On Wed, 18 May 2022, Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote: > On Wed, May 18, 2022 at 02:33:14PM +0300, Jani Nikula wrote: >> Use REG_GENMASK() and REG_FIELD_PREP() to avoid errors due to >> -fsanitize=shift. > > I presume it's just unhappy about shifting into the sign bit? Yeah, and apparently it also only happens on some GCC versions. *shrug*. > > Changes look correct: > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Thanks, Jani. > >> >> References: https://lore.kernel.org/r/20220405151517.29753-12-bp@xxxxxxxxx >> Reported-by: Borislav Petkov <bp@xxxxxxx> >> Reported-by: Ruiqi GONG <gongruiqi1@xxxxxxxxxx> >> Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx> >> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> >> --- >> drivers/gpu/drm/i915/i915_reg.h | 32 ++++++++++++++++---------------- >> 1 file changed, 16 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h >> index 321a08281a3f..dff3f88d8090 100644 >> --- a/drivers/gpu/drm/i915/i915_reg.h >> +++ b/drivers/gpu/drm/i915/i915_reg.h >> @@ -7607,25 +7607,25 @@ enum skl_power_gate { >> #define _PORT_CLK_SEL_A 0x46100 >> #define _PORT_CLK_SEL_B 0x46104 >> #define PORT_CLK_SEL(port) _MMIO_PORT(port, _PORT_CLK_SEL_A, _PORT_CLK_SEL_B) >> -#define PORT_CLK_SEL_LCPLL_2700 (0 << 29) >> -#define PORT_CLK_SEL_LCPLL_1350 (1 << 29) >> -#define PORT_CLK_SEL_LCPLL_810 (2 << 29) >> -#define PORT_CLK_SEL_SPLL (3 << 29) >> -#define PORT_CLK_SEL_WRPLL(pll) (((pll) + 4) << 29) >> -#define PORT_CLK_SEL_WRPLL1 (4 << 29) >> -#define PORT_CLK_SEL_WRPLL2 (5 << 29) >> -#define PORT_CLK_SEL_NONE (7 << 29) >> -#define PORT_CLK_SEL_MASK (7 << 29) >> +#define PORT_CLK_SEL_MASK REG_GENMASK(31, 29) >> +#define PORT_CLK_SEL_LCPLL_2700 REG_FIELD_PREP(PORT_CLK_SEL_MASK, 0) >> +#define PORT_CLK_SEL_LCPLL_1350 REG_FIELD_PREP(PORT_CLK_SEL_MASK, 1) >> +#define PORT_CLK_SEL_LCPLL_810 REG_FIELD_PREP(PORT_CLK_SEL_MASK, 2) >> +#define PORT_CLK_SEL_SPLL REG_FIELD_PREP(PORT_CLK_SEL_MASK, 3) >> +#define PORT_CLK_SEL_WRPLL(pll) REG_FIELD_PREP(PORT_CLK_SEL_MASK, 4 + (pll)) >> +#define PORT_CLK_SEL_WRPLL1 REG_FIELD_PREP(PORT_CLK_SEL_MASK, 4) >> +#define PORT_CLK_SEL_WRPLL2 REG_FIELD_PREP(PORT_CLK_SEL_MASK, 5) >> +#define PORT_CLK_SEL_NONE REG_FIELD_PREP(PORT_CLK_SEL_MASK, 7) >> >> /* On ICL+ this is the same as PORT_CLK_SEL, but all bits change. */ >> #define DDI_CLK_SEL(port) PORT_CLK_SEL(port) >> -#define DDI_CLK_SEL_NONE (0x0 << 28) >> -#define DDI_CLK_SEL_MG (0x8 << 28) >> -#define DDI_CLK_SEL_TBT_162 (0xC << 28) >> -#define DDI_CLK_SEL_TBT_270 (0xD << 28) >> -#define DDI_CLK_SEL_TBT_540 (0xE << 28) >> -#define DDI_CLK_SEL_TBT_810 (0xF << 28) >> -#define DDI_CLK_SEL_MASK (0xF << 28) >> +#define DDI_CLK_SEL_MASK REG_GENMASK(31, 28) >> +#define DDI_CLK_SEL_NONE REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0x0) >> +#define DDI_CLK_SEL_MG REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0x8) >> +#define DDI_CLK_SEL_TBT_162 REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0xC) >> +#define DDI_CLK_SEL_TBT_270 REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0xD) >> +#define DDI_CLK_SEL_TBT_540 REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0xE) >> +#define DDI_CLK_SEL_TBT_810 REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0xF) >> >> /* Transcoder clock selection */ >> #define _TRANS_CLK_SEL_A 0x46140 >> -- >> 2.30.2 -- Jani Nikula, Intel Open Source Graphics Center
