Re: [PATCH] drm/i915/dgfx: Temporary hammer to keep autosuspend control 'on'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I think I commented on this already, but the patch subject should really be as
informative as possible like: "Disable PCI runtime PM on dGPUs" as that is exactly
what the patch does.

Also bit unsure if the Fixes: tag should really point to the runtime PM
commit but maybe instead to the introduction of LMEM commit.

Regards, Joonas

Quoting Anshuman Gupta (2022-10-12 11:34:02)
> DGFX platforms has lmem and cpu can access the lmem objects
> via mmap and i915 internal i915_gem_object_pin_map() for
> i915 own usages. Both of these methods has pre-requisite
> requirement to keep GFX PCI endpoint in D0 for a supported
> iomem transaction over PCI link. (Refer PCIe specs 5.3.1.4.1)
> 
> Both DG1/DG2 have a hardware bug that violates the PCIe specs
> and support the iomem read write transaction over PCIe bus despite
> endpoint is D3 state.
> Due to above H/W bug, we had never observed any issue with i915 runtime
> PM versus lmem access.
> But this issue becomes visible when PCIe gfx endpoint's upstream
> bridge enters to D3, at this point any lmem read/write access will be
> returned as unsupported request. But again this issue is not observed
> on every platform because it has been observed on few host machines
> DG1/DG2 endpoint's upstream bridge does not bind with pcieport driver.
> which really disables the PCIe  power savings and leaves the bridge
> at D0 state.
> 
> Till we fix all issues related to runtime PM, we need
> to keep autosupend control to 'on' on all discrete platforms with lmem.
> 
> Fixes: 527bab0473f2 ("drm/i915/rpm: Enable runtime pm autosuspend by default")
> Suggested-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> Signed-off-by: Anshuman Gupta <anshuman.gupta@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 6ed5786bcd29..410a5cb58a61 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -591,8 +591,15 @@ void intel_runtime_pm_enable(struct intel_runtime_pm *rpm)
>                 pm_runtime_use_autosuspend(kdev);
>         }
>  
> -       /* Enable by default */
> -       pm_runtime_allow(kdev);
> +       /*
> +        *  FIXME: Temp hammer to keep autosupend disable on lmem supported platforms.
> +        *  As per PCIe specs 5.3.1.4.1, all iomem read write request over a PCIe
> +        *  function will be unsupported in case PCIe endpoint function is in D3.
> +        *  Let's keep i915 autosuspend control 'on' till we fix all known issue
> +        *  with lmem access in D3.
> +        */
> +       if (!HAS_LMEM(i915))
> +               pm_runtime_allow(kdev);
>  
>         /*
>          * The core calls the driver load handler with an RPM reference held.
> -- 
> 2.25.1
> 




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux