Starting from ICL, the default for MIPI GPIO sequences seems to be using native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse many pins that quite frankly seem scary to poke based on the VBT sequences. We pretty much have to trust that the board is configured such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for anything else. MIPI sequence v4 also adds a flag to fall back to non-native sequences. v2: - Fix HPD pin output set (impacts GPIOs 0 and 5) - Fix GPIO data output direction set (impacts GPIOs 4 and 9) - Reduce register accesses to single intel_de_rwm() Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6131 Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 84 +++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 1 + 2 files changed, 82 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c index fce69fa446d5..18c6c2153076 100644 --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c @@ -41,9 +41,11 @@ #include "i915_drv.h" #include "i915_reg.h" +#include "intel_de.h" #include "intel_display_types.h" #include "intel_dsi.h" #include "intel_dsi_vbt.h" +#include "intel_gmbus_regs.h" #include "vlv_dsi.h" #include "vlv_dsi_regs.h" #include "vlv_sideband.h" @@ -377,6 +379,75 @@ static void icl_exec_gpio(struct intel_connector *connector, drm_dbg_kms(&dev_priv->drm, "Skipping ICL GPIO element execution\n"); } +enum { + MIPI_RESET_1 = 0, + MIPI_AVDD_EN_1, + MIPI_BKLT_EN_1, + MIPI_AVEE_EN_1, + MIPI_VIO_EN_1, + MIPI_RESET_2, + MIPI_AVDD_EN_2, + MIPI_BKLT_EN_2, + MIPI_AVEE_EN_2, + MIPI_VIO_EN_2, +}; + +static void icl_native_gpio_set_value(struct drm_i915_private *dev_priv, + int gpio, bool value) +{ + int index; + + if (drm_WARN_ON(&dev_priv->drm, DISPLAY_VER(dev_priv) == 11 && gpio >= MIPI_RESET_2)) + return; + + switch (gpio) { + case MIPI_RESET_1: + case MIPI_RESET_2: + index = gpio == MIPI_RESET_1 ? HPD_PORT_A : HPD_PORT_B; + + /* Disable HPD to set the pin to output, and set output value */ + intel_de_rmw(dev_priv, SHOTPLUG_CTL_DDI, + SHOTPLUG_CTL_DDI_HPD_ENABLE(index) | + SHOTPLUG_CTL_DDI_HPD_OUTPUT_DATA(index), + value ? SHOTPLUG_CTL_DDI_HPD_OUTPUT_DATA(index) : 0); + break; + case MIPI_AVDD_EN_1: + case MIPI_AVDD_EN_2: + index = gpio == MIPI_AVDD_EN_1 ? 0 : 1; + + intel_de_rmw(dev_priv, PP_CONTROL(index), PANEL_POWER_ON, + value ? PANEL_POWER_ON : 0); + break; + case MIPI_BKLT_EN_1: + case MIPI_BKLT_EN_2: + index = gpio == MIPI_AVDD_EN_1 ? 0 : 1; + + intel_de_rmw(dev_priv, PP_CONTROL(index), EDP_BLC_ENABLE, + value ? EDP_BLC_ENABLE : 0); + break; + case MIPI_AVEE_EN_1: + case MIPI_AVEE_EN_2: + index = gpio == MIPI_AVEE_EN_1 ? 1 : 2; + + intel_de_rmw(dev_priv, GPIO(dev_priv, index), + GPIO_CLOCK_VAL_OUT, + GPIO_CLOCK_DIR_MASK | GPIO_CLOCK_DIR_OUT | + GPIO_CLOCK_VAL_MASK | value ? GPIO_CLOCK_VAL_OUT : 0); + break; + case MIPI_VIO_EN_1: + case MIPI_VIO_EN_2: + index = gpio == MIPI_VIO_EN_1 ? 1 : 2; + + intel_de_rmw(dev_priv, GPIO(dev_priv, index), + GPIO_DATA_VAL_OUT, + GPIO_DATA_DIR_MASK | GPIO_DATA_DIR_OUT | + GPIO_DATA_VAL_MASK | value ? GPIO_DATA_VAL_OUT : 0); + break; + default: + MISSING_CASE(gpio); + } +} + static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data) { struct drm_device *dev = intel_dsi->base.base.dev; @@ -384,8 +455,7 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data) struct intel_connector *connector = intel_dsi->attached_connector; u8 gpio_source, gpio_index = 0, gpio_number; bool value; - - drm_dbg_kms(&dev_priv->drm, "\n"); + bool native = DISPLAY_VER(dev_priv) >= 11; if (connector->panel.vbt.dsi.seq_version >= 3) gpio_index = *data++; @@ -398,10 +468,18 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data) else gpio_source = 0; + if (connector->panel.vbt.dsi.seq_version >= 4 && *data & BIT(1)) + native = false; + /* pull up/down */ value = *data++ & 1; - if (DISPLAY_VER(dev_priv) >= 11) + drm_dbg_kms(&dev_priv->drm, "GPIO index %u, number %u, source %u, native %s, set to %s\n", + gpio_index, gpio_number, gpio_source, str_yes_no(native), str_on_off(value)); + + if (native) + icl_native_gpio_set_value(dev_priv, gpio_number, value); + else if (DISPLAY_VER(dev_priv) >= 11) icl_exec_gpio(connector, gpio_source, gpio_index, value); else if (IS_VALLEYVIEW(dev_priv)) vlv_exec_gpio(connector, gpio_source, gpio_number, value); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2b7a63754e4d..7008d04a06b8 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -5965,6 +5965,7 @@ #define SHOTPLUG_CTL_DDI _MMIO(0xc4030) #define SHOTPLUG_CTL_DDI_HPD_ENABLE(hpd_pin) (0x8 << (_HPD_PIN_DDI(hpd_pin) * 4)) +#define SHOTPLUG_CTL_DDI_HPD_OUTPUT_DATA(hpd_pin) (0x4 << (_HPD_PIN_DDI(hpd_pin) * 4)) #define SHOTPLUG_CTL_DDI_HPD_STATUS_MASK(hpd_pin) (0x3 << (_HPD_PIN_DDI(hpd_pin) * 4)) #define SHOTPLUG_CTL_DDI_HPD_NO_DETECT(hpd_pin) (0x0 << (_HPD_PIN_DDI(hpd_pin) * 4)) #define SHOTPLUG_CTL_DDI_HPD_SHORT_DETECT(hpd_pin) (0x1 << (_HPD_PIN_DDI(hpd_pin) * 4)) -- 2.34.1
