Add GSC support for XeHP SDV and DG2 platforms.
The series includes changes for the mei driver:
- add ability to use polling instead of interrupts
- add ability to use extended timeouts
- setup extended operational memory for GSC
The series includes changes for the i915 driver:
- allocate extended operational memory for GSC
- GSC on XeHP SDV offsets and definitions
This patch set should be merged via gfx tree as
the auxiliary device belongs there.
Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
V2: rebase over merged DG1 series and DG2 enablement patch,
fix commit messages
V3: rebase over latest tip
V4: add missed changelog in pxp dbugfs patch
V5: rebase over latest tip
fix changelog in pxp dbugfs patch
put HAX patch last to the ease of merging
reorder patches in the series
V6: change prefix from 'drm/i915/gsc:' to 'mei' in patch:
mei: add slow_fw flag to the mei auxiliary device
Address following checkpatch warnings:
CHECK:PREFER_KERNEL_TYPES: Prefer kernel type 'u32' over 'uint32_t'
FILE: drivers/misc/mei/mkhi.h:54:
+ uint32_t flags;
-:51: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'cldev->bus->pxp_mode != MEI_DEV_PXP_INIT'
#51: FILE: drivers/misc/mei/bus-fixup.c:257:
+ if (!cldev->bus->fw_f_fw_ver_supported &&
+ (cldev->bus->pxp_mode != MEI_DEV_PXP_INIT)
Remove some spurious code formatting changes in:
drm/i915/gsc: allocate extended operational memory in LMEM
V7: Add new patch to add kdoc for mei_aux_device structure.
Rename slow_fw to slow_firmware flag.
Use drm_dbg/err() functions instead of dev_dbg/err() in i195
codebase.
V8:
1. Update copyright dates
1. Add kdoc and comments to mei_me_polling_thread()
2. Fix pgi->d0i3 timeout in mei_me_d0i3_enter_sync()
3. <linux/types.h> is enough for mkhi header.
4. drop MCHI_GROUP_ID definition it is not used
5. Setup default PXP state
6. Add PXP mode kdoc
7. Add new patch mei: drop ready bits check after start
V9:
1. Fix pgi->d0i3 timeout in mei_me_d0i3_exit_sync()
2. Fix mismatch in the patch "mei: mkhi: add memory ready command"
3. Use I915_BO_ALLOC_CPU_CLEAR to clear the allocated memory
Alexander Usyskin (5):
drm/i915/gsc: add slow_firmware flag to the gsc device definition
drm/i915/gsc: add GSC XeHP SDV platform definition
mei: gsc: wait for reset thread on stop
mei: extend timeouts on slow devices
mei: drop ready bits check after start
Daniele Ceraolo Spurio (1):
HAX: drm/i915: force INTEL_MEI_GSC on for CI
Tomas Winkler (7):
mei: add kdoc for struct mei_aux_device
mei: add slow_firmware flag to the mei auxiliary device
mei: gsc: use polling instead of interrupts
mei: mkhi: add memory ready command
mei: gsc: setup gsc extended operational memory
mei: debugfs: add pxp mode to devstate in debugfs
drm/i915/gsc: allocate extended operational memory in LMEM
Vitaly Lubart (3):
drm/i915/gsc: skip irq initialization if using polling
mei: bus: export common mkhi definitions into a separate header
mei: gsc: add transition to PXP mode in resume flow
drivers/gpu/drm/i915/Kconfig.debug | 1 +
drivers/gpu/drm/i915/gt/intel_gsc.c | 106 +++++++++++++++++++--
drivers/gpu/drm/i915/gt/intel_gsc.h | 3 +
drivers/misc/mei/bus-fixup.c | 106 ++++++++++++++-------
drivers/misc/mei/client.c | 16 ++--
drivers/misc/mei/debugfs.c | 19 +++-
drivers/misc/mei/gsc-me.c | 77 ++++++++++++++--
drivers/misc/mei/hbm.c | 14 +--
drivers/misc/mei/hw-me-regs.h | 9 +-
drivers/misc/mei/hw-me.c | 138 ++++++++++++++++++++++++----
drivers/misc/mei/hw-me.h | 17 +++-
drivers/misc/mei/hw-txe.c | 4 +-
drivers/misc/mei/hw.h | 7 +-
drivers/misc/mei/init.c | 35 ++++---
drivers/misc/mei/main.c | 4 +-
drivers/misc/mei/mei_dev.h | 35 ++++++-
drivers/misc/mei/mkhi.h | 55 +++++++++++
drivers/misc/mei/pci-me.c | 4 +-
include/linux/mei_aux.h | 12 +++
19 files changed, 548 insertions(+), 114 deletions(-)
create mode 100644 drivers/misc/mei/mkhi.h
--
2.37.2
