Re: [PATCH 07/11] drm/i915/audio : Consider fractional vdsc bpp while computing tu_data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/5/2022 1:05 PM, Lisovskiy, Stanislav wrote:
On Mon, Nov 28, 2022 at 03:49:18PM +0530, Ankit Nautiyal wrote:
MTL+ supports fractional compressed bits_per_pixel, with precision of
1/16. This compressed bpp is stored in U6.4 format.
Accommodate the precision during calculation of transfer unit data
for hblank_early calculation.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
---
  drivers/gpu/drm/i915/display/intel_audio.c | 12 ++++++------
  1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c
index f63d5824aca2..4797040a6362 100644
--- a/drivers/gpu/drm/i915/display/intel_audio.c
+++ b/drivers/gpu/drm/i915/display/intel_audio.c
@@ -510,14 +510,14 @@ static unsigned int calc_hblank_early_prog(struct intel_encoder *encoder,
  	unsigned int link_clks_available, link_clks_required;
  	unsigned int tu_data, tu_line, link_clks_active;
  	unsigned int h_active, h_total, hblank_delta, pixel_clk;
-	unsigned int fec_coeff, cdclk, vdsc_bpp;
+	unsigned int fec_coeff, cdclk, vdsc_bppx16;
  	unsigned int link_clk, lanes;
  	unsigned int hblank_rise;
h_active = crtc_state->hw.adjusted_mode.crtc_hdisplay;
  	h_total = crtc_state->hw.adjusted_mode.crtc_htotal;
  	pixel_clk = crtc_state->hw.adjusted_mode.crtc_clock;
-	vdsc_bpp = dsc_integral_compressed_bpp(crtc_state->dsc.compressed_bpp);
+	vdsc_bppx16 = crtc_state->dsc.compressed_bpp;
  	cdclk = i915->display.cdclk.hw.cdclk;
  	/* fec= 0.972261, using rounding multiplier of 1000000 */
  	fec_coeff = 972261;
@@ -525,10 +525,10 @@ static unsigned int calc_hblank_early_prog(struct intel_encoder *encoder,
  	lanes = crtc_state->lane_count;
drm_dbg_kms(&i915->drm, "h_active = %u link_clk = %u :"
-		    "lanes = %u vdsc_bpp = %u cdclk = %u\n",
-		    h_active, link_clk, lanes, vdsc_bpp, cdclk);
+		    "lanes = %u vdsc_bppx16 = %u cdclk = %u\n",
+		    h_active, link_clk, lanes, vdsc_bppx16, cdclk);
- if (WARN_ON(!link_clk || !pixel_clk || !lanes || !vdsc_bpp || !cdclk))
+	if (WARN_ON(!link_clk || !pixel_clk || !lanes || !vdsc_bppx16 || !cdclk))
  		return 0;
link_clks_available = (h_total - h_active) * link_clk / pixel_clk - 28;
@@ -540,7 +540,7 @@ static unsigned int calc_hblank_early_prog(struct intel_encoder *encoder,
  		hblank_delta = DIV64_U64_ROUND_UP(mul_u32_u32(5 * (link_clk + cdclk), pixel_clk),
  						  mul_u32_u32(link_clk, cdclk));
- tu_data = div64_u64(mul_u32_u32(pixel_clk * vdsc_bpp * 8, 1000000),
+	tu_data = div64_u64(mul_u32_u32(pixel_clk * vdsc_bppx16 * 8, 16 * 1000000),
I think it should be:

tu_data = div64_u64(mul_u32_u32(pixel_clk * vdsc_bppx16 * 8, 1000000),
                     mul_u32_u32(link_clk * lanes * 16, fec_coeff));

i.e you need to divide by 16 but not multiply, because vdsc_bppx16 already
stores vdsc_bpp multiplied by 16, which is visible from the logs,
during testing it was for example 384 for bpp 24, so no point in multiplying
it once again.

Stan

You are right. This is a mistake. Intention was to multiply the denominator by 16, but I goofed up.

Thanks for catching this. Will fix this in the next version of the patch.


Regards,

Ankit


  			    mul_u32_u32(link_clk * lanes, fec_coeff));
  	tu_line = div64_u64(h_active * mul_u32_u32(link_clk, fec_coeff),
  			    mul_u32_u32(64 * pixel_clk, 1000000));
--
2.25.1




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux