Re: [PATCH] drm/i915/hdmi: Prune Interlaced modes for Display >= 12

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 13, 2022 at 10:41:24AM +0530, Ankit Nautiyal wrote:
> Defeature Display Interlace support.
> Support for Interlace modes is removed from Gen 12 onwards.
> For DP we do not support interlace modes (except for very old
> platforms).

Yes we do. Specifically G4X/VLV/CHV do not support it,
everything else does.

> Pruning the interlaced modes for HDMI for Display >=12.
> Bspec: 50490

The tagging there seems borked. Only ADLS shows it as not supported.

> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_hdmi.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 93519fb23d9d..791bfb062c49 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -1990,6 +1990,9 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
>  	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return MODE_NO_DBLESCAN;
>  
> +	if (DISPLAY_VER(dev_priv) >= 12 && mode->flags & DRM_MODE_FLAG_INTERLACE)
> +		return MODE_NO_INTERLACE;
> +

These are pointless if the connector doesn't declare interlace_allowed
anyway.

>  	if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
>  		clock *= 2;
>  
> @@ -2247,6 +2250,10 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
>  
> +	if (DISPLAY_VER(dev_priv) >= 12 &&
> +	    adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
> +		return -EINVAL;
> +
>  	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->has_hdmi_sink = intel_has_hdmi_sink(intel_hdmi,
>  							 conn_state);
> @@ -2956,7 +2963,9 @@ void intel_hdmi_init_connector(struct intel_digital_port *dig_port,
>  				    ddc);
>  	drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
>  
> -	connector->interlace_allowed = true;
> +	if (DISPLAY_VER(dev_priv) < 12)
> +		connector->interlace_allowed = true;
> +
>  	connector->stereo_allowed = true;
>  
>  	if (DISPLAY_VER(dev_priv) >= 10)
> -- 
> 2.25.1

-- 
Ville Syrjälä
Intel



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux