Watermark latency is adjusted in cases when latency is 0us for level
greater than 1, the subsequent levels are disabled. Extract this logic
into its own function.
Suggested-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_pm.c | 88 ++++++++++++++++++---------------
1 file changed, 48 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index ef7553b494ea..898e56d2eaf7 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2861,15 +2861,59 @@ static void ilk_compute_wm_level(const struct drm_i915_private *dev_priv,
result->enable = true;
}
+static void
+adjust_wm_latency(u16 wm[], int max_level, int read_latency,
+ bool wm_lv_0_adjust_needed)
+{
+ int i, level;
+
+ /*
+ * If a level n (n > 1) has a 0us latency, all levels m (m >= n)
+ * need to be disabled. We make sure to sanitize the values out
+ * of the punit to satisfy this requirement.
+ */
+ for (level = 1; level <= max_level; level++) {
+ if (wm[level] == 0) {
+ for (i = level + 1; i <= max_level; i++)
+ wm[i] = 0;
+
+ max_level = level - 1;
+ break;
+ }
+ }
+
+ /*
+ * WaWmMemoryReadLatency
+ *
+ * punit doesn't take into account the read latency so we need
+ * to add proper adjustement to each valid level we retrieve
+ * from the punit when level 0 response data is 0us.
+ */
+ if (wm[0] == 0) {
+ for (level = 0; level <= max_level; level++)
+ wm[level] += read_latency;
+ }
+
+ /*
+ * WA Level-0 adjustment for 16GB DIMMs: SKL+
+ * If we could not get dimm info enable this WA to prevent from
+ * any underrun. If not able to get Dimm info assume 16GB dimm
+ * to avoid any underrun.
+ */
+ if (wm_lv_0_adjust_needed)
+ wm[0] += 1;
+}
+
static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
u16 wm[])
{
struct intel_uncore *uncore = &dev_priv->uncore;
if (DISPLAY_VER(dev_priv) >= 9) {
+ int read_latency = DISPLAY_VER(dev_priv) >= 12 ? 3 : 2;
u32 val;
- int ret, i;
- int level, max_level = ilk_wm_max_level(dev_priv);
+ int ret;
+ int max_level = ilk_wm_max_level(dev_priv);
int mult = IS_DG2(dev_priv) ? 2 : 1;
/* read the first set of memory latencies[0:3] */
@@ -2909,44 +2953,8 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
wm[7] = ((val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK) * mult;
- /*
- * If a level n (n > 1) has a 0us latency, all levels m (m >= n)
- * need to be disabled. We make sure to sanitize the values out
- * of the punit to satisfy this requirement.
- */
- for (level = 1; level <= max_level; level++) {
- if (wm[level] == 0) {
- for (i = level + 1; i <= max_level; i++)
- wm[i] = 0;
-
- max_level = level - 1;
-
- break;
- }
- }
-
- /*
- * WaWmMemoryReadLatency
- *
- * punit doesn't take into account the read latency so we need
- * to add proper adjustement to each valid level we retrieve
- * from the punit when level 0 response data is 0us.
- */
- if (wm[0] == 0) {
- u8 adjust = DISPLAY_VER(dev_priv) >= 12 ? 3 : 2;
-
- for (level = 0; level <= max_level; level++)
- wm[level] += adjust;
- }
-
- /*
- * WA Level-0 adjustment for 16GB DIMMs: SKL+
- * If we could not get dimm info enable this WA to prevent from
- * any underrun. If not able to get Dimm info assume 16GB dimm
- * to avoid any underrun.
- */
- if (dev_priv->dram_info.wm_lv_0_adjust_needed)
- wm[0] += 1;
+ adjust_wm_latency(wm, max_level, read_latency,
+ dev_priv->dram_info.wm_lv_0_adjust_needed);
} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
u64 sskpd = intel_uncore_read64(uncore, MCH_SSKPD);
--
2.25.1
