On Mon, 2022-03-21 at 12:49 +0200, Stanislav Lisovskiy wrote:
> We are currently getting FIFO underruns, in particular
> when PSR2 is enabled. There seem to be no existing workaround
> or patches, which can fix that issue(were expecting some recent
> selective fetch update and DBuf bw/SAGV fixes to help,
> which unfortunately didn't).
> Current idea is that it looks like for some reason the
> DBuf prefill time isn't enough once we exit PSR2, despite its
> theoretically correct.
> So bump it up a bit by 15%(minimum experimental amount required
> to get it working), if PSR2 is enabled.
> For PSR1 there is no need in this hack, so we limit it only
> to PSR2 and Alderlake.
>
> v2: - Added comment(Jose Souza)
> - Fixed 15% calculation(Jose Souza)
>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_cdclk.c | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index 8888fda8b701..92d57869983a 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -2325,6 +2325,32 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
> dev_priv->max_cdclk_freq));
> }
>
> +
> + /*
> + * HACK. We are getting FIFO underruns, in particular
> + * when PSR2 is enabled. There seem to be no existing workaround
> + * or patches as of now.
> + * Current idea is that it looks like for some reason the
> + * DBuf prefill time isn't enough once we exit PSR2, despite its
> + * theoretically correct.
> + * So bump it up a bit by 15%(minimum experimental amount required
> + * to get it working), if PSR2 is enabled.
> + * For PSR1 there is no need in this hack, so we limit it only
> + * to PSR2 and Alderlake.
> + */
> + if (IS_ALDERLAKE_P(dev_priv)) {
And please check if we can only apply this when two or more pipes are enabled.
Otherwise this will impact power numbers in the case that is matters most.
> + struct intel_encoder *encoder;
> +
> + for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) {
> + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> +
> + if (intel_dp->psr.psr2_enabled) {
> + min_cdclk = DIV_ROUND_UP(min_cdclk * 115, 100);
> + break;
> + }
> + }
> + }
> +
> if (min_cdclk > dev_priv->max_cdclk_freq) {
> drm_dbg_kms(&dev_priv->drm,
> "required cdclk (%d kHz) exceeds max (%d kHz)\n",
