The VT-d spec requires (10.4.4 Global Command Register, TE field) that: Hardware implementations supporting DMA draining must drain any in-flight DMA read/write requests queued within the Root-Complex before completing the translation enable command and reflecting the status of the command through the TES field in the Global Status register. Unfortunately, some integrated graphic devices fail to do so after some kind of power state transition. As the result, the system might stuck in iommu_disable_translati on(), waiting for the completion of TE transition. This adds RPLS to a quirk list for those devices and skips TE disabling if the qurik hits. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4898 Tested-by: Raviteja Goud Talla <ravitejax.goud.talla@xxxxxxxxx> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@xxxxxxxxx> --- drivers/iommu/intel/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 639e4438827e..bd6dac90a948 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -5741,7 +5741,7 @@ static void quirk_igfx_skip_te_disable(struct pci_dev *dev) ver = (dev->device >> 8) & 0xff; if (ver != 0x45 && ver != 0x46 && ver != 0x4c && ver != 0x4e && ver != 0x8a && ver != 0x98 && - ver != 0x9a) + ver != 0x9a && ver != 0xa7) return; if (risky_device(dev)) -- 2.34.1
