Re: [PATCH 1/2] drm/i915/gt: Add GT oriented dmesg output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 09.11.2022 18:46, John Harrison wrote:
> On 11/9/2022 03:05, Tvrtko Ursulin wrote:
>> On 08/11/2022 20:15, John Harrison wrote:
>>> On 11/8/2022 01:01, Tvrtko Ursulin wrote:
>>>> On 07/11/2022 19:14, John Harrison wrote:
>>>>> On 11/7/2022 08:17, Tvrtko Ursulin wrote:
>>>>>> On 07/11/2022 09:33, Tvrtko Ursulin wrote:
>>>>>>> On 05/11/2022 01:03, Ceraolo Spurio, Daniele wrote:
>>>>>>>> On 11/4/2022 10:25 AM, John.C.Harrison@xxxxxxxxx wrote:
>>>>>>>>> From: John Harrison <John.C.Harrison@xxxxxxxxx>
>>>>>>>>>
>>>>>>>>> When trying to analyse bug reports from CI, customers, etc. it
>>>>>>>>> can be
>>>>>>>>> difficult to work out exactly what is happening on which GT in a
>>>>>>>>> multi-GT system. So add GT oriented debug/error message
>>>>>>>>> wrappers. If
>>>>>>>>> used instead of the drm_ equivalents, you get the same output
>>>>>>>>> but with
>>>>>>>>> a GT# prefix on it.
>>>>>>>>>
>>>>>>>>> Signed-off-by: John Harrison <John.C.Harrison@xxxxxxxxx>
>>>>>>>>
>>>>>>>> The only downside to this is that we'll print "GT0: " even on
>>>>>>>> single-GT devices. We could introduce a gt->info.name and print
>>>>>>>> that, so we could have it different per-platform, but IMO it's
>>>>>>>> not worth the effort.
>>>>>>>>
>>>>>>>> Reviewed-by: Daniele Ceraolo Spurio
>>>>>>>> <daniele.ceraolospurio@xxxxxxxxx>
>>>>>>>>
>>>>>>>> I think it might be worth getting an ack from one of the
>>>>>>>> maintainers to make sure we're all aligned on transitioning to
>>>>>>>> these new logging macro for gt code.
>>>>>>>
>>>>>>> Idea is I think a very good one. First I would suggest
>>>>>>> standardising to lowercase GT in logs because:
>>>>>>>
>>>>>>> $ grep "GT%" i915/ -r
>>>>>>> $ grep "gt%" i915/ -r
>>>>>>> i915/gt/intel_gt_sysfs.c: gt->i915->sysfs_gt, "gt%d", gt->info.id))
>>>>>>> i915/gt/intel_gt_sysfs.c:                "failed to initialize
>>>>>>> gt%d sysfs root\n", gt->info.id);
>>>>>>> i915/gt/intel_gt_sysfs_pm.c:                     "failed to
>>>>>>> create gt%u RC6 sysfs files (%pe)\n",
>>>>>>> i915/gt/intel_gt_sysfs_pm.c: "failed to create gt%u RC6p sysfs
>>>>>>> files (%pe)\n",
>>>>>>> i915/gt/intel_gt_sysfs_pm.c:                     "failed to
>>>>>>> create gt%u RPS sysfs files (%pe)",
>>>>>>> i915/gt/intel_gt_sysfs_pm.c:                     "failed to
>>>>>>> create gt%u punit_req_freq_mhz sysfs (%pe)",
>>>>>>> i915/gt/intel_gt_sysfs_pm.c: "failed to create gt%u throttle
>>>>>>> sysfs files (%pe)",
>>>>>>> i915/gt/intel_gt_sysfs_pm.c: "failed to create gt%u
>>>>>>> media_perf_power_attrs sysfs (%pe)\n",
>>>>>>> i915/gt/intel_gt_sysfs_pm.c:                     "failed to add
>>>>>>> gt%u rps defaults (%pe)\n",
>>>>>>> i915/i915_driver.c: drm_err(&gt->i915->drm, "gt%d:
>>>>>>> intel_pcode_init failed %d\n", id, ret);
>>>>>>> i915/i915_hwmon.c: snprintf(ddat_gt->name, sizeof(ddat_gt->name),
>>>>>>> "i915_gt%u", i);
>>>>>>>
>>>>>
>>>>> Just because there are 11 existing instances of one form doesn't
>>>>> mean that the 275 instances that are waiting to be converted should
>>>>> be done incorrectly. GT is an acronym and should be capitalised.
>>>>
>>>> Okay just make it consistent then.
>>>>
>>>>> Besides:
>>>>> grep -r "GT " i915 | grep '"'
>>>>> i915/vlv_suspend.c:             drm_err(&i915->drm, "timeout
>>>>> disabling GT waking\n");
>>>>> i915/vlv_suspend.c:                     "timeout waiting for GT
>>>>> wells to go %s\n",
>>>>> i915/vlv_suspend.c:     drm_dbg(&i915->drm, "GT register access
>>>>> while GT waking disabled\n");
>>>>> i915/i915_gpu_error.c:  err_printf(m, "GT awake: %s\n",
>>>>> str_yes_no(gt->awake));
>>>>> i915/i915_debugfs.c:    seq_printf(m, "GT awake? %s [%d], %llums\n",
>>>>> i915/selftests/i915_gem_evict.c: pr_err("Failed to idle GT (on
>>>>> %s)", engine->name);
>>>>> i915/intel_uncore.c:                  "GT thread status wait timed
>>>>> out\n");
>>>>> i915/gt/uc/selftest_guc_multi_lrc.c: drm_err(&gt->i915->drm, "GT
>>>>> failed to idle: %d\n", ret);
>>>>> i915/gt/uc/selftest_guc.c: drm_err(&gt->i915->drm, "GT failed to
>>>>> idle: %d\n", ret);
>>>>> i915/gt/uc/selftest_guc.c: drm_err(&gt->i915->drm, "GT failed to
>>>>> idle: %d\n", ret);
>>>>> i915/gt/intel_gt_mcr.c: * Some GT registers are designed as
>>>>> "multicast" or "replicated" registers:
>>>>> i915/gt/selftest_rps.c:                 pr_info("%s: rps counted %d
>>>>> C0 cycles [%lldns] in %lldns [%d cycles], using GT clock frequency
>>>>> of %uKHz\n",
>>>>> i915/gt/selftest_hangcheck.c:                   pr_err("[%s] GT is
>>>>> wedged!\n", engine->name);
>>>>> i915/gt/selftest_hangcheck.c:           pr_err("GT is wedged!\n");
>>>>> i915/gt/intel_gt_clock_utils.c:                 "GT clock frequency
>>>>> changed, was %uHz, now %uHz!\n",
>>>>> i915/gt/selftest_engine_pm.c:           pr_err("Unable to flush GT
>>>>> pm before test\n");
>>>>> i915/gt/selftest_engine_pm.c: pr_err("GT failed to idle\n");
>>>>> i915/i915_sysfs.c:                       "failed to register GT
>>>>> sysfs directory\n");
>>>>> i915/intel_uncore.h:     * of the basic non-engine GT registers
>>>>> (referred to as "GSI" on
>>>>> i915/intel_uncore.h:     * newer platforms, or "GT block" on older
>>>>> platforms)?  If so, we'll
>>>>>
>>>>>
>>>>>
>>>>>>> Then there is a question of naming. Are we okay with GT_XXX or,
>>>>>>> do we want intel_gt_, or something completely different. I don't
>>>>>>> have a strong opinion at the moment so I'll add some more folks
>>>>>>> to Cc.
>>>>>>
>>>>> You mean GT_ERR("msg") vs intel_gt_err("msg")? Personally, I would
>>>>> prefer just gt_err("msg") to keep it as close to the official drm_*
>>>>> versions as possible. Print lines tend to be excessively long
>>>>> already. Taking a 'gt' parameter instead of a '&gt->i915->drm'
>>>>> parameter does help with that but it seems like calling the wrapper
>>>>> intel_gt_* is shooting ourselves in the foot on that one. And
>>>>> GT_ERR vs gt_err just comes down to the fact that it is a macro
>>>>> wrapper and therefore is required to be in upper case.
>>>>>
>>>>>> There was a maintainer level mini-discussion on this topic which I
>>>>>> will try to summarise.
>>>>>>
>>>>>> Main contention point was the maintenance cost and generally an
>>>>>> undesirable pattern of needing to add many
>>>>>> subsystem/component/directory specific macros. Which then
>>>>>> typically need extra flavours and so on. But over verbosity of the 
>>>>> How many versions are you expecting to add? Beyond the tile
>>>>> instance, what further addressing requirements are there? The card
>>>>> instance is already printed as part of the PCI address. The only
>>>>> other reason to add per component wrappers would be to wrap the
>>>>> mechanism for getting from some random per component object back to
>>>>> the intel_gt structure. But that is hardware a new issue being
>>>>> added by this wrapper. It is also not a requirement. Much of the
>>>>> code has a gt pointer already. For the parts that don't, some of it
>>>>> would be a trivial engine->gt type dereference, some of it is a
>>>>> more complex container_of type construction. But for those, the
>>>>> given file will already have multiple instances of that already
>>>>> (usually as the first or second line of the function - 'intel_gt
>>>>> *gt = fancy_access_method(my_obj)' so adding one or two more of
>>>>> those as necessary is not making the code harder to read.
>>>>>
>>>>>> code is obviously also bad, so one compromise idea was to add a
>>>>>> macro which builds the GT string and use drm logging helpers
>>>>>> directly. This would be something like:
>>>>>>
>>>>>>  drm_err(GT_LOG("something went wrong ret=%d\n", gt), ret);
>>>>>>  drm_info(GT_LOG(...same...));
>>>>> Seriously? As above, some of these lines are already way too long,
>>>>> this version makes them even longer with no obvious benefit. Worse,
>>>>> it makes it harder to read what is going on. It is much less
>>>>> intuitive to read than just replacing the drm_err itself. And
>>>>> having two sets of parenthesis with some parameters inside the
>>>>> first and some only inside the second is really horrid! Also,
>>>>> putting the 'gt' parameter in the middle just confuses it with the
>>>>> rest of the printf arguments even though there is no %d in the
>>>>> string for it. So now a quick glances tells you that your code is
>>>>> wrong because you have three format specifiers but four parameters.
>>>>>
>>>>> Whereas, just replacing drm_err with gt_err (or GT_ERR or
>>>>> intel_gt_err) keeps everything else consistent. The first parameter
>>>>> changes from 'drm' to 'gt' but is still the master object parameter
>>>>> and it matches the function/macro prefix so inherently looks
>>>>> correct. Then you have your message plus parameters. No confusing
>>>>> orders, no confusing parenthesis, no excessive macro levels, no
>>>>> confusion at all. Just nice simple, easy to read, easy to maintain
>>>>> code.
>>>>
>>>> I am personally okay with gt_err/GT_ERR some other folks might
>>>> object though. And I can also understand the argument why it is
>>>> better to not have to define gt_err, gt_warn, gt_info, gt_notice,
>>>> gt_debug, gt_err_ratelimited, gt_warn_once.. and instead have only
>>>> one macro.
>>> A small set of trivial macro definitions vs a complicated and
>>> unreadable construct on every single print? Erm, isn't that the very
>>> definition of abstracting to helpers as generally required by every
>>> code review ever?
>>>
>>> And what 'other folks might object'? People already CC'd? People
>>> outside of i915?
>>>
>>>
>>>>
>>>> Because of that I was passing on to you the compromise option.
>>>>
>>>> It maybe still has net space savings since we wouldn't have to be
>>>> repeating the gt->i915->drm whatever and gt->info.id on every line.
>>>>
>>>> You are free to try the most compact one and see how hard those
>>>> objections will be.
>>> Um. I already did. This patch. And you are the only person to have
>>> objected in any manner at all.
>>
>> Where I have objected?
> Only in everything you have written. Or are you saying that actually I
> could have just taken the r-b from Daniele and merged it while
> completely ignoring everything you have said because you didn't say
> 'NACK' at the top of your email?
> 
>>
>> I was a) asking to convert all gt/ within one kernel release, b)
>> transferring the maintainer discussion from IRC to this email chain to
>> outlay one alternative, for which I said I could see the pros and cons
>> of both, and c) raised the naming question early since that can
>> usually become a churn point later on when we have large scale code
>> transformations.
>>
>> As said, FWIW you have my ack for GT_XXX naming and approach, but
>> please do convert the whole of gt/ so we don't ship with a mish-mash
>> of log messages.
>>
> That sounds like a quite a lot of objections to me - don't do it that
> way, do it this way; fine do it that way but expect lots of complaints
> when you do; oh all right, do it that way but re-write the entire driver
> all at once.
> 
> I really don't get the 'we must not ship with a mish-mash of log
> messages' argument. It's hardly like the current total mish-mash of
> DRM_DEBUG, DRM_DEBUG_DRIVER, pr_dbg, drm_dbg, ... is even remotely
> consistent. It's also not like the patch is massively changing the
> format of the output messages. So some prints get a useful extra three
> characters in advance of others. Does anyone care? Would anyone except
> us even notice?
> 
> Is it really a problem to merge this patch now to get the process
> started? And other sub-components get updated as and when people get the
> time to do them? You could maybe even help rather than posting
> completely conflicting patch sets that basically duplicate all the
> effort for no actual benefit.

Instead of merging this patch now, oriented on GT only, I would rather
wait until we discuss and plan solution for the all sub-components.

Once that's done (with agreement on naming and output) we can start
converting exiting messages.

My proposal would be:
 - use wrappers per component
 - use lower case names
 - don't add colon

#define i915_xxx(_i915, _fmt, ...) \
	drm_xxx(&(_i915)->drm, _fmt, ##__VA_ARGS__)

#define gt_xxx(_gt, _fmt, ...) \
	i915_xxx((_gt)->i915, "GT%u " _fmt, (_gt)->info.id, ..

#define guc_xxx(_guc, _fmt, ...) \
	gt_xxx(guc_to_gt(_guc), "GuC " _fmt, ..

#define ct_xxx(_ct, _fmt, ...) \
	guc_xxx(ct_to_guc(_ct), "CTB " _fmt, ..

where
	xxx = { err, warn, notice, info, dbg }

and then for calls like:

	i915_err(i915, "Foo failed (%pe)\n", ERR_PTR(err));
	  gt_err(gt,   "Foo failed (%pe)\n", ERR_PTR(err));
	 guc_err(guc,  "Foo failed (%pe)\n", ERR_PTR(err));
	  ct_err(ct,   "Foo failed (%pe)\n", ERR_PTR(err));

the output would look like:

[ ] i915 0000:00:02.0: [drm] *ERROR* Foo failed (-EIO)
[ ] i915 0000:00:02.0: [drm] *ERROR* GT0 Foo failed (-EIO)
[ ] i915 0000:00:02.0: [drm] *ERROR* GT0 GuC Foo failed (-EIO)
[ ] i915 0000:00:02.0: [drm] *ERROR* GT0 GuC CTB Foo failed (-EIO)

Would that work for all of you?

Michal

> 
> John.
> 
> 
>> Regards,
>>
>> Tvrtko
> 



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux