Re: [PATCH] drm/i915/dp: wait on timeout before retry

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Murthy, Arun R <arun.r.murthy@xxxxxxxxx>
> Sent: Monday, July 4, 2022 12:54 PM
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: ville.syrjala@xxxxxxxxxxxxxxx; Zanoni, Paulo R <paulo.r.zanoni@xxxxxxxxx>;
> tprevite@xxxxxxxxx; Shankar, Uma <uma.shankar@xxxxxxxxx>; Nikula, Jani
> <jani.nikula@xxxxxxxxx>; Murthy, Arun R <arun.r.murthy@xxxxxxxxx>
> Subject: [PATCH] drm/i915/dp: wait on timeout before retry
> 
> On linktraining error/timeout before retry need to wait for 400usec as per the DP
> CTS spec1.2 Under section 2.7.2 AUX Transaction Response/Reply Time-outs AUX
> Replier (the uPacket RX) must start sending the reply back to the AUX requester (the
> uPacket TX) within the response period of 300μs. The timer for Response Time-out
> starts ticking after the uPacket RX has finished receiving the AUX STOP condition
> which ends the AUX Request transaction.
> The timer is reset either when the Response Time-out period has elapsed or when
> the uPacket RX has started to send the AUX Sync pattern (which follows
> 10 to 16 active pre-charge pulses) for the Reply transaction. If the uPacket TX does
> not receive a reply from the uPacket RX it must wait for a Reply Time-out period of
> 400us before initiating the next AUX Request transaction. The timer for the Reply
> Time-out starts ticking after the uPacket TX has finished sending the AUX STOP
> condition.
> 
> The patch with commit 74ebf294a1dd ("drm/i915: Add a delay in Displayport AUX
> transactions for compliance testing") removes this delay mentioning the hardware
> already meets this requirement, but as per the spec the delay mentioned in the spec
> specifies how long to wait for the receiver response before timeout. So the delay
> here to wait for timeout and not a delay after timeout. The DP spec specifies a delay
> after timeout and hence adding this delay.
> 
> v2: fixed checkpatch warning and error
> v3: used proper indentation
> v4: added DP CEA 1.2 spec details in patch commit msg

Looks Good to me.
Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx>

> Signed-off-by: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
> Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_dp_aux.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c
> b/drivers/gpu/drm/i915/display/intel_dp_aux.c
> index 2bc119374555..722c9f210690 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c
> @@ -286,13 +286,9 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
>  			/*
>  			 * DP CTS 1.2 Core Rev 1.1, 4.2.1.1 & 4.2.1.2
>  			 *   400us delay required for errors and timeouts
> -			 *   Timeout errors from the HW already meet this
> -			 *   requirement so skip to next iteration
>  			 */
> -			if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR)
> -				continue;
> -
> -			if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
> +			if (status & (DP_AUX_CH_CTL_RECEIVE_ERROR |
> +				      DP_AUX_CH_CTL_TIME_OUT_ERROR)) {
>  				usleep_range(400, 500);
>  				continue;
>  			}
> --
> 2.25.1





[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux