspend, wakeup 1 [ 32.414411] usb usb3: usb auto-resume [ 32.426163] hub 3-0:1.0: hub_resume [ 32.426292] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.426319] hub 3-0:1.0: hub_suspend [ 32.426341] usb usb3: bus auto-suspend, wakeup 1 [ 32.433163] usb usb3: usb auto-resume [ 32.442183] hub 3-0:1.0: hub_resume [ 32.442251] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.442321] hub 3-0:1.0: hub_suspend [ 32.442385] usb usb3: bus auto-suspend, wakeup 1 [ 32.442500] usb usb3: usb auto-resume [ 32.454165] hub 3-0:1.0: hub_resume [ 32.454309] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.454337] hub 3-0:1.0: hub_suspend [ 32.454358] usb usb3: bus auto-suspend, wakeup 1 [ 32.456112] usb usb3: usb auto-resume [ 32.466078] hub 3-0:1.0: hub_resume [ 32.466138] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.466183] hub 3-0:1.0: hub_suspend [ 32.466211] usb usb3: bus auto-suspend, wakeup 1 [ 32.466313] usb usb3: usb auto-resume [ 32.478068] hub 3-0:1.0: hub_resume [ 32.478126] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.478159] hub 3-0:1.0: hub_suspend [ 32.478182] usb usb3: bus auto-suspend, wakeup 1 [ 32.479917] usb usb3: usb auto-resume [ 32.490079] hub 3-0:1.0: hub_resume [ 32.490162] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.490187] hub 3-0:1.0: hub_suspend [ 32.490206] usb usb3: bus auto-suspend, wakeup 1 [ 32.490249] usb usb3: usb auto-resume [ 32.502112] hub 3-0:1.0: hub_resume [ 32.502224] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.502250] hub 3-0:1.0: hub_suspend [ 32.502273] usb usb3: bus auto-suspend, wakeup 1 [ 32.504061] usb usb3: usb auto-resume [ 32.514108] hub 3-0:1.0: hub_resume [ 32.514212] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.514240] hub 3-0:1.0: hub_suspend [ 32.514262] usb usb3: bus auto-suspend, wakeup 1 [ 32.514289] usb usb3: usb auto-resume [ 32.526092] hub 3-0:1.0: hub_resume [ 32.526215] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.526242] hub 3-0:1.0: hub_suspend [ 32.526264] usb usb3: bus auto-suspend, wakeup 1 [ 32.528192] usb usb3: usb auto-resume [ 32.538082] hub 3-0:1.0: hub_resume [ 32.538189] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.538216] hub 3-0:1.0: hub_suspend [ 32.538238] usb usb3: bus auto-suspend, wakeup 1 [ 32.538268] usb usb3: usb auto-resume [ 32.550074] hub 3-0:1.0: hub_resume [ 32.550198] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.550225] hub 3-0:1.0: hub_suspend [ 32.550246] usb usb3: bus auto-suspend, wakeup 1 [ 32.552906] usb usb3: usb auto-resume [ 32.562051] hub 3-0:1.0: hub_resume [ 32.562160] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.562187] hub 3-0:1.0: hub_suspend [ 32.562209] usb usb3: bus auto-suspend, wakeup 1 [ 32.562239] usb usb3: usb auto-resume [ 32.574027] hub 3-0:1.0: hub_resume [ 32.574148] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.574175] hub 3-0:1.0: hub_suspend [ 32.574197] usb usb3: bus auto-suspend, wakeup 1 [ 32.578362] usb usb3: usb auto-resume [ 32.590085] hub 3-0:1.0: hub_resume [ 32.590155] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.590197] hub 3-0:1.0: hub_suspend [ 32.590261] usb usb3: bus auto-suspend, wakeup 1 [ 32.590395] usb usb3: usb auto-resume [ 32.602048] hub 3-0:1.0: hub_resume [ 32.602162] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.602200] hub 3-0:1.0: hub_suspend [ 32.602222] usb usb3: bus auto-suspend, wakeup 1 [ 32.604078] usb usb3: usb auto-resume [ 32.614112] hub 3-0:1.0: hub_resume [ 32.614182] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.614238] hub 3-0:1.0: hub_suspend [ 32.614303] usb usb3: bus auto-suspend, wakeup 1 [ 32.614421] usb usb3: usb auto-resume [ 32.626047] hub 3-0:1.0: hub_resume [ 32.626197] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.626224] hub 3-0:1.0: hub_suspend [ 32.626245] usb usb3: bus auto-suspend, wakeup 1 [ 32.628421] usb usb3: usb auto-resume [ 32.638015] hub 3-0:1.0: hub_resume [ 32.638120] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.638147] hub 3-0:1.0: hub_suspend [ 32.638169] usb usb3: bus auto-suspend, wakeup 1 [ 32.638200] usb usb3: usb auto-resume [ 32.650019] hub 3-0:1.0: hub_resume [ 32.650132] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.650167] hub 3-0:1.0: hub_suspend [ 32.650188] usb usb3: bus auto-suspend, wakeup 1 [ 32.652267] usb usb3: usb auto-resume [ 32.661994] hub 3-0:1.0: hub_resume [ 32.662111] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.662136] hub 3-0:1.0: hub_suspend [ 32.662157] usb usb3: bus auto-suspend, wakeup 1 [ 32.662187] usb usb3: usb auto-resume [ 32.673989] hub 3-0:1.0: hub_resume [ 32.674110] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.674145] hub 3-0:1.0: hub_suspend [ 32.674165] usb usb3: bus auto-suspend, wakeup 1 [ 32.676862] usb usb3: usb auto-resume [ 32.685979] hub 