On 1/13/2022 09:34, Matthew Brost wrote:
On Thu, Jan 13, 2022 at 09:33:12AM -0800, John Harrison wrote:
On 1/11/2022 15:11, Matthew Brost wrote:
Add a cancel request selftest that results in an engine reset to cancel
the request as it is non-preemptable. Also insert a NOP request after
the cancelled request and confirm that it completes successfully.
v2:
(Tvrtko)
- Skip test if preemption timeout compiled out
- Skip test if engine reset isn't supported
- Update debug prints to be more descriptive
v3:
- Add comment explaining test
Signed-off-by: Matthew Brost <matthew.brost@xxxxxxxxx>
---
drivers/gpu/drm/i915/selftests/i915_request.c | 117 ++++++++++++++++++
1 file changed, 117 insertions(+)
diff --git a/drivers/gpu/drm/i915/selftests/i915_request.c b/drivers/gpu/drm/i915/selftests/i915_request.c
index 7f66f6d299b26..f78de99d5ae1e 100644
--- a/drivers/gpu/drm/i915/selftests/i915_request.c
+++ b/drivers/gpu/drm/i915/selftests/i915_request.c
@@ -782,6 +782,115 @@ static int __cancel_completed(struct intel_engine_cs *engine)
return err;
}
+/*
+ * Test to prove a non-preemptable request can be cancelled and a subsequent
+ * request on the same context can successfully complete after cancallation.
cancellation
Yep.
+ *
+ * Testing methodology is to create non-preemptable request and submit it,
a non-preemptible
Yep.
+ * wait for spinner to start, create a NOP request and submit it, cancel the
+ * spinner, wait for spinner to complete and verify it failed with an error,
+ * finally wait for NOP request to complete verify it succeeded without an
+ * error. Preemption timeout also reduced / restored so test runs in a timely
+ * maner.
+ */
+static int __cancel_reset(struct drm_i915_private *i915,
+ struct intel_engine_cs *engine)
+{
+ struct intel_context *ce;
+ struct igt_spinner spin;
+ struct i915_request *rq, *nop;
+ unsigned long preempt_timeout_ms;
+ int err = 0;
+
+ if (!CONFIG_DRM_I915_PREEMPT_TIMEOUT ||
Does this matter? The test is overriding the default anyway.
Yes. Execlists don't try to preempt anything if
CONFIG_DRM_I915_PREEMPT_TIMEOUT is turned off. If we wan't to avoid the
cancelation doing a full GT reset, CONFIG_DRM_I915_PREEMPT_TIMEOUT
should be turned on.
Hmm, I would read that as a bug. The description for the config
parameter is:
"This is adjustable via
/sys/class/drm/card?/engine/*/preempt_timeout_ms
May be 0 to disable the timeout.
The compiled in default may get overridden at driver probe
time on
certain platforms and certain engines which will be reflected
in the
sysfs control."
I would take that as meaning that even if the compiled in default is
zero, the user or even the i915 driver itself could override that at
runtime and enable pre-emption again. So having any code use this as a
flag is broken. Indeed, any code other than
'engine->default_preempt_timeout = CONFIG_PREEMPT_TIMEOUT' is broken, IMHO.
But maybe that's for a different patch. If the driver is already
behaving badly and doing the correct thing here will actually cause test
failures then you can't really do much other than follow the existing
bad behaviour.
John.
+ !intel_has_reset_engine(engine->gt))
+ return 0;
+
+ preempt_timeout_ms = engine->props.preempt_timeout_ms;
+ engine->props.preempt_timeout_ms = 100;
+
+ if (igt_spinner_init(&spin, engine->gt))
+ goto out_restore;
+
+ ce = intel_context_create(engine);
+ if (IS_ERR(ce)) {
+ err = PTR_ERR(ce);
+ goto out_spin;
+ }
+
+ rq = igt_spinner_create_request(&spin, ce, MI_NOOP);
+ if (IS_ERR(rq)) {
+ err = PTR_ERR(rq);
+ goto out_ce;
+ }
+
+ pr_debug("%s: Cancelling active non-preemptable request\n",
+ engine->name);
+ i915_request_get(rq);
+ i915_request_add(rq);
+ if (!igt_wait_for_spinner(&spin, rq)) {
+ struct drm_printer p = drm_info_printer(engine->i915->drm.dev);
+
+ pr_err("Failed to start spinner on %s\n", engine->name);
+ intel_engine_dump(engine, &p, "%s\n", engine->name);
+ err = -ETIME;
+ goto out_rq;
+ }
+
+ nop = intel_context_create_request(ce);
+ if (IS_ERR(nop))
+ goto out_nop;
Should be out_rq?
Yes, it should.
Matt
John.
+ i915_request_get(nop);
+ i915_request_add(nop);
+
+ i915_request_cancel(rq, -EINTR);
+
+ if (i915_request_wait(rq, 0, HZ) < 0) {
+ struct drm_printer p = drm_info_printer(engine->i915->drm.dev);
+
+ pr_err("%s: Failed to cancel hung request\n", engine->name);
+ intel_engine_dump(engine, &p, "%s\n", engine->name);
+ err = -ETIME;
+ goto out_nop;
+ }
+
+ if (rq->fence.error != -EINTR) {
+ pr_err("%s: fence not cancelled (%u)\n",
+ engine->name, rq->fence.error);
+ err = -EINVAL;
+ goto out_nop;
+ }
+
+ if (i915_request_wait(nop, 0, HZ) < 0) {
+ struct drm_printer p = drm_info_printer(engine->i915->drm.dev);
+
+ pr_err("%s: Failed to complete nop request\n", engine->name);
+ intel_engine_dump(engine, &p, "%s\n", engine->name);
+ err = -ETIME;
+ goto out_nop;
+ }
+
+ if (nop->fence.error != 0) {
+ pr_err("%s: Nop request errored (%u)\n",
+ engine->name, nop->fence.error);
+ err = -EINVAL;
+ }
+
+out_nop:
+ i915_request_put(nop);
+out_rq:
+ i915_request_put(rq);
+out_ce:
+ intel_context_put(ce);
+out_spin:
+ igt_spinner_fini(&spin);
+out_restore:
+ engine->props.preempt_timeout_ms = preempt_timeout_ms;
+ if (err)
+ pr_err("%s: %s error %d\n", __func__, engine->name, err);
+ return err;
+}
+
static int live_cancel_request(void *arg)
{
struct drm_i915_private *i915 = arg;
@@ -814,6 +923,14 @@ static int live_cancel_request(void *arg)
return err;
if (err2)
return err2;
+
+ /* Expects reset so call outside of igt_live_test_* */
+ err = __cancel_reset(i915, engine);
+ if (err)
+ return err;
+
+ if (igt_flush_test(i915))
+ return -EIO;
}
return 0;
