Re: [PATCH] drm/i915/selftests: Allow engine reset failure to do a GT reset in hangcheck selftest

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, John,

On 10/26/21 21:55, John Harrison wrote:
On 10/21/2021 23:23, Thomas Hellström wrote:
On 10/21/21 22:37, Matthew Brost wrote:
On Thu, Oct 21, 2021 at 08:15:49AM +0200, Thomas Hellström wrote:
Hi, Matthew,

On Mon, 2021-10-11 at 16:47 -0700, Matthew Brost wrote:
The hangcheck selftest blocks per engine resets by setting magic bits
in
the reset flags. This is incorrect for GuC submission because if the
GuC
fails to reset an engine we would like to do a full GT reset. Do no
set
these magic bits when using GuC submission.

Side note this lockless algorithm with magic bits to block resets
really
should be ripped out.

Lockless algorithm aside, from a quick look at the code in
intel_reset.c it appears to me like the interface that falls back to a
full GT reset is intel_gt_handle_error() whereas intel_engine_reset()
is explicitly intended to not do that, so is there a discrepancy
between GuC and non-GuC here?

With GuC submission when an engine reset fails, we get an engine reset
failure notification which triggers a full GT reset
(intel_guc_engine_failure_process_msg in intel_guc_submission.c). That
reset is blocking by setting these magic bits. Clearing the bits in this
function doesn't seem to unblock that reset either, the driver tries to
unload with a worker blocked, and results in the blow up. Something with
this lockless algorithm could be wrong as clear of the bit should
unlblock the reset but it is doesn't. We can look into that but in the
meantime we need to fix this test to be able to fail gracefully and not
crash CI.

Yeah, for that lockless algorithm if needed, we might want to use a ww_mutex per engine or something, but point was that AFAICT at least one of the tests that set those flags explicitly tested the functionality that no other engines than the intended one was reset when the intel_engine_reset() function was used, and then if GuC submission doesn't honor that, wouldn't a better approach be to make a code comment around intel_engine_reset() to explain the differences and disable that particular test for GuC?. Also wouldn't we for example we see a duplicated full GT reset with GuC if intel_engine_reset() fails as part of the intel_gt_handle_error() function?
Re-reading this thread, I think there is a misunderstanding.

The selftests themselves have already been updated to support GuC based engine resets. That is done by submitting a hanging context and letting the GuC detect the hang and issue a reset. There is no mechanism available for i915 to directly issue or request an engine based reset (because i915 does not know what is running on any given engine at any given time, being disconnected from the scheduler).

So the tests are already correctly testing per engine resets and do not go anywhere near either intel_engine_reset() or intel_gt_handle_error() when GuC submission is used. The problem is what happens if the engine reset fails (which supposedly can only happen with broken hardware). In that scenario, there is an asynchronous message from GuC to i915 to notify us of the failure. The KMD receives that notification and then (eventually) calls intel_gt_handle_error() to issue a full GT reset. However, that is blocked because the selftest is not expecting it and has vetoed the possibility.

This is where my understanding of the discussion differs. According to Matthew, the selftest actually proceeds to clear the bits, but the worker that calls into intel_gt_handle_error() never wakes up. (and that's probably due to clear_bit() being used instead of clear_and_wake_up_bit()).

And my problem with this particular patch is that it adds even more "if (!guc_submission)" which is already sprinkled all over the place in the selftests to the point that it becomes difficult to see what (if anything) the tests are really testing. For example igt_reset_nop_engine() from a cursory look looks like it's doing something but inside the engine loop it becomes clear that the test doesn't do *anything* except iterate over engines. Same for igt_reset_engines() in the !TEST_ACTIVE case and for igt_reset_idle_engine(). For some other tests the reset_count checks are gone, leaving only a test that we actually do a reset.

So if possible, as previously mentioned, I think a solution without adding more of this in the selftests is preferrable. To me the best option is probably be the one you suggest in your previous email: Don't wait on the I915_RESET_ENGINE bits with GuC in intel_gt_handle_error(), (or perhaps extract what's left in a separate function called from the GuC handler).

Thanks,

Thomas






[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux