+ };
+};
+
+/**
+ * struct __drm_i915_gem_create_ext - Existing gem_create
behaviour, with added
+ * extension support using struct i915_user_extension.
+ *
+ * Note that new buffer flags should be added here, at least for
the stuff that
+ * is immutable. Previously we would have two ioctls, one to create
the object
+ * with gem_create, and another to apply various parameters,
however this
+ * creates some ambiguity for the params which are considered
immutable. Also in
+ * general we're phasing out the various SET/GET ioctls.
+ */
+struct __drm_i915_gem_create_ext {
+ /**
+ * @size: Requested size for the object.
+ *
+ * The (page-aligned) allocated size for the object will be
returned.
+ *
+ * Note that for some devices we have might have further minimum
+ * page-size restrictions(larger than 4K), like for device
local-memory.
+ * However in general the final size here should always reflect
any
+ * rounding up, if for example using the
I915_GEM_CREATE_EXT_MEMORY_REGIONS
+ * extension to place the object in device local-memory.
+ */
+ __u64 size;
+ /**
+ * @handle: Returned handle for the object.
+ *
+ * Object handles are nonzero.
+ */
+ __u32 handle;
+ /**
+ * @flags: Optional flags.
+ *
+ * Supported values:
+ *
+ * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS - Signal to the
kernel that
+ * the object will need to be accessed via the CPU.
+ *
+ * Only valid when placing objects in I915_MEMORY_CLASS_DEVICE,
and
+ * only strictly required on platforms where only some of the
device
+ * memory is directly visible or mappable through the CPU, like
on DG2+.
+ *
+ * One of the placements MUST also be I915_MEMORY_CLASS_SYSTEM, to
+ * ensure we can always spill the allocation to system memory,
if we
+ * can't place the object in the mappable part of
+ * I915_MEMORY_CLASS_DEVICE.
+ *
+ * Note that since the kernel only supports flat-CCS on objects
that can
+ * *only* be placed in I915_MEMORY_CLASS_DEVICE, we therefore
don't
+ * support I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS together with
+ * flat-CCS.
+ *
+ * Without this hint, the kernel will assume that non-mappable
+ * I915_MEMORY_CLASS_DEVICE is preferred for this object. Note
that the
+ * kernel can still migrate the object to the mappable part, as
a last
+ * resort, if userspace ever CPU faults this object, but this
might be
+ * expensive, and so ideally should be avoided.
+ */
+#define I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS (1 << 0)
+ __u32 flags;
+ /**
+ * @extensions: The chain of extensions to apply to this object.
+ *
+ * This will be useful in the future when we need to support
several
+ * different extensions, and we need to apply more than one when
+ * creating the object. See struct i915_user_extension.
+ *
+ * If we don't supply any extensions then we get the same old
gem_create
+ * behaviour.
+ *
+ * For I915_GEM_CREATE_EXT_MEMORY_REGIONS usage see
+ * struct drm_i915_gem_create_ext_memory_regions.
+ *
+ * For I915_GEM_CREATE_EXT_PROTECTED_CONTENT usage see
+ * struct drm_i915_gem_create_ext_protected_content.
+ */
+#define I915_GEM_CREATE_EXT_MEMORY_REGIONS 0
+#define I915_GEM_CREATE_EXT_PROTECTED_CONTENT 1
+ __u64 extensions;
+};
+
+#define DRM_I915_QUERY_VMA_INFO 5
+
+/**
+ * struct __drm_i915_query_vma_info
+ *
+ * Given a vm and GTT address, lookup the corresponding vma,
returning its set
+ * of attributes.
+ *
+ * .. code-block:: C
+ *
+ * struct drm_i915_query_vma_info info = {};
+ * struct drm_i915_query_item item = {
+ * .data_ptr = (uintptr_t)&info,
+ * .query_id = DRM_I915_QUERY_VMA_INFO,
+ * };
+ * struct drm_i915_query query = {
+ * .num_items = 1,
+ * .items_ptr = (uintptr_t)&item,
+ * };
+ * int err;
+ *
+ * // Unlike some other types of queries, there is no need to
first query
+ * // the size of the data_ptr blob here, since we already know
ahead of
+ * // time how big this needs to be.
+ * item.length = sizeof(info);
+ *
+ * // Next we fill in the vm_id and ppGTT address of the vma we
wish
+ * // to query, before then firing off the query.
+ * info.vm_id = vm_id;
+ * info.offset = gtt_address;
+ * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ * if (err || item.length < 0) ...
+ *
+ * // If all went well we can now inspect the returned attributes.
+ * if (info.attributes & DRM_I915_QUERY_VMA_INFO_CPU_VISIBLE) ...
+ */
+struct __drm_i915_query_vma_info {
+ /**
+ * @vm_id: The given vm id that contains the vma. The id is the
value
+ * returned by the DRM_I915_GEM_VM_CREATE. See struct
+ * drm_i915_gem_vm_control.vm_id.
+ */
+ __u32 vm_id;
+ /** @pad: MBZ. */
+ __u32 pad;
+ /**
+ * @offset: The corresponding ppGTT address of the vma which
the kernel
+ * will use to perform the lookup.
+ */
+ __u64 offset;
+ /**
+ * @attributes: The returned attributes for the given vma.
+ *
+ * Possible values:
+ *
+ * DRM_I915_QUERY_VMA_INFO_CPU_VISIBLE - Set if the pages
backing the
+ * vma are currently CPU accessible. If this is not set then
the vma is
+ * currently backed by I915_MEMORY_CLASS_DEVICE memory, which
the CPU
+ * cannot directly access(this is only possible on discrete
devices with
+ * a small BAR). Attempting to MMAP and fault such an object will
+ * require the kernel first synchronising any GPU work tied to the
+ * object, before then migrating the pages, either to the CPU
accessible
+ * part of I915_MEMORY_CLASS_DEVICE, or
I915_MEMORY_CLASS_SYSTEM, if the
+ * placements permit it. See
I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS.
+ *
+ * Note that this is inherently racy.
+ */
+#define DRM_I915_QUERY_VMA_INFO_CPU_VISIBLE (1<<0)
+ __u64 attributes;
+ /** @rsvd: MBZ */
+ __u32 rsvd[4];
+};
diff --git a/Documentation/gpu/rfc/i915_small_bar.rst
b/Documentation/gpu/rfc/i915_small_bar.rst
new file mode 100644
index 000000000000..be3d9bcdd86d
--- /dev/null
+++ b/Documentation/gpu/rfc/i915_small_bar.rst
@@ -0,0 +1,58 @@
+==========================
+I915 Small BAR RFC Section
+==========================
+Starting from DG2 we will have resizable BAR support for device
local-memory(i.e
+I915_MEMORY_CLASS_DEVICE), but in some cases the final BAR size
might still be
+smaller than the total probed_size. In such cases, only some subset of
+I915_MEMORY_CLASS_DEVICE will be CPU accessible(for example the
first 256M),
+while the remainder is only accessible via the GPU.
+
+I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS flag
+----------------------------------------------
+New gem_create_ext flag to tell the kernel that a BO will require
CPU access.
+This becomes important when placing an object in
I915_MEMORY_CLASS_DEVICE, where
+underneath the device has a small BAR, meaning only some portion of
it is CPU
+accessible. Without this flag the kernel will assume that CPU
access is not
+required, and prioritize using the non-CPU visible portion of
+I915_MEMORY_CLASS_DEVICE.
+
+.. kernel-doc:: Documentation/gpu/rfc/i915_small_bar.h
+ :functions: __drm_i915_gem_create_ext
+
+probed_cpu_visible_size attribute
+---------------------------------
+New struct__drm_i915_memory_region attribute which returns the
total size of the
+CPU accessible portion, for the particular region. This should only be
+applicable for I915_MEMORY_CLASS_DEVICE.
+
+Vulkan will need this as part of creating a separate VkMemoryHeap
with the
+VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT set, to represent the CPU
visible portion,
+where the total size of the heap needs to be known.
+
+.. kernel-doc:: Documentation/gpu/rfc/i915_small_bar.h
+ :functions: __drm_i915_memory_region_info
+
+DRM_I915_QUERY_VMA_INFO query
+-----------------------------
+Query the attributes of some vma. Given a vm and GTT offset, find the
+respective vma, and return its set of attributes. For now we only
support
+DRM_I915_QUERY_VMA_INFO_CPU_VISIBLE, which is set if the object/vma is
+currently placed in memory that is accessible by the CPU. This
should always be
+set on devices where the CPU probed_cpu_visible_size of
I915_MEMORY_CLASS_DEVICE
+matches the probed_size. If this is not set then CPU faulting the
object will
+likely first require migrating the pages.
+
+.. kernel-doc:: Documentation/gpu/rfc/i915_small_bar.h
+ :functions: __drm_i915_query_vma_info
+
+Error Capture restrictions
+--------------------------
+With error capture we have two new restrictions:
+
+ 1) Error capture is best effort on small BAR systems; if the
pages are not
+ CPU accessible, at the time of capture, then the kernel is free
to skip
+ trying to capture them.
+
+ 2) On discrete we now reject error capture on recoverable
contexts. In the
+ future the kernel may want to blit during error capture, when
for example
+ something is not currently CPU accessible.
diff --git a/Documentation/gpu/rfc/index.rst
b/Documentation/gpu/rfc/index.rst
index 91e93a705230..5a3bd3924ba6 100644
--- a/Documentation/gpu/rfc/index.rst
+++ b/Documentation/gpu/rfc/index.rst
@@ -23,3 +23,7 @@ host such documentation:
.. toctree::
i915_scheduler.rst
+
+.. toctree::
+
+ i915_small_bar.rst
