Re: [PATCH] drm/i915/guc: do not capture error state on exiting context

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 28/09/2022 19:27, John Harrison wrote:
On 9/28/2022 00:19, Tvrtko Ursulin wrote:
On 27/09/2022 22:36, Ceraolo Spurio, Daniele wrote:
On 9/27/2022 12:45 AM, Tvrtko Ursulin wrote:
On 27/09/2022 07:49, Andrzej Hajda wrote:
On 27.09.2022 01:34, Ceraolo Spurio, Daniele wrote:
On 9/26/2022 3:44 PM, Andi Shyti wrote:
Hi Andrzej,

On Mon, Sep 26, 2022 at 11:54:09PM +0200, Andrzej Hajda wrote:
Capturing error state is time consuming (up to 350ms on DG2), so it should be avoided if possible. Context reset triggered by context removal is a
good example.
With this patch multiple igt tests will not timeout and should run faster.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1551
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3952
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5891
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6268
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6281
Signed-off-by: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
fine for me:

Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>

Just to be on the safe side, can we also have the ack from any of
the GuC folks? Daniele, John?

Andi


---
  drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
index 22ba66e48a9b01..cb58029208afe1 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -4425,7 +4425,8 @@ static void guc_handle_context_reset(struct intel_guc *guc,
      trace_intel_context_reset(ce);
        if (likely(!intel_context_is_banned(ce))) {
-        capture_error_state(guc, ce);
+        if (!intel_context_is_exiting(ce))
+            capture_error_state(guc, ce);

I am not sure here - if we have a persistent context which caused a GPU hang I'd expect we'd still want error capture.

What causes the reset in the affected IGTs? Always preemption timeout?

guc_context_replay(ce);

You definitely don't want to replay requests of a context that is going away.

My intention was to just avoid error capture, but that's even better, only condition change:
-        if (likely(!intel_context_is_banned(ce))) {
+       if (likely(intel_context_is_schedulable(ce)))  {

Yes that helper was intended to be used for contexts which should not be scheduled post exit or ban.

Daniele - you say there are some misses in the GuC backend. Should most, or even all in intel_guc_submission.c be converted to use intel_context_is_schedulable? My idea indeed was that "ban" should be a level up from the backends. Backend should only distinguish between "should I run this or not", and not the reason.

I think that all of them should be updated, but I'd like Matt B to confirm as he's more familiar with the code than me.

Right, that sounds plausible to me as well.

One thing I forgot to mention - the only place where backend can care between "schedulable" and "banned" is when it picks the preempt timeout for non-schedulable contexts. This is to only apply the strict 1ms to banned (so bad or naught contexts), while the ones which are exiting cleanly get the full preempt timeout as otherwise configured. This solves the ugly user experience quirk where GPU resets/errors were logged upon exit/Ctrl-C of a well behaving application (using non-persistent contexts). Hopefully GuC can match that behaviour so customers stay happy.

Regards,

Tvrtko

The whole revoke vs ban thing seems broken to me.

First of all, if the user hits Ctrl+C we need to kill the context off immediately. That is a fundamental customer requirement. Render and compute engines have a 7.5s pre-emption timeout. The user should not have to wait 7.5s for a context to be removed from the system when they have explicitly killed it themselves. Even the regular timeout of 640ms is borderline a long time to wait. And note that there is an ongoing request/requirement to increase that to 1900ms.

Under what circumstances would a user expect anything sensible to happen after a Ctrl+C in terms of things finishing their rendering and display nice pretty images? They killed the app. They want it dead. We should be getting it off the hardware as quickly as possible. If you are really concerned about resets causing collateral damage then maybe bump the termination timeout from 1ms up to 10ms, maybe at most 100ms. If an app is 'well behaved' then it should cleanly exit within 10ms. But if it is bad (which is almost certainly the case if the user is manually and explicitly killing it) then it needs to be killed because it is not going to gracefully exit.

Right.. I had it like that initially (lower timeout - I think 20ms or so, patch history on the mailing list would know for sure), but then simplified it after review feedback to avoid adding another timeout value.

So it's not at all about any expectation that something should actually finish to any sort of completion/success. It is primarily about not logging an error message when there is no error. Thing to keep in mind is that error messages are a big deal in some cultures. In addition to that, avoiding needless engine resets is a good thing as well.

Previously the execlists backend was over eager and only allowed for 1ms for such contexts to exit. If the context was banned sure - that means it was a bad context which was causing many hangs already. But if the context was a clean one I argue there is no point in doing an engine reset.

So if you want, I think it is okay to re-introduce a secondary timeout.

Or if you have an idea on how to avoid the error messages / GPU resets when "friendly" contexts exit in some other way, that is also something to discuss.

Secondly, the whole persistence thing is a total mess, completely broken and intended to be massively simplified. See the internal task for it. In short, the plan is that all contexts will be immediately killed when the last DRM file handle is closed. Persistence is only valid between the time the per context file handle is closed and the time the master DRM handle is closed. Whereas, non-persistent contexts get killed as soon as the per context handle is closed. There is absolutely no connection to heartbeats or other irrelevant operations.

The change we are discussing is not about persistence, but for the persistence itself - I am not sure it is completely broken and if, or when, the internal task will result with anything being attempted. In the meantime we had unhappy customers for more than a year. So do we tell them "please wait for a few years more until some internal task with no clear timeline or anyone assigned maybe gets looked at"?

So in my view, the best option is to revert the ban vs revoke patch. It is creating bugs. It is making persistence more complex not simpler. It harms the user experience.

I am not aware of the bugs, even less so that it is harming user experience!?

Bugs are limited to the GuC backend or in general? My CI runs were clean so maybe test cases are lacking. Is it just a case of s/intel_context_is_banned/intel_context_is_schedulable/ in there to fix it?

Again, the change was not about persistence. It is the opposite - allowing non-persistent contexts to exit cleanly.

If the original problem was simply that error captures were being done on Ctrl+C then the fix is simple. Don't capture for a banned context. There is no need for all the rest of the revoke patch.

Error capture was not part of the original story so it may be a completely orthogonal topic that we are discussing it in this thread.

Regards,

Tvrtko



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux