Engine busyness samples around a 10ms period is failing with busyness ranging approx. from 87% to 115%. The expected range is +/- 5% of the sample period. When determining busyness of active engine, the GuC based engine busyness implementation relies on a 64 bit timestamp register read. The latency incurred by this register read causes the failure. On DG1, when the test fails, the observed latencies range from 900us - 1.5ms. One solution tried was to reduce the latency between reg read and CPU timestamp capture, but such optimization does not add value to user since the CPU timestamp obtained here is only used for (1) selftest and (2) i915 rps implementation specific to execlist scheduler. Also, this solution only reduces the frequency of failure and does not eliminate it. In order to make the selftest more robust and account for such latencies, increase the sample period to 100 ms. Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@xxxxxxxxx> --- drivers/gpu/drm/i915/gt/selftest_engine_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gt/selftest_engine_pm.c b/drivers/gpu/drm/i915/gt/selftest_engine_pm.c index 0dcb3ed44a73..87c94314cf67 100644 --- a/drivers/gpu/drm/i915/gt/selftest_engine_pm.c +++ b/drivers/gpu/drm/i915/gt/selftest_engine_pm.c @@ -317,7 +317,7 @@ static int live_engine_busy_stats(void *arg) ENGINE_TRACE(engine, "measuring busy time\n"); preempt_disable(); de = intel_engine_get_busy_time(engine, &t[0]); - mdelay(10); + mdelay(100); de = ktime_sub(intel_engine_get_busy_time(engine, &t[1]), de); preempt_enable(); dt = ktime_sub(t[1], t[0]); -- 2.36.1
