In configurations with single DRAM channel, for usecases like 4K 60 Hz, FIFO underruns are observed quite frequently. Looks like the wm0 watermark values need to bumped up because the wm0 memory latency calculations are probably not taking the DRAM channel's impact into account. As per the Bspec 49325, if the ddb allocation can hold at least one plane_blocks_per_line we should have selected method2. Assuming that modern HW versions have enough dbuf to hold at least one line, set the wm blocks to equivalent to blocks per line. cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> cc: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx> --- drivers/gpu/drm/i915/intel_pm.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 8824f269e5f5..ae28a8c63ca4 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5474,7 +5474,24 @@ static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state, } } - blocks = fixed16_to_u32_round_up(selected_result) + 1; + /* + * Lets have blocks at minimum equivalent to plane_blocks_per_line + * as there will be at minimum one line for lines configuration. + * + * As per the Bspec 49325, if the ddb allocation can hold at least + * one plane_blocks_per_line, we should have selected method2 in + * the above logic. Assuming that modern versions have enough dbuf + * and method2 guarantees blocks equivalent to at least 1 line, + * select the blocks as plane_blocks_per_line. + * + * TODO: Revisit the logic when we have better understanding on DRAM + * channels' impact on the level 0 memory latency and the relevant + * wm calculations. + */ + blocks = skl_wm_has_lines(dev_priv, level) ? + max_t(u32, fixed16_to_u32_round_up(selected_result) + 1, + fixed16_to_u32_round_up(wp->plane_blocks_per_line)) : + fixed16_to_u32_round_up(selected_result) + 1; lines = div_round_up_fixed16(selected_result, wp->plane_blocks_per_line); -- 2.25.1
