From: Mateusz Kwiatkowski <kfyatek+publicgit@xxxxxxxxx>
The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.
Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.
Acked-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@xxxxxxxxx>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@xxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
Changes in v6:
- Used htotal instead of vtotal to discriminate PAL against NTSC
---
drivers/gpu/drm/vc4/vc4_vec.c | 50 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 90e375a8a8f9..bfa8a58dba30 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -453,6 +453,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
+ const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
const struct vc4_vec_tv_mode *vec_mode;
vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
@@ -461,6 +462,55 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
!drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
return -EINVAL;
+ if (mode->crtc_hdisplay % 4)
+ return -EINVAL;
+
+ if (!(mode->crtc_hsync_end - mode->crtc_hsync_start))
+ return -EINVAL;
+
+ switch (mode->htotal) {
+ /* NTSC */
+ case 858:
+ if (mode->crtc_vtotal > 262)
+ return -EINVAL;
+
+ if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 253)
+ return -EINVAL;
+
+ if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+ return -EINVAL;
+
+ if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+ return -EINVAL;
+
+ if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 4)
+ return -EINVAL;
+
+ break;
+
+ /* PAL/SECAM */
+ case 864:
+ if (mode->crtc_vtotal > 312)
+ return -EINVAL;
+
+ if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 305)
+ return -EINVAL;
+
+ if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+ return -EINVAL;
+
+ if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+ return -EINVAL;
+
+ if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 2)
+ return -EINVAL;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
return 0;
}
--
b4 0.11.0-dev-99e3a