3-0:1.0: hub_resume [ 32.686092] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.686118] hub 3-0:1.0: hub_suspend [ 32.686138] usb usb3: bus auto-suspend, wakeup 1 [ 32.686165] usb usb3: usb auto-resume [ 32.697940] hub 3-0:1.0: hub_resume [ 32.698049] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.698079] hub 3-0:1.0: hub_suspend [ 32.698102] usb usb3: bus auto-suspend, wakeup 1 [ 33.701412] usb usb3: usb auto-resume [ 33.701436] hub 3-0:1.0: hub_resume [ 33.701671] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.701706] hub 3-0:1.0: hub_suspend [ 33.701725] usb usb3: bus auto-suspend, wakeup 1 [ 33.701769] usb usb3: usb auto-resume [ 33.713236] hub 3-0:1.0: hub_resume [ 33.713474] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.713510] hub 3-0:1.0: hub_suspend [ 33.713530] usb usb3: bus auto-suspend, wakeup 1 [ 33.717596] usb usb3: usb auto-resume [ 33.729272] hub 3-0:1.0: hub_resume [ 33.729378] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.729427] hub 3-0:1.0: hub_suspend [ 33.729499] usb usb3: bus auto-suspend, wakeup 1 [ 33.729622] usb usb3: usb auto-resume [ 33.741276] hub 3-0:1.0: hub_resume [ 33.741466] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.741501] hub 3-0:1.0: hub_suspend [ 33.741521] usb usb3: bus auto-suspend, wakeup 1 [ 33.746029] usb usb3: usb auto-resume [ 33.757261] hub 3-0:1.0: hub_resume [ 33.757352] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.757402] hub 3-0:1.0: hub_suspend [ 33.757465] usb usb3: bus auto-suspend, wakeup 1 [ 33.757584] usb usb3: usb auto-resume [ 33.769241] hub 3-0:1.0: hub_resume [ 33.769352] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.769388] hub 3-0:1.0: hub_suspend [ 33.769408] usb usb3: bus auto-suspend, wakeup 1 [ 33.771192] usb usb3: usb auto-resume [ 33.781289] hub 3-0:1.0: hub_resume [ 33.781412] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.781447] hub 3-0:1.0: hub_suspend [ 33.781467] usb usb3: bus auto-suspend, wakeup 1 [ 33.781505] usb usb3: usb auto-resume [ 33.793215] hub 3-0:1.0: hub_resume [ 33.793335] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.793370] hub 3-0:1.0: hub_suspend [ 33.793390] usb usb3: bus auto-suspend, wakeup 1 [ 33.796445] usb usb3: usb auto-resume [ 33.805212] hub 3-0:1.0: hub_resume [ 33.805324] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.805350] hub 3-0:1.0: hub_suspend [ 33.805371] usb usb3: bus auto-suspend, wakeup 1 [ 33.805398] usb usb3: usb auto-resume [ 33.817204] hub 3-0:1.0: hub_resume [ 33.817326] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.817354] hub 3-0:1.0: hub_suspend [ 33.817375] usb usb3: bus auto-suspend, wakeup 1 [ 33.823004] usb usb3: usb auto-resume [ 33.833171] hub 3-0:1.0: hub_resume [ 33.833285] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.833311] hub 3-0:1.0: hub_suspend [ 33.833332] usb usb3: bus auto-suspend, wakeup 1 [ 33.833363] usb usb3: usb auto-resume [ 33.845128] hub 3-0:1.0: hub_resume [ 33.845255] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.845283] hub 3-0:1.0: hub_suspend [ 33.845305] usb usb3: bus auto-suspend, wakeup 1 [ 33.849901] usb usb3: usb auto-resume [ 33.861152] hub 3-0:1.0: hub_resume [ 33.861266] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.861292] hub 3-0:1.0: hub_suspend [ 33.861316] usb usb3: bus auto-suspend, wakeup 1 [ 33.861362] usb usb3: usb auto-resume [ 33.873144] hub 3-0:1.0: hub_resume [ 33.873252] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.873281] hub 3-0:1.0: hub_suspend [ 33.873303] usb usb3: bus auto-suspend, wakeup 1 [ 33.922134] usb usb3: usb auto-resume [ 33.922156] hub 3-0:1.0: hub_resume [ 33.922199] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.922210] hub 3-0:1.0: hub_suspend [ 33.922266] usb usb3: bus auto-suspend, wakeup 1 [ 33.922343] usb usb3: usb auto-resume [ 33.933103] hub 3-0:1.0: hub_resume [ 33.933159] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.933185] hub 3-0:1.0: hub_suspend [ 33.933211] usb usb3: bus auto-suspend, wakeup 1 [ 34.965942] wlan0: authenticate with 00:04:0e:e4:00:3d [ 34.969410] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 34.971108] wlan0: authenticated [ 34.971300] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 34.971307] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 34.971313] wlan0: waiting for beacon from 00:04:0e:e4:00:3d [ 34.984276] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 34.987819] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 34.993217] wlan0: associated [ 34.993343] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 35.931694] usb 1-1.4: usb auto-suspend, wakeup 0 [ 37.246160] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 37.292580] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
_______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
