Re: [PATCH v2 1/2] x86/quirks: Fix logic to apply quirk once

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 06, 2022 at 03:58:50PM -0600, Bjorn Helgaas wrote:
On Wed, Jan 05, 2022 at 04:36:53PM -0800, Lucas De Marchi wrote:
When using QFLAG_APPLY_ONCE we make sure the quirk is called only once.
This is useful when it's enough one device to trigger a certain
condition or when the resource in each that applies is global to the
system rather than local to the device.

However we call the quirk handler based on vendor, class, and device,
allowing the specific handler to do additional filtering. In that case
check_dev_quirk() may incorrectly mark the quirk as applied when it's
not: the quirk was called, but may not have been applied due to the
additional filter.

This is particularly bad for intel_graphics_quirks() that uses
PCI_ANY_ID and then compares with a long list of devices. This hasn't
been problematic so far because those devices are integrated GPUs and
there can only be one in the system.  However as Intel starts to
release discrete cards, this condition is no longer true and we fail to
reserve the stolen memory (for the integrated GPU) depending on the bus
topology: if the traversal finds the discrete card first, for which
there is no system stolen memory, we will fail to reserve it for the
integrated card.

This fixes the stolen memory reservation for an Alderlake-P system with
one additional Intel discrete GPU (DG2 in this case, but applies for
any of them). In this system we have:

	- 00:01.0 Bridge
	  `- 03:00.0 DG2
	- 00:02.0 Alderlake-P's integrated GPU

Since we do a depth-first traversal, when we call the handler because of
DG2 we were marking it as already being applied and never reserving the
stolen memory for Alderlake-P.

Since there are just a few quirks using the QFLAG_APPLY_ONCE logic and
that is even the only flag, just use a static local variable in the
quirk function itself. This allows to mark the quirk as applied only
when it really is. As pointed out by Bjorn Helgaas, this is also more in
line with the PCI fixups as done by pci_do_fixups().

Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
---

v2: instead of changing all quirks to return if it was successfully
applied, remove the flag infra and use a static local variable to mark
quirks already applied (suggested by Bjorn Helgaas).

 arch/x86/kernel/early-quirks.c | 60 ++++++++++++++++++++--------------
 1 file changed, 36 insertions(+), 24 deletions(-)

diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 391a4e2b8604..102ecd0a910e 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -57,12 +57,18 @@ static void __init fix_hypertransport_config(int num, int slot, int func)
 static void __init via_bugs(int  num, int slot, int func)
 {
 #ifdef CONFIG_GART_IOMMU
+	static bool quirk_applied __initdata;
+
+	if (quirk_applied)
+		return;

IMO this probably is better than using QFLAG_APPLY_ONCE, etc.

But this patch has the mechanical changes related to QFLAG_APPLY_ONCE,
which I think are useful but not very interesting and not a fix for
something that's broken, mixed together with the *important* change
that actually fixes a problem on Alderlake.

In general I agree with the statement and also ask people to follow that
logic, but here I thought it was small enough to be considered as a
whole.  Here is what I could do to split it up further in a way that is
not going in a different direction:

1) add the static local only to intel graphics quirk  and remove the
flag from this item
2 and 3) add the static local to other functions and remove the flag
from those items
4) remove the flag from the table, the defines and its usage.
5) fix the coding style (to be clear, it's already wrong, not
something wrong introduced here... maybe could be squashed in (4)?)

thoughts?


Those two things need to be separate patches.  A patch that fixes a
problem should be as small as possible so it's easy to understand and
backport.

The subject line of this patch doesn't say anything at all about
Alderlake.  Splitting into two patches will make the subject lines
more useful.

Alderlake is the platform in which it was reproduced, but could very
well be any other platform with Intel integrated graphics + Intel
discrete graphics. So I described the concrete reproducer in the commit
message rather than giving the impression this would be the only case
the current logic is broken.

thanks,
Lucas De Marchi


Bjorn



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux