Re: [PATCH 2/9] drm/i915: Clean up PIPEMISC register defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 12, 2021 at 09:38:06PM +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> 
> Use REG_BIT() & co. for PIPEMISC* bits, and while at it
> fill in the missing dithering bits since we already had some
> of them defined.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 18 +++++-----
>  drivers/gpu/drm/i915/i915_reg.h              | 35 +++++++++++---------
>  2 files changed, 28 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 6073f94632ab..e293241450b1 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3724,18 +3724,18 @@ static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state)
>  
>  	switch (crtc_state->pipe_bpp) {
>  	case 18:
> -		val |= PIPEMISC_6_BPC;
> +		val |= PIPEMISC_BPC_6;
>  		break;
>  	case 24:
> -		val |= PIPEMISC_8_BPC;
> +		val |= PIPEMISC_BPC_8;
>  		break;
>  	case 30:
> -		val |= PIPEMISC_10_BPC;
> +		val |= PIPEMISC_BPC_10;
>  		break;
>  	case 36:
>  		/* Port output 12BPC defined for ADLP+ */
>  		if (DISPLAY_VER(dev_priv) > 12)
> -			val |= PIPEMISC_12_BPC_ADLP;
> +			val |= PIPEMISC_BPC_12_ADLP;

while on it, I wonder if we could remove this "ADLP" suffix.

First because prefix seems to be the most used case for the platform.
But also because there's a clear if here and a clear comment in the definition.
(Btw, I'd prefer the ver >= 13 than > 12 to be really clear :/)

>  		break;
>  	default:
>  		MISSING_CASE(crtc_state->pipe_bpp);
> @@ -3771,7 +3771,7 @@ static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state)
>  		}
>  
>  		intel_de_rmw(dev_priv, PIPE_MISC2(crtc->pipe),
> -			     PIPE_MISC2_UNDERRUN_BUBBLE_COUNTER_MASK,
> +			     PIPE_MISC2_BUBBLE_COUNTER_MASK,
>  			     scaler_in_use ? PIPE_MISC2_BUBBLE_COUNTER_SCALER_EN :
>  			     PIPE_MISC2_BUBBLE_COUNTER_SCALER_DIS);
>  	}
> @@ -3787,11 +3787,11 @@ int bdw_get_pipemisc_bpp(struct intel_crtc *crtc)
>  	tmp = intel_de_read(dev_priv, PIPEMISC(crtc->pipe));
>  
>  	switch (tmp & PIPEMISC_BPC_MASK) {
> -	case PIPEMISC_6_BPC:
> +	case PIPEMISC_BPC_6:
>  		return 18;
> -	case PIPEMISC_8_BPC:
> +	case PIPEMISC_BPC_8:
>  		return 24;
> -	case PIPEMISC_10_BPC:
> +	case PIPEMISC_BPC_10:
>  		return 30;
>  	/*
>  	 * PORT OUTPUT 12 BPC defined for ADLP+.
> @@ -3803,7 +3803,7 @@ int bdw_get_pipemisc_bpp(struct intel_crtc *crtc)
>  	 * on older platforms, need to find a workaround for 12 BPC
>  	 * MIPI DSI HW readout.
>  	 */
> -	case PIPEMISC_12_BPC_ADLP:
> +	case PIPEMISC_BPC_12_ADLP:
>  		if (DISPLAY_VER(dev_priv) > 12)
>  			return 36;
>  		fallthrough;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index f5d54ed2efc1..e300a202ce2d 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6308,32 +6308,35 @@ enum {
>  
>  #define _PIPE_MISC_A			0x70030
>  #define _PIPE_MISC_B			0x71030
> -#define   PIPEMISC_YUV420_ENABLE	(1 << 27) /* glk+ */
> -#define   PIPEMISC_YUV420_MODE_FULL_BLEND (1 << 26) /* glk+ */
> -#define   PIPEMISC_HDR_MODE_PRECISION	(1 << 23) /* icl+ */
> -#define   PIPEMISC_OUTPUT_COLORSPACE_YUV  (1 << 11)
> -#define   PIPEMISC_PIXEL_ROUNDING_TRUNC	REG_BIT(8) /* tgl+ */
> +#define   PIPEMISC_YUV420_ENABLE		REG_BIT(27) /* glk+ */
> +#define   PIPEMISC_YUV420_MODE_FULL_BLEND	REG_BIT(26) /* glk+ */
> +#define   PIPEMISC_HDR_MODE_PRECISION		REG_BIT(23) /* icl+ */
> +#define   PIPEMISC_OUTPUT_COLORSPACE_YUV	REG_BIT(11)
> +#define   PIPEMISC_PIXEL_ROUNDING_TRUNC		REG_BIT(8) /* tgl+ */
>  /*
>   * For Display < 13, Bits 5-7 of PIPE MISC represent DITHER BPC with
>   * valid values of: 6, 8, 10 BPC.
>   * ADLP+, the bits 5-7 represent PORT OUTPUT BPC with valid values of:
>   * 6, 8, 10, 12 BPC.
>   */
> -#define   PIPEMISC_BPC_MASK		(7 << 5)
> -#define   PIPEMISC_8_BPC		(0 << 5)
> -#define   PIPEMISC_10_BPC		(1 << 5)
> -#define   PIPEMISC_6_BPC		(2 << 5)
> -#define   PIPEMISC_12_BPC_ADLP		(4 << 5) /* adlp+ */
> -#define   PIPEMISC_DITHER_ENABLE	(1 << 4)
> -#define   PIPEMISC_DITHER_TYPE_MASK	(3 << 2)
> -#define   PIPEMISC_DITHER_TYPE_SP	(0 << 2)
> +#define   PIPEMISC_BPC_MASK			REG_GENMASK(7, 5)
> +#define   PIPEMISC_BPC_8			REG_FIELD_PREP(PIPEMISC_BPC_MASK, 0)
> +#define   PIPEMISC_BPC_10			REG_FIELD_PREP(PIPEMISC_BPC_MASK, 1)
> +#define   PIPEMISC_BPC_6			REG_FIELD_PREP(PIPEMISC_BPC_MASK, 2)
> +#define   PIPEMISC_BPC_12_ADLP			REG_FIELD_PREP(PIPEMISC_BPC_MASK, 4) /* adlp+ */
> +#define   PIPEMISC_DITHER_ENABLE		REG_BIT(4)
> +#define   PIPEMISC_DITHER_TYPE_MASK		REG_GENMASK(3, 2)
> +#define   PIPEMISC_DITHER_TYPE_SP		REG_FIELD_PREP(PIPEMISC_DITHER_TYPE_MASK, 0)
> +#define   PIPEMISC_DITHER_TYPE_ST1		REG_FIELD_PREP(PIPEMISC_DITHER_TYPE_MASK, 1)
> +#define   PIPEMISC_DITHER_TYPE_ST2		REG_FIELD_PREP(PIPEMISC_DITHER_TYPE_MASK, 2)
> +#define   PIPEMISC_DITHER_TYPE_TEMP		REG_FIELD_PREP(PIPEMISC_DITHER_TYPE_MASK, 3)
>  #define PIPEMISC(pipe)			_MMIO_PIPE2(pipe, _PIPE_MISC_A)
>  
>  #define _PIPE_MISC2_A					0x7002C
>  #define _PIPE_MISC2_B					0x7102C
> -#define   PIPE_MISC2_BUBBLE_COUNTER_SCALER_EN		(0x50 << 24)
> -#define   PIPE_MISC2_BUBBLE_COUNTER_SCALER_DIS		(0x14 << 24)
> -#define   PIPE_MISC2_UNDERRUN_BUBBLE_COUNTER_MASK	(0xff << 24)
> +#define   PIPE_MISC2_BUBBLE_COUNTER_MASK	REG_GENMASK(31, 24)
> +#define   PIPE_MISC2_BUBBLE_COUNTER_SCALER_EN	REG_FIELD_PREP(PIPE_MISC2_BUBBLE_COUNTER_MASK, 80)
> +#define   PIPE_MISC2_BUBBLE_COUNTER_SCALER_DIS	REG_FIELD_PREP(PIPE_MISC2_BUBBLE_COUNTER_MASK, 20)
>  #define PIPE_MISC2(pipe)					_MMIO_PIPE2(pipe, _PIPE_MISC2_A)
>  
>  /* Skylake+ pipe bottom (background) color */
> -- 
> 2.32.0
> 



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux