On Tue, 25 Jan 2022, Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Lift the dsc/joiner enable up from the wonky places where it
> currently sits (ddi .pre_enable() or icl_ddi_bigjoiner_pre_enable())
> into hsw_crtc_enable() where we write the other per-pipe stuff
> as well. Makes the transcoder vs. pipe split less confusing.
>
> For DSI this results in slight reordering between the dsc/joiner
> enable vs. transcoder timings setup, but I can't really think
> why that should cause any issues since the transcoder isn't yet
> enabled at that point.
>
> v2: Take care of dsi (Jani)
>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
One question inline.
> ---
> drivers/gpu/drm/i915/display/icl_dsi.c | 2 --
> drivers/gpu/drm/i915/display/intel_ddi.c | 6 ------
> drivers/gpu/drm/i915/display/intel_display.c | 12 +++++-------
> 3 files changed, 5 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 95f49535fa6e..16a611f7d659 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1233,8 +1233,6 @@ static void gen11_dsi_pre_enable(struct intel_atomic_state *state,
>
> intel_dsc_dsi_pps_write(encoder, pipe_config);
>
> - intel_dsc_enable(pipe_config);
> -
> /* step6c: configure transcoder timings */
> gen11_dsi_set_transcoder_timings(encoder, pipe_config);
> }
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 2f20abc5122d..5d1f7d6218c5 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -2425,9 +2425,6 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
> intel_ddi_enable_fec(encoder, crtc_state);
>
> intel_dsc_dp_pps_write(encoder, crtc_state);
> -
> - if (!crtc_state->bigjoiner)
> - intel_dsc_enable(crtc_state);
> }
>
> static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
> @@ -2493,9 +2490,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
> intel_ddi_enable_pipe_clock(encoder, crtc_state);
>
> intel_dsc_dp_pps_write(encoder, crtc_state);
> -
> - if (!crtc_state->bigjoiner)
> - intel_dsc_enable(crtc_state);
> }
>
> static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state,
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index d2906434ab3f..13b1de03640d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -1974,7 +1974,6 @@ static void hsw_set_frame_start_delay(const struct intel_crtc_state *crtc_state)
> static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state,
> const struct intel_crtc_state *crtc_state)
> {
> - struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> struct intel_crtc_state *master_crtc_state;
> struct intel_crtc *master_crtc;
> struct drm_connector_state *conn_state;
> @@ -2004,12 +2003,6 @@ static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state,
>
> if (crtc_state->bigjoiner_slave)
> intel_encoders_pre_enable(state, master_crtc);
> -
> - /* need to enable VDSC, which we skipped in pre-enable */
> - intel_dsc_enable(crtc_state);
> -
> - if (DISPLAY_VER(dev_priv) >= 13)
> - intel_uncompressed_joiner_enable(crtc_state);
> }
>
> static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_state)
> @@ -2057,6 +2050,11 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
> icl_ddi_bigjoiner_pre_enable(state, new_crtc_state);
> }
>
> + intel_dsc_enable(new_crtc_state);
> +
> + if (DISPLAY_VER(dev_priv) >= 13)
> + intel_uncompressed_joiner_enable(new_crtc_state);
> +
Should this call be moved inside intel_dsc_enable()? I mean it's not
compression, but it's the same splitter/joiner/etc. block that handles
all of this?
BR,
Jani.
> intel_set_pipe_src_size(new_crtc_state);
> if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> bdw_set_pipemisc(new_crtc_state);
--
Jani Nikula, Intel Open Source Graphics Center
