Re: [PATCH v8 05/16] drm/i915/gsc: add GSC XeHP SDV platform definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 9/7/2022 8:58 AM, Tomas Winkler wrote:
From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>

Define GSC on XeHP SDV (Intel(R) dGPU without display)

XeHP SDV uses the same hardware settings as DG1, but uses polling
instead of interrupts and runs the firmware in slow pace due to
hardware limitations.

Signed-off-by: Vitaly Lubart <vitaly.lubart@xxxxxxxxx>
Signed-off-by: Tomas Winkler <tomas.winkler@xxxxxxxxx>
Signed-off-by: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>

This is unchanged from the previously reviewed rev, so this still applies:

Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@xxxxxxxxx>

Daniele

---
  drivers/gpu/drm/i915/gt/intel_gsc.c | 15 +++++++++++++++
  1 file changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/intel_gsc.c b/drivers/gpu/drm/i915/gt/intel_gsc.c
index 73498c2574c8..e1040c8f2fd3 100644
--- a/drivers/gpu/drm/i915/gt/intel_gsc.c
+++ b/drivers/gpu/drm/i915/gt/intel_gsc.c
@@ -56,6 +56,19 @@ static const struct gsc_def gsc_def_dg1[] = {
  	}
  };
+static const struct gsc_def gsc_def_xehpsdv[] = {
+	{
+		/* HECI1 not enabled on the device. */
+	},
+	{
+		.name = "mei-gscfi",
+		.bar = DG1_GSC_HECI2_BASE,
+		.bar_size = GSC_BAR_LENGTH,
+		.use_polling = true,
+		.slow_firmware = true,
+	}
+};
+
  static const struct gsc_def gsc_def_dg2[] = {
  	{
  		.name = "mei-gsc",
@@ -107,6 +120,8 @@ static void gsc_init_one(struct drm_i915_private *i915,
if (IS_DG1(i915)) {
  		def = &gsc_def_dg1[intf_id];
+	} else if (IS_XEHPSDV(i915)) {
+		def = &gsc_def_xehpsdv[intf_id];
  	} else if (IS_DG2(i915)) {
  		def = &gsc_def_dg2[intf_id];
  	} else {




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux