From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Currently we're only calling intel_update_active_dpll() for the bigjoiner master pipe but not for the slave. With TC ports this leads to the two pipes end up trying to use different PLLs (TC vs. TBT). What's worse we're enabling the PLL that didn't get intel_update_active_dpll() called on it at the spot where we need the clocks turned on. So we turn on the wrong PLL and the DDI is now trying to source its clock from the other PLL which is still disabled. Naturally that doesn't end so well and the DDI fails to start up. The state checker also gets a bit unhappy (which is a good thing) when it notices that one of the pipes was using the wrong PLL. Let's fix this by remembering to call intel_update_active_dpll() for both pipes. That should get the correct PLL turned on when we need it, and the state checker should also be happy. Cc: Imre Deak <imre.deak@xxxxxxxxx> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4434 Fixes: e12d6218fda2 ("drm/i915: Reduce bigjoiner special casing") Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_ddi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 145d51ac43a3..f9e7e3d1c7d0 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3140,8 +3140,14 @@ intel_ddi_update_prepare(struct intel_atomic_state *state, intel_tc_port_get_link(enc_to_dig_port(encoder), required_lanes); - if (crtc_state && crtc_state->hw.active) + if (crtc_state && crtc_state->hw.active) { + struct intel_crtc *slave_crtc = crtc_state->bigjoiner_linked_crtc; + intel_update_active_dpll(state, crtc, encoder); + + if (slave_crtc) + intel_update_active_dpll(state, slave_crtc, encoder); + } } static void -- 2.32.0
