Re: [PATCH v3] drm/i915/display/vrr: Reset VRR capable property on a long hpd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 17 Feb 2022, "Navare, Manasi" <manasi.d.navare@xxxxxxxxx> wrote:
> Hi Jani,
>
> This addresses the review comments, could you please take a look at thsi patch?

Sorry for the delay,

Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>


>
> Manasi
>
> On Tue, Feb 15, 2022 at 12:26:01PM -0800, Manasi Navare wrote:
>> With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
>> When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
>> in the DPCD. Currently the driver parses that onevery HPD but fails to reset
>> the corresponding VRR Capable Connector property.
>> Hence the userspace still sees this as VRR Capable panel which is incorrect.
>> 
>> Fix this by explicitly resetting the connector property.
>> 
>> v2: Reset vrr capable if status == connector_disconnected
>> v3: Use i915 and use bool vrr_capable (Jani Nikula)
>> v4: Move vrr_capable to after update modes call (Jani N)
>> Remove the redundant comment (Jan N)
>> 
>> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
>> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
>> ---
>>  drivers/gpu/drm/i915/display/intel_dp.c | 17 +++++++++++++----
>>  1 file changed, 13 insertions(+), 4 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
>> index 1046e7fe310a..929e9b6febf1 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> @@ -4455,6 +4455,12 @@ intel_dp_detect(struct drm_connector *connector,
>>  		memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
>>  		memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
>>  
>> +		/* Reset VRR Capable property */
>> +		drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s] VRR capable: FALSE\n",
>> +			    connector->base.id, connector->name);
>> +		drm_connector_set_vrr_capable_property(connector,
>> +						       false);
>> +
>>  		if (intel_dp->is_mst) {
>>  			drm_dbg_kms(&dev_priv->drm,
>>  				    "MST device may have disappeared %d vs %d\n",
>> @@ -4569,15 +4575,18 @@ static int intel_dp_get_modes(struct drm_connector *connector)
>>  {
>>  	struct intel_connector *intel_connector = to_intel_connector(connector);
>>  	struct edid *edid;
>> +	struct drm_i915_private *i915 = to_i915(connector->dev);
>>  	int num_modes = 0;
>>  
>>  	edid = intel_connector->detect_edid;
>>  	if (edid) {
>> -		num_modes = intel_connector_update_modes(connector, edid);
>> +		bool vrr_capable;
>>  
>> -		if (intel_vrr_is_capable(connector))
>> -			drm_connector_set_vrr_capable_property(connector,
>> -							       true);
>> +		num_modes = intel_connector_update_modes(connector, edid);
>> +		vrr_capable = intel_vrr_is_capable(connector);
>> +		drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] VRR capable: %s\n",
>> +			    connector->base.id, connector->name, yesno(vrr_capable));
>> +		drm_connector_set_vrr_capable_property(connector, vrr_capable);
>>  	}
>>  
>>  	/* Also add fixed mode, which may or may not be present in EDID */
>> -- 
>> 2.19.1
>> 

-- 
Jani Nikula, Intel Open Source Graphics Center



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux