On Wed, May 22, 2013 at 02:23:17PM -0300, Rodrigo Vivi wrote:
> According BSPec: "Workaround: Do not enable Render Command Streamer tracking for FBC.
> Instead insert a LRI to address 0x50380 with data 0x00000004 after the PIPE_CONTROL that
> follows each render submission."
>
> v2: Chris noticed that flush_domains check was missing here and also suggested to do
> LRI only when fbc is enabled. To avoid do a I915_READ on every flush lets use the
> module parameter check.
>
> Cc: Chris Wilson <chris at chris-wilson.co.uk>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 2 ++
> drivers/gpu/drm/i915/intel_pm.c | 2 +-
> drivers/gpu/drm/i915/intel_ringbuffer.c | 32 ++++++++++++++++++++++++++++++++
> 3 files changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index cc4c223..81ac584 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -977,6 +977,8 @@
> /* Framebuffer compression for Ivybridge */
> #define IVB_FBC_RT_BASE 0x7020
>
> +#define MSG_FBC_REND_STATE 0x50380
> +#define FBC_REND_NUKE (1<<2)
>
> #define _HSW_PIPE_SLICE_CHICKEN_1_A 0x420B0
> #define _HSW_PIPE_SLICE_CHICKEN_1_B 0x420B4
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 1879188..e830a9b 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -274,7 +274,7 @@ static void gen7_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
> struct drm_i915_gem_object *obj = intel_fb->obj;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>
> - I915_WRITE(IVB_FBC_RT_BASE, obj->gtt_offset | ILK_FBC_RT_VALID);
> + I915_WRITE(IVB_FBC_RT_BASE, obj->gtt_offset);
>
> if (!intel_edp_is_psr_enabled(dev))
> I915_WRITE(ILK_DPFC_CONTROL, DPFC_CTL_EN | DPFC_CTL_LIMIT_1X |
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> index 3d2c236..905d372 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> @@ -280,6 +280,30 @@ gen7_render_ring_cs_stall_wa(struct intel_ring_buffer *ring)
> return 0;
> }
>
> +static int gen7_ring_fbc_flush(struct intel_ring_buffer *ring)
> +{
> + struct drm_device *dev = ring->dev;
> + int ret;
> +
> + if (i915_enable_fbc == 0)
> + return 0;
> +
> + if (i915_enable_fbc < 0 && !IS_HASWELL(dev))
> + return 0;
> +
> + ret = intel_ring_begin(ring, 4);
> + if (ret)
> + return ret;
> +
> + intel_ring_emit(ring, MI_NOOP);
> + intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
> + intel_ring_emit(ring, MSG_FBC_REND_STATE);
> + intel_ring_emit(ring, FBC_REND_NUKE);
> + intel_ring_advance(ring);
> +
> + return 0;
> +}
> +
Can you document you're implementing WaFbcNukeOn3DBlt for ivb/hsw/vlv
here using the newly introduced w/a tags?
> static int
> gen7_render_ring_flush(struct intel_ring_buffer *ring,
> u32 invalidate_domains, u32 flush_domains)
> @@ -336,6 +360,9 @@ gen7_render_ring_flush(struct intel_ring_buffer *ring,
> intel_ring_emit(ring, 0);
> intel_ring_advance(ring);
>
> + if (flush_domains)
> + return gen7_ring_fbc_flush(ring);
> +
> return 0;
> }
>
> @@ -1623,6 +1650,7 @@ gen6_ring_dispatch_execbuffer(struct intel_ring_buffer *ring,
> static int blt_ring_flush(struct intel_ring_buffer *ring,
> u32 invalidate, u32 flush)
> {
> + struct drm_device *dev = ring->dev;
> uint32_t cmd;
> int ret;
>
> @@ -1645,6 +1673,10 @@ static int blt_ring_flush(struct intel_ring_buffer *ring,
> intel_ring_emit(ring, 0);
> intel_ring_emit(ring, MI_NOOP);
> intel_ring_advance(ring);
> +
> + if (IS_GEN7(dev))
> + return gen7_ring_fbc_flush(ring);
> +
> return 0;
> }
>
> --
> 1.8.1.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
